Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Madimack eliteCLEAR 26"
- Page 1 eliteCLEAR INSTALLATION MANUAL 26” 28”...
- Page 2 WELCOME This is the instruction manual for your Madimack EliteCLEAR Filter. It will help you understand its operation and maintenance, ensuring clean and clear pool water for your enjoyment. Madimack’s EliteCLEAR sand filter is designed to capture unwanted debris before it recirculates, ensuring your pool water stays debris-free.
- Page 3 CONTENTS PAGE Warnings Specifications Dimensions INSTALLATION Tools required Positioning Assembly Plumbing Connections OPERATION First Time Startup Technical Notes When to Backwash Performing a Backwash Multiport Valve Positions Maintenance Troubleshooting SPARE PARTS Multiport Valve Media Tank WARRANTY Warranty Information eliteCLEAR...
- Page 4 WARNINGS • Maximum working pressure: 50psi / 344Kpa • Maximum operation temp: 50°C • This filter operates under high pressure. Any air entering the system can become pressurised. Pressurised air can cause the valve of fittings to be blown off, which can result in severe injury, death, or property damage. •...
- Page 5 • Philips head screwdriver • Suitable solvent cement and primer • Madimack EcoBLEND media Positioning: • The filter must be installed on a flat and solid surface. Settling ground may cause movement over time which can damage equipment and pipework.
- Page 6 OPERATION First Time Startup 1. To prevent dust, dirt and debris entering the pool from the construction Madimack recommends to perform a backwash before running the filter. Refer to ‘Performing a backwash’ in the Technical Notes section. 2. Once the filter is in normal operation, note the pressure gauge reading. This is the ‘clean pressure’. This reading will vary depending on the pool’s pump and piping system.
- Page 7 MAINTENANCE • Check the pressure gauge is within limits • Check the pool water level Weekly • Clear the pump and skimmer baskets • Visual inspection for leaks • The recommended time between backwashing should be no longer than 4 weeks during the swimming season Monthly •...
- Page 8 SPARE PARTS Multiport Valve CODE DESCRIPTION CODE DESCRIPTION 01-0101 Handle 01-0113 Bulkhead assy 01-0104 Screw-handle 01-0119 Plug 01-0102 Washer-B 01-0118 Pressure gauge 01-0501 Function point-out panel 01-0120 Sight glass 01-0502 Lid assy 01-0121 Sight glass O-ring 01-0108 Washer-plastic 01-0122 Rotor 01-0106 Washer-S 01-0123...
- Page 9 Media Tank CODE DESCRIPTION CODE DESCRIPTION 01-09 01-05 Multiport valve 1.5” Tank 21” 01-05 01-09 Clip-L Tank 25” 01-05 01-09 Clip-R Tank 28” 01-05 02-09 Screw-clip Centre pipe 01-05 02-01 Nut-clip Lateral Assembly 02-09 02-01 Gasket of Flange Lateral 01-09 02-01 Tank 14”...
- Page 10 LIMITED WARRANTY Madimack warrants that its products are free from defects in materials and manufacture for a period of 4 years from the date of purchase, unless otherwise specified.
Need help?
Do you have a question about the eliteCLEAR 26" and is the answer not in the manual?
Questions and answers