Related Manuals for Tricel 102208
Summary of Contents for Tricel 102208
- Page 1 IP43 RATED COMMERCIAL ELECTRIC METER ENCLOSURE 500 x 750 x 300MM SINGLE DOOR COMPLIES TO IEC 62208:2011 STOCK CODE: 102208...
- Page 2 • Made from non-hygroscopic material ensuring minimum water absorption. • Constructed from halogen-free and self-extinguishing material. • UV protected. * Approximate dimensions. In accordance with Tricel’s normal policy of product development these specifications are subject to change without notice. TRICEL UK TRICEL IRL Tel: Tel:...
- Page 3 IP43 KIOSK SINGLE DOOR BY TRICEL 500x750x300mm FLAT PACK COMPLIANT TO IEC 62208:2011 STOCK CODE: EB0028 ASSEMBLY INSTRUCTIONS SEAL AND KIOSK BODY 102208-1100365/2-JUN2024 222169-1073756/3-MBD-NOV2022...
- Page 4 IP43 KIOSK SINGLE DOOR BY TRICEL 500x750x300mm FLAT PACK COMPLIANT TO IEC 62208:2011 STOCK CODE: EB0028 SEAL ASSEMBLY INSTRUCTIONS BOTTOM SEAL Tools required: Scissor or Knife Step 1: • Get the bag labelled (BO-1-Bottom) • Trim seals to required length along front and back sections. Do not cover tabs.
- Page 5 IP43 KIOSK SINGLE DOOR BY TRICEL 500x750x300mm FLAT PACK COMPLIANT TO IEC 62208:2011 STOCK CODE: EB0028 SEAL ASSEMBLY INSTRUCTIONS RIGHT SEAL Step 2: Once two side panels are fitted you need two seals on either side panel, a seal for the front and the rear of both panels will be needed.
- Page 6 IP43 KIOSK SINGLE DOOR BY TRICEL 500x750x300mm FLAT PACK COMPLIANT TO IEC 62208:2011 STOCK CODE: EB0028 SEAL ASSEMBLY INSTRUCTIONS LEFT SEAL Step 2: • Get the bag labelled (BO-4-Left&Right) and measure the length from top to bottom of the panel.
- Page 7 IP43 KIOSK SINGLE DOOR BY TRICEL 500x750x300mm FLAT PACK COMPLIANT TO IEC 62208:2011 STOCK CODE: EB0028 SEAL ASSEMBLY INSTRUCTIONS LEFT SEAL • Finally, add seal to the bottom panel and meet the seal at side panel. • Attach seal to the final left hand section as shown below.
- Page 8 IP43 KIOSK SINGLE DOOR BY TRICEL 500x750x300mm FLAT PACK COMPLIANT TO IEC 62208:2011 STOCK CODE: EB0028 SEAL ASSEMBLY INSTRUCTIONS TOP COVER SEAL Step 3: • To assemble the kiosk, get the top cover and the bag labelled (BO-3-Back). The seal is pre-cut for assembling.
- Page 9 IP43 KIOSK SINGLE DOOR BY TRICEL 500x750x300mm FLAT PACK COMPLIANT TO IEC 62208:2011 STOCK CODE: EB0028 SEAL ASSEMBLY INSTRUCTIONS TOP COVER SEAL Step 4: • When the top panel is fitted get the bag labelled (BO-2-TOP) and measure the sections along the top panel.
- Page 10 IP43 KIOSK SINGLE DOOR BY TRICEL 500x750x300mm FLAT PACK COMPLIANT TO IEC 62208:2011 STOCK CODE: EB0028 SEAL ASSEMBLY INSTRUCTIONS FINAL SEALING – TOP & BOTTOM PANEL Step 5: Bottom Panel • Get the bag labelled (BO-1-Bottom) and measure across until it meets the seal descending from the right-hand side panel.
- Page 11 IP43 KIOSK SINGLE DOOR BY TRICEL 500x750x300mm FLAT PACK COMPLIANT TO IEC 62208:2011 STOCK CODE: EB0028 KIOSK BODY ASSEMBLY INSTRUCTIONS 1. Assemble the 2 sides first. The pre-drilled holes with inserts are to be kept at the back of the base plate.
- Page 12 IP43 KIOSK SINGLE DOOR BY TRICEL 500x750x300mm FLAT PACK COMPLIANT TO IEC 62208:2011 STOCK CODE: EB0028 ASSEMBLY INSTRUCTIONS 4. Insert longer dowels at the top of the back plate. 5. Insert the top plate. 6. Insert the 4 screws to attach the top plate to the sides.
- Page 13 IP43 KIOSK SINGLE DOOR BY TRICEL 500x750x300mm FLAT PACK COMPLIANT TO IEC 62208:2011 STOCK CODE: EB0028 DOOR ASSEMBLY 1. To attach the door, push down the bottom hinges, it will be placed in the groove located at the bottom corner and top corner. Hinges to be turned 90⁰ to lock in place.
Need help?
Do you have a question about the 102208 and is the answer not in the manual?
Questions and answers