Theben theLeda S8-100 WH Manual

LED spotlight with
EN
motion detector
theLeda S8-100 WH
theLeda S8-100 BK
theLeda S17-100 WH
theLeda S17-100 BK
1. Basic safety information
Assembly and installation should only be carried
out by a qualified electrician, somebody who has
completed appropriate professional training and
has the knowledge and experience necessary to be
able to recognise and avoid the potential dangers
posed by electricity.
Before installation/disassembly, disconnect the
power supply and ensure that the parts are no
longer live.
Prior to start-up and using the product, read and
observe the operating instructions.
!
Only intended for installation out of arm's reach.
L The LED spotlight with motion detector (PIR) conforms to
EN 60598-1 and EN 60669-2-1 if correctly installed.
L Optional with corner angle (9070969/907098 and
distance frame (9070971/9070988).
2. Proper use
•
LED spotlight is used for lighting, depending on
presence and brightness
•
Device is for wall mounting inside and outside
•
For entrances, garages, gardens, corridors, parks, etc.
L Lamp cannot be replaced.
Replace entire spotlight if defective!
3. Connection
!
Secure device with an upstream type B or type C circuit
breaker (EN 60898-1) with a maximum of 10 A.
1020800
1020801
1020802
1020803
Standard connection
307622
27.07.2022
N
L
Master/Slave connection
L Max. 8 devices switchable as Master/Slave!
N L
Master/Master connection
Master-Master
N L
Time delay with master/master switching
If the devices are switched on via port L
the triggered device applies to all connected devices.
Time delay of 10 s at master 1
LUX
Master 1
10 s
Motion
Time delay of 20 s at master 2
LUX
Master 1
10 s
Motion
L
E
L
L
N
Master
L
N
E E
50 m
Master-Master
L N L
E
50 m
LED LUX
L
Motion
LED LUX
L
Motion
Slave
L
L
L
N
L
E
L
L
N
↓
the time delay of
LED
Master 2
20 s
L
LED
Master 2
20 s
L
1