Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for L2G bm ICM40
Summary of Contents for L2G bm ICM40
- Page 1 ICE BULLETS MAKER ICM40 Instruction Manual...
- Page 2 CONTENT 1. IMPORTANT SAFETY INSTRUCTIONS 2. FEATURES 3. NOTES BEFORE OPERATION 4. STRUCTURE 5. OPERATION PROCEDURES 6. MAINTENANCE 7. TECHNICAL PARAMETERS 8. CIRCUIT DIAGRAM 9. TROUBLE AND SHOOTING Thank you for selecting our Automatic Ice-Maker! To ensure the proper operation of this ice maker, please read the instruction carefully before use and please keep it for inspection in case troubles occur.
- Page 3 IMPORTANT SAFETY INSTRUCTIONS When using electrical applicances, basic safety precautions should be followed to reduce the risk of fire, electric shock, and injury to persons of property. Read all insctructions before using any appliance. • This appliance can be used by children aged from8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or insctruction concerning use of the appliance in a safe way and understand the hazards involved.
- Page 4 • Do not use other liquid to make the ice-cube other than water. • Do not cleann your ice maker with flammable fluids. The fumes can create afire hazard or explosion. • We do not recommend the use of an extension cord, as it may overheat and become a risk of fire. Unplug the ice maker before cleaning or making any repairs or servicing.
- Page 5 FEATURES Our Automatic ice makers are designed in cubic shape with the curved front panel and curved door (or stainless steel flat front panel and flat door) for nice appearance. Many advantages of the ice maker are available, such as ice making quickly, great ice making capacity, nice ice shape and ice dropping quickly.
- Page 6 STRUCTURE 1. Power Switch 7. Ice lever Sensor 2. Display Panel 8. Power Cord 3. Front Panel 9. Water Inlet Valve 4. Door 10. Drainage Tube 5. Ice Bouncing Shelf 11. Bottom Foot 6. Ice Storage Container OPERATION PROCEDURES 1. Unpack the ice maker from its carton, then remove the ice shovel, inlet/outlet tubes, and sealing washers, from the container in the ice maker where they are packed for transit.
- Page 7 8. Should the water supply be restricted or fail, the “water low” light will be lit. The ice maker will stop automatically. When the water supply is restored, wait for at least five minutes then re-start the ice maker. MAINTENANCE 1.
- Page 8 CIRCUIT DIAGRAM TROUBLE AND SHOOTING (for reference of users and technicians) TROUBLE CAUSE REMEDY The ice maker 1.The voltage is out of limitation. 1.Stop the ice maker and restart it until does not work 2.The ambient temperature is lower than the voltage is normal.
- Page 9 Unplug the power, check the tilting mo- lights on tor and the relative system. 3~5 minutes later restart the machine. L2G - BM PRODUCTIONS Tel : +33 4 72 23 23 98 17 avenue du 24 août 1944 Fax : +33 4 72 23 23 99 BP 90690 contact@L2Gfrance.fr...
Need help?
Do you have a question about the bm ICM40 and is the answer not in the manual?
Questions and answers