Download
Share
Print this page
Chery Life DBB SSP KC SA10 0812DB Assembly Instructions Manual
  1. Manuals
  2. Brands
  3. Chery Manuals
  4. Outdoor Storage
  5. Life DBB SSP KC SA10 0812DB
  6. Assembly instructions manual
Chery Life DBB SSP KC SA10 0812DB Assembly Instructions Manual

Chery Life DBB SSP KC SA10 0812DB Assembly Instructions Manual

Plastic storage sheds 8*12ft
Hide thumbs

Advertisement

Quick Links

Download this manual
Thank you for choosing us!
Please let us know if you have any concerns.
CHERY INDUSTRIAL
www.cherylife.com
T: 888-473-8388
E:info@cherylifeus.com
The product comes in three boxes. Please install in a leveled
place.Make sure bolt the expansion screws into the ground to
prevent the wind from collapsing.
ASSEMBLY INSTRUCTIONS
Plastic Storage Sheds
8*12ft

Advertisement

loading
Need help?

Need help?

Do you have a question about the Life DBB SSP KC SA10 0812DB and is the answer not in the manual?

Questions and answers

Related Manuals for Chery Life DBB SSP KC SA10 0812DB

Summary of Contents for Chery Life DBB SSP KC SA10 0812DB

  • Page 1 ASSEMBLY INSTRUCTIONS Plastic Storage Sheds 8*12ft Thank you for choosing us! Please let us know if you have any concerns. CHERY INDUSTRIAL www.cherylife.com T: 888-473-8388 E:info@cherylifeus.com The product comes in three boxes. Please install in a leveled place.Make sure bolt the expansion screws into the ground to...
  • Page 2 ASSEMBLY INSTRUCTIONS 1.Please check the quantity of all parts before installation (refer to the Parts Lists) and the appearance of the products. Make sure the product is correct before installation. 2.Protect spare parts carefully in case any losing,scratch or demage occured during installation.
  • Page 3 ASSEMBLY INSTRUCTIONS Safety Precautions two adults We recommend to complete the installation. Two adults installed together will make the installation process easier and safer. The gloves must be carried to prevent hand cuts during installation. Take care when using power tools near water the use of a residual current device (RCD) is advised.
  • Page 4 ASSEMBLY INSTRUCTIONS 3. Leave enough space Operating space shall be reserved for external installation work. 4. Tools required for installation （Note: Installation requires two people to work together.） included included 5. Parts are placed after unpacking Don’t lean the panels to avoid distortion. 6.
  • Page 5 Ⅰ.【8x12ft Product Introduction】 Model：DBB_SSP_KC_SA10_0812DB Intelligent Plastic Storage Shed Size：92*140*95 in Color：Grey Base size：139*91 in Area covered：87.8 saquare feet 【 Plastic Storage Shed_8x12ft】...
