Download Print this page
Morris 71769A Instructions

Morris 71769A Instructions

Remote control for dimmable motion sensors

Advertisement

Quick Links

Morris CAT#: 71769A
Remote Control for Dimmable
Motion Sensors
ON/OFF
1. "ON/OFF" key only functions as a switch of the light.
2. If press this button to turn off the lamp before it's short-circuited, the lamp will remain off after power-on again.
Auto Mode
Press "Auto Mode" button, the sensor starts to work and all settings remain the same before the light gets switched on/off.
Reset
1、Press "Reset" button, change brightness to max level.
2、Press "Reset" button, products with DIP switch will be controlled by DIP switches; otherwise all the setting will be just
initial, that is 100% detection range,hold time 5S, no stand-by time and daylight threshold disabled.
Flick after press any button
Flick only after press "Apply" button
+/-
1. To adjust brightness 10-100% in on/off mode.
2. To adjust highest brightenss 60-100% in sensor mode.
Start
Press "Start" to customize scene, users can change detection range, daylight threshold, holdtime, standby dimming level and
standby period.
Memory
1. Press "Memory" to save all the settings.
2. The settings remained as the last time if not get resetted values.
Apply
1. Press "Apply" to deliver the saved setting.
2. Press "Apply" without "memory"will make all the setting one-time operation.
3. Settings should be done within 30S, otherwise it exits memory mode.
Note: "0s" means no standby period; "+∞" means unlimited standby period.
Note: Disable means light will be turned on once sensor detects movement, regardless of the ambient lux.
Test (2s)
The button "Test (2s)" is for testing purpose after commissioning.Pressing this button, the sensor goes to test mode
( hold time is only 2s )
Detection area (Press to define detection area 100%/75%/50%/25%.)
Hold time (Press to define holdtime 5s/30s/1min/3min /5min/10min/20min/30min .)
Stand-by dimming level (Press to define stand-by dimming level 10%/20%/30%/50%.)
Stand-by period (Press to define stand-by period 0s/10s/30s/1min/5min/10min/30min/+∞.)
Daylight threshold (Press to define daylight level 2Lux/10Lux/30Lux/50Lux/80Lux/120Lux/Disable.)

Advertisement

loading
Need help?

Need help?

Do you have a question about the 71769A and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Morris 71769A

  • Page 1 Morris CAT#: 71769A Remote Control for Dimmable Motion Sensors ON/OFF 1. "ON/OFF" key only functions as a switch of the light. 2. If press this button to turn off the lamp before it's short-circuited, the lamp will remain off after power-on again.
  • Page 2 Instructions: Memory & Apply Mode 1. Press "ON/OFF button" to turn on the light or off. 2. To reset the parameters, Please follow the steps as below: Step 1 - Press ON, to turn on the light if it was off at the start. Step 2 - Press "Start"...