Advertisement
Quick Links
AccessManager (radio) – MANUAL | 1
ORDER-CODES:
,
,
,
KXP-16-B
KXP-16-W
KXP-16-B-BLE
KXP-16-W-BLE
DATASHEET ACCESSMANAGER RADIO
KentixONE Operating mode
SiteManager Operation
Stand-alone operation
Further information on the operating mode
Overview
The Kentix AccessManager Radio is the management unit for Kentix DoorLock radio components
such as DoorLock-DC (door knob) or DoorLock-LE (door handle). Up to 16 DoorLock radio
components can be taught into the AccessManager radio. The AccessManager is network-compatible
© Kentix GmbH. This file was automatically generated on 2024-12-24 22:25:05. Please visit
docs.kentix.com
for the
latest documentation.
Advertisement
Related Manuals for Kentix KentixONE KXP-16-B
Summary of Contents for Kentix KentixONE KXP-16-B
- Page 1 Further information on the operating mode Overview The Kentix AccessManager Radio is the management unit for Kentix DoorLock radio components such as DoorLock-DC (door knob) or DoorLock-LE (door handle). Up to 16 DoorLock radio components can be taught into the AccessManager radio. The AccessManager is network-compatible ©...
- Page 2 Kentix accepts no liability for damage to the equipment or components resulting from incorrect installation. No liability is accepted for incorrectly programmed units. Kentix shall not be liable in the event of malfunctions, damage to property or other damage. Use of the products, transport and storage Protect the device during transport, storage and operation from Protect moisture, dirt and damage.
- Page 3 Electrical appliances and batteries must be disposed of separately from household waste. Connection and operating elements AccessManager (RADIO) front view Radio antenna (SMA screw antenna) Status LED (GREEN: Run) © Kentix GmbH. This file was automatically generated on 2024-12-24 22:25:05. Please visit docs.kentix.com for the latest documentation.
- Page 4 AccessManager (radio) – MANUAL | 4 AccessManager (RADIO) Rear view Reset button(reset to factory settings) Mounting bracket Default Setup sticker (IP address, MAC address, access data) © Kentix GmbH. This file was automatically generated on 2024-12-24 22:25:05. Please visit docs.kentix.com for the latest documentation.
- Page 5 Additional system components such as leakage sensors, door contacts or external alarms from UPS or air conditioning units can be connected via the Kentix system port. The system port has 2 digital inputs and 2 digital outputs which are available via a RJ45 socket.
- Page 6 The device loads the factory settings and performs a restart. After approx. 2 minutes, the device can be reached with the factory settings. © Kentix GmbH. This file was automatically generated on 2024-12-24 22:25:05. Please visit docs.kentix.com for the...
- Page 7 Before you start the configuration, make sure that the software is up to date on all network-enabled Kentix devices. The version status must be the same on all devices. You can download the latest software here: KentixONE © Kentix GmbH. This file was automatically generated on 2024-12-24 22:25:05. Please visit docs.kentix.com for the latest documentation.
Need help?
Do you have a question about the KentixONE KXP-16-B and is the answer not in the manual?
Questions and answers