  • Page 6 Ⅱ.Accessory & Parts (1) FLOOR Item no. Reference Image Qty. Item no. Reference Image Qty. F.1(kc) F.12(kc) F.13(kc) KCFFB.L8 F.3(kc812) F.14(kc812) KCFBC F.15(kc812) KCFRC F.17(kc) F.6(kc) F.18(kc) KCFFB.R8 F.19(kc) F.8(kc6) F.9(kc6) F.10(kc6) F.11(kc)
  • Page 7 WALL Item no. Reference Image Qty. Item no. Reference Image Qty. W.1(kc) W.12(kc) W.2(kc) W.13(kc) W.3(kc) W.14(kc) W.4(kc) W.15(kc) W.5(kc) VNR2.OUT W.6(kc) VNR2.IN W.16(kc) W.7(kc) W.8(kc) WIR2.OUT W.9(kc) WIR2.IN W.10(kc) WIR2.PC Rubber sealing stripe HD.1(kc) 2mm*5mm Rubber sealing stripe W.11(kc) 2mm*12mm...
  • Page 8 ROOF Item no. Reference Image Qty. Item no. Reference Image Qty. R.1(kc) R.5(kc) R.2(kc812) R.6(kc) KCRBLC HD.2(kc) HD.3(kc) FR.1(kc8) FR.2(kc816) HD.4(kc) FR.3(kc816) HD.5(kc) FR.4(kc) R.7(kc) FR.5(kc) R.8(kc812) FR.6(kc) KCRRC FR.7(kc812) KCRRH KCRBC.L FR.8(kc812) R.4(kc) KCRBC.R...
  • Page 9 Ⅱ.Accessory & Parts (2) ROOF DOOR Item no. Reference Image Qty. Item no. Reference Image Qty. FR.9(kc) D.1(kc) FR.10(kc) D.2(kc) FR.11(kc) D.3(kc) FR.12(kc) D.4(kc) FR.13(kc) HD.7(kc) FR.14(kc) D.5(kc) HD.6(kc) HD.8(kc) Rubber HD.9(kc) sealing stripe 20mm*2mm HD.10(kc) DH.5...
  • Page 10 ACCESSORY ACCESSORY Item no. Reference Image Qty. Item no. Reference Image Qty. FT.11 FT.1 X220 (3x6) (5x14) FT.12 FT.2 X353 (8x80) (3.9x12) FT.3 STICKER (3.9x30) FT.4 PADS (2.9x8) Pre-installed Install the FT.5 guide piece (2.9x20) FT.6 (4x14) FT.7 (6×40) FT.7A (M6) FT.8 (6x16)
  • Page 11 ASSEMBLY INSTRUCTIONS (kcFRC) F.3(kc812) (KCFFB.L8) (kcFFB.R8) F.1(kc) (kcFBC) F.6(kc) 2pcs 4pcs 1pcs 1pcs 1pcs 3pcs 2pcs KCFRC KCFBC F.6(kc) KCFRC F.6(kc) F.3(kc812) F.3(kc812) KCFBC KCFBC F.3(kc812) F.3(kc812) KCFFB.L8 F.1(kc) KCFFB.R8...
  • Page 12 ASSEMBLY INSTRUCTIONS (FT.3) (FT.1) 12pcs 2pcs FT.3 FT.3 FT.3 FT.1...
  • Page 13 ASSEMBLY INSTRUCTIONS F.8(kc6) F.9(kc6) F.10(kc6) 6pcs 6pcs 2pcs F.8(kc6) F.8(kc6) F.10(kc6) F.9(kc6) F.9(kc6) F.8(kc6) F.9(kc6) FT.1...
  • Page 14 ASSEMBLY INSTRUCTIONS F.12(kc) F.13(kc) F.14(kc812) F.15(kc812) F.17(kc) F.18(kc) 1pcs 1pcs 2pcs 2pcs 1pcs 1pcs F.11(kc) FT.1 F.11(kc) FT.1 40pcs 2pcs F.11(kc) FT.1 F.17(kc) F.15(kc812) F.18(kc) F.14(kc812) FT.1 F.14(kc812) F.15(kc812) F.12(kc) F.13(kc)
  • Page 15 ASSEMBLY INSTRUCTIONS Disassemble the packaging cardboard box, unfold it and lay it on the floor to protect.
  • Page 16 ASSEMBLY INSTRUCTIONS W.1(kc) W.6(kc) 2pcs 2pcs W.1(kc) Inside without wooden surface Wooden surface outside Corner Panel W.6(kc)
  • Page 17 ASSEMBLY INSTRUCTIONS W.1(kc) W.2(kc) W.3(kc) W.4(kc) 1pcs 1pcs 1pcs 1pcs W.1(kc) W.1(kc) Install the guidepiece W.3(kc) W.4(kc) W.2(kc)
  • Page 18 ASSEMBLY INSTRUCTIONS （12*2 Rubber sealing striper） （5*2 Rubber sealing striper） 1pcs 1pcs 12*2mm Rubber sealing strip 5*2mm Rubber sealing strip...
  • Page 19 ASSEMBLY INSTRUCTIONS WIR2.OUT WIR2.IN WIR2.PC W.5(kc) W.3(kc) FT.5 1pcs 1pcs 1pcs 1pcs 1pcs 12pcs FT.5 WIR2.OUT （12PCS） WIR2.OUT WIR2.IN FT.4 （8PCS） WIR2.PC W.5(kc) Note: Keep each panels close to close without gaps. lf the gap is large, the space for installing last panels is insufficient.
  • Page 20 ASSEMBLY INSTRUCTIONS W.4(kc) FT.5 W.5(kc) W.3(kc) WIR2.OUT WIR2.IN WIR2.PC 1pcs 12pcs 1pcs 2pcs 1pcs 1pcs 1pcs W.3(kc) W.3(kc) W.5(kc) W.4(kc) WIR2.OUT FT.5 （12PCS） WIR2.OU WIR2.IN FT.4 （8PCS） WIR2.PC W.5(kc) Note: Keep each panels close to close without gaps. lf the gap is large, the space for installing last panels is insufficient.
  • Page 21 ASSEMBLY INSTRUCTIONS W.6(kc) W.4(kc) Install theguide piece 1pcs 1pcs 2pcs Pay attention to distinguishing w.6(kc) the front and back of the panel. no strip inside strip outside 90° W.6(kc) W.4(kc) Install the guide piece...
  • Page 22 ASSEMBLY INSTRUCTIONS W.2(kc) W.3(kc) W.4(kc) 1pcs 1pcs 2pcs W.3(kc) W.2(kc) W.3(kc) W.4(kc)
  • Page 23 ASSEMBLY INSTRUCTIONS W.1(kc) Install the guide piece 1pcs 2pcs Pay attention to distinguishing the front and back of the panel. no strip inside W.1(kc) strip outside 90° Install the guide W.1(kc) piece to help insert...
  • Page 24 ASSEMBLY INSTRUCTIONS W.2(kc) W.4(kc) W.3(kc) 1pcs 4pcs 4pcs W.4(kc) W.4(kc) W.3(kc) W.3(kc) W.3(kc) W.2(kc) W.4(kc)
  • Page 25 ASSEMBLY INSTRUCTIONS W.6(kc) Install the guide piece 1pcs 2pcs Pay attention to distinguishing the front and back of the panel. no strip inside w.6(kc) strip inside 90° W.6(kc) Install the guide piece to help insert Insert the wall panels to the bottom...
  • Page 26 ASSEMBLY INSTRUCTIONS W.7(kc) 2pcs W.7(kc) W.7(kc)
  • Page 27 ASSEMBLY INSTRUCTIONS W.12(kc) W.8(kc6) W.9(kc6) W.11(kc) 1pcs 1pcs 1pcs 2pcs W.9(kc6) Install the vertical edges of the W.8(kc6) left and right door frames. W.12(kc) W.11(kc) W.11(kc)
  • Page 28 ASSEMBLY INSTRUCTIONS FT.1 90pcs FT.1 The top should be flush Ensure that all connections are in place Then fix adjacent wall panels with screws.
  • Page 29 ASSEMBLY INSTRUCTIONS R.2(kc812) KCRBLC 6pcs 4pcs R.2(kc812) R.2(kc812) KCRBLC R.2(kc812) KCRBLC...
  • Page 30 ASSEMBLY INSTRUCTIONS FT.3 FT.7 A FT.2 FT.7 FR.1(kc8) FR.14(kc) FR.2(kc816) 20pcs 20pcs 16pcs 16pcs 4pcs 4pcs 4pcs Note: FR.2 (kc816) is aligned with the KCRBLC middle hole of KCRBLC and fixed with FT.3 FR.2(kc816) FT.3 FT.7A FT.7 FR.1(kc8) FT.7A FT.7 FT.2 FR.14(kc)
  • Page 31 ASSEMBLY INSTRUCTIONS FT.7 A FT.7 FR.3(kc816) FR.4(kc) FR.5(kc) 24pcs 24pcs 2pcs 4pcs 2pcs FR.3(kc816) FR.4(kc) FT.7A FT.7A FT.7 FR.4(kc) FR.5(kc) FT.7 FR.4(kc) FT.7 FT.7A...
  • Page 32 ASSEMBLY INSTRUCTIONS W.10(kc) FT.6 HD.1(kc) W.14(kc) W.13(kc) W.16(kc) 1pcs 8pcs 2pcs 2pcs 1pcs 1pcs W.10(kc) FT.6 HD.1(kc) W.14(kc) W.13(kc) W.14(kc) W.16(kc)
  • Page 33 ASSEMBLY INSTRUCTIONS FT.2 W.15(kc) W.16(kc) W.14(kc) W.13(kc) VNR2.IN VNR2.OUT 12pcs 2pcs 2pcs 2pcs 2pcs 1pcs 1pcs VNR2.OUT W.15(kc) FT.2 VNR2.IN STICKER W.14(kc) Sticker attached to VNR2.OUT W.13(kc) W.14(kc) W.16(kc)
  • Page 34 ASSEMBLY INSTRUCTIONS R.1(kc) 4pcs R.1(kc) R.1(kc) R.1(kc) R.1(kc) R.1(kc)
  • Page 35 ASSEMBLY INSTRUCTIONS FT.7A FR.6(kc) FT.8 FR.7(kc812) FT.2 2pcs 1pcs 2pcs 2pcs 14pcs FR.6(kc) FT.8 FR.7(kc812) FT.7A The holes should line FR.7(kc812) up with the grooves FT.2 FT.2...
  • Page 36 ASSEMBLY INSTRUCTIONS FR.8(kc812) 2pcs FR.8(kc812)
  • Page 37 ASSEMBLY INSTRUCTIONS FT.7A FR.6(kc) FT.8 FR.7(kc812) FT.2 2pcs 1pcs 2pcs 2pcs 18pcs FR.6(kc) FT.8 FR.7(kc812) FT.7A The holes should line FR.7(kc812) up with the grooves FT.2 FT.2...
  • Page 38 ASSEMBLY INSTRUCTIONS R.4(kc) R.5(kc) FT.2 2pcs 2pcs 6pcs R.5(kc) R.4(kc) FT.2 R.1(kc) R.4(kc) Align the roof panels with the top beam...
  • Page 39 ASSEMBLY INSTRUCTIONS FT.3 R.7(kc) 4pcs 2pcs FT.3 R.7(kc) FT.3...
  • Page 40 ASSEMBLY INSTRUCTIONS FT.3 FT.2 HD.3(kc) HD.2(kc) 4pcs 6pcs 2pcs 1pcs HD.2(kc) FT.2 HD.3(kc) FT.3 FT.2...
  • Page 41 ASSEMBLY INSTRUCTIONS R.6(kc) FT.2 R.5(kc) 2pcs 6pcs 2pcs R.5(kc) R.6(kc) R.5(kc) R.6(kc) R.4(kc) FT.2...
  • Page 42 ASSEMBLY INSTRUCTIONS R.5(kc) R.6(kc) FT.2 2pcs 2pcs 6pcs R.5(kc) R.6(kc) R.5(kc) R.6(kc) R.6(kc) FT.2...
  • Page 43 ASSEMBLY INSTRUCTIONS FT.3 FT.2 HD.3(kc) HD.2(kc) 4pcs 6pcs 2pcs 1pcs HD.2(kc) FT.2 HD.3(kc) FT.3 FT.2...
  • Page 44 ASSEMBLY INSTRUCTIONS R.6(kc) FT.2 R.5(kc) 4pcs 6pcs 4pcs Note:Oppsite is the same way. R.5(kc) R.6(kc) R.5(kc) R.6(kc) R.6(kc) FT.2...
  • Page 45 ASSEMBLY INSTRUCTIONS R.4(kc) R.7(kc) FT.3 2pcs 2pcs 4pcs R.4(kc) R.4(kc) FT.3 R.7(kc) FT.3...
  • Page 46 ASSEMBLY INSTRUCTIONS FT.3 HD.2(kc) HD.3(kc) FT.2 4pcs 1pcs 2pcs 6pcs HD.2(kc) FT.2 HD.3(kc) FT.3 FT.2...
  • Page 47 ASSEMBLY INSTRUCTIONS FT.2 18pcs Note: Lock the screws after the roof sheet is flush with the U-shaped top. FT.2 FT.2...
  • Page 48 ASSEMBLY INSTRUCTIONS HD.4(kc) HD.5(kc) FT.2 3pcs 3pcs 12pcs FT.9 HD.5(kc) FT.7A The roof can be HD.4(kc) raised by turning the nut counterclockwise FT.10 FT.2 FT.2 Note:lift the HD.4(kc) and then lock the screws. If the rod is too tight, turn the nut to the center.
  • Page 49 ASSEMBLY INSTRUCTIONS R.8(kc812) KCRRC FT.2 Rubber sealing strip 2pcs 1pcs 8pcs 4pcs Fold inwards Rubber sealing strip (X4) R.8(kc812) R.8(kc812) KCRRC FT.2...
  • Page 50 ASSEMBLY INSTRUCTIONS KCRRH FT.3 FT.2 2pcs 10pcs 12pcs The steps and tips for screw locking on skylight ridge : 1.Go from the front side(door side) to the back side. 2.Pressing down the upside of the skylight ridge ,then lock the screws inside. 3.In the middle part,use the pliers to pull down the skylight ridge,then lock the screws.
  • Page 51 ASSEMBLY INSTRUCTIONS kcRBC.L kcRBC.R FT.2 2pcs 2pcs 8pcs KCRBC.L 顶 KCRBC.R 板 FT.2(8) 安 装...
  • Page 52 ASSEMBLY INSTRUCTIONS FR.10(kc) FR.9(kc) FR.12(kc) FT.2 FR.13(kc) FR.14(kc) FT.7 FT.7A 2pcs 2pcs 1pcs 1pcs 2pcs 8pcs 8pcs 8pcs FR.12(kc) FT.7A FT.3 FR.13(kc) 4pcs FT.7 FT.3 FR.10(kc) FT.7A FT.7 FR.10(kc) FR.10(kc) FT.2 FR.9(kc) FR.9(kc) FT.7 FT.7A FR.14(kc)
  • Page 53 ASSEMBLY INSTRUCTIONS FR.1(kc8) FR.10(kc) FR.9(kc) FR.11(kc) FT.7A FT.2 FT.7 2pcs 1pcs 1pcs 2pcs 30pcs 4pcs 4pcs FT.2（2） FT.2 FR.9(kc) FR.10(kc) FT.2 FT.2 FR.11(kc) FT.7A FT.7 FR.1(kc) FR.1(kc8) FT.2...
  • Page 54 ASSEMBLY INSTRUCTIONS FT.5 D.1(kc) D.2(kc) D.3(kc) D.4(kc) FT.6 WIR2.PC WIR2.IN WIR2.OUT 1pcs 12pcs 1pcs 1pcs 1pcs 1pcs 1pcs 2pcs 14pcs LEFT DOOR FT.6 D.4(kc) D.2(kc) D.1(kc) D.3(kc) 【Door Inside】 D.4(kc) FT.5 WIR2.OUT （12PCS） WIR2.OUT WIR2.IN FT.4 （8PCS） WIR2.PC D.1(kc)
  • Page 55 ASSEMBLY INSTRUCTIONS HD.8(kc) DH.5 FT.2 FT.3 FT.6 2pcs 1pcs 1pcs 2pcs 4pcs 4pcs DH.5 FT.3(4 ) FT.6(2 ) FT.2(2) HD.8(kc)
  • Page 56 ASSEMBLY INSTRUCTIONS HD.9(kc) FT.11 HD.7(kc) FT.6 1pcs 2pcs 2pcs 4pcs FT.11 HD.7(kc) FT.6(4) HD.9(kc)
  • Page 57 ASSEMBLY INSTRUCTIONS FT.5 D.5(kc) FT.6 WIR2.PC D.3(kc) D.4(kc) WIR2.IN WIR2.OUT 1pcs 12pcs 1pcs 1pcs 1pcs 14pcs 2pcs 2pcs RIGHT DOOR FT.6 D.4(kc) D.3(kc) D.5(kc) D.3(kc) D.4(kc) FT.5 WIR2.OUT （12PCS） WIR2.OUT WIR2.IN FT.4 （8PCS） WIR2.PC D.5(kc)
  • Page 58 ASSEMBLY INSTRUCTIONS HD.7(kc) DH.5 FT.6 HD.10(kc) FT.3 FT.2 2pcs 1pcs 1pcs 6pcs 1pcs 4pcs 2pcs DH.5 FT.2(2) FT.3(4) 右 门 板 组 装 FT.6 FT.6 HD.7(kc) HD.10(kc)
  • Page 59 ASSEMBLY INSTRUCTIONS FT.6 8pcs 门 板 FT.6(4) 安 装 FT.6(4)
  • Page 60 ASSEMBLY INSTRUCTIONS FT.1 F.19(kc) Wedge shaped cushion block 2pcs 1pcs 2pcs FT.1(2) F.19(kc) 磁 吸 开 关 安 装 Wedge shaped cushion block 2pcs 【When the door is not closed smoothly, it needs to be leveled or adjust by tighten or loosen the hinge.】...
  • Page 61 ASSEMBLY INSTRUCTIONS FT.12 FT.2 HD.6(kc) 8pcs 4pcs 2pcs FT.12 (x6) FT.2 (x4) HD.6(kc) (X2) FT.12 (x2)