Download Print this page

UWANT D100 Instruction Manual

Cordless wet dry vacuum cleaner

Advertisement

Quick Links

D100 Cordless Wet Dry Vacuum Cleaner
Instruction Manual
Please read this Manual carefully before use and keep it properly.

Advertisement

loading
Need help?

Need help?

Do you have a question about the D100 and is the answer not in the manual?

Questions and answers

Summary of Contents for UWANT D100

  • Page 1 D100 Cordless Wet Dry Vacuum Cleaner Instruction Manual Please read this Manual carefully before use and keep it properly.
  • Page 2 一 I Precautions Before using this device, please read all the contents of this manual carefully, install the device according to the operating steps in this manual, and keep the manual properly. Any operation inconsistent with the instructions in this manual may result in product damage or serious personal injury.
  • Page 3 • The battery installed in the appliance contains materials that are harmful to the environment. When discarding the appliance, the battery must be removed from the appliance; • Before taking out the battery, the appliance must be powered off; • Please dispose of waste batteries safely and properly, and do not throw them into fire, water or soil;...
  • Page 4 Smart base Main unit Clean tray ② Scrubber HEPA Roller brush Wastewater tank component Cleaning Cleaning assembly upper cover + solid-liquid solution tool separation + deodorizing stick ③ Other components Disassembly and Assembly Handle installation instructions • Insert the end of the handle into the port of the ①...
  • Page 5 Disassembly and assembly instructions for wastewater tank assembly • To remove the wastewater tank assembly, hold the ① ② scrubber body with one hand, press the release button of the wastewater tank assembly with the other hand, and pull it out as shown in the figure to take out the wastewater tank assembly;...
  • Page 6 Instructions for Use Preparation work • Before use, please check whether your floor scrubber has power. If the power is insufficient, please charge it in time (refer to the charging guide for details) and use after it is fully charged; •...
  • Page 7 Pouring wastewater from wastewater tank assembly ① ② • Press the unlock button of the wastewater tank and remove the wastewater tank; • Hold the wastewater tank with one hand and pull out the drain basket assembly upward with the other hand;...
  • Page 8 3 months to avoid battery damage. Indicator lights Screen display: power display, cleaning mode, sterilization Battery mode, fault prompt Sterilization Smart Turbo The default mode is smart mode when the device is turned on, and the smart mode light is on Smart When work-...
  • Page 9 Maintenance Clean the body • Before cleaning, please make sure the device is turned o ; Mode • Please scrub the device body with water or button neutral detergent. Be sure to wring out the On/O cleaning cloth before scrubbing. Do not let water button ow into the inside of the device.
  • Page 10 Self-cleaning ① ② • Please put the device back to the smart base after using it; • Press the self-cleaning button, and the device will Self-cleaning button start self-cleaning; after the roller brush cleaning is completed, the device enters drying mode. •...
  • Page 11 Speci cations Rated voltage 22.2V Cordless Wet Dry Product name Vacuum Cleaner Rated power 230W Model D100 Charging voltage 26.5V Rated power 180W Rated input Product name Smart base 220-240V 50/60Hz Rated output 26.5V 0.6A Compliant national standards: GB 4706.1-2005; GB 4706.7-2014; GB 4343.1-2018; GB 17625.1-2022 The technical speci cations are subject to change without prior notice.
  • Page 12 Sudden changes Finish at least 3 complete cycles of charge in power when Battery pack is abnormal and discharge the product is being discharged Self-cleaning The battery is too low Charge the battery before using unavailable No alarm when The wastewater detection electrode Clean the electrode needle of the wastewater tank needle is dirty...
  • Page 13 Motor components Water pump components components Battery This form is prepared in accordance with the provisions of SJ/11364: O: Indicates that the content of hazardous substances in all homogeneous materials of this part is below the limit requirements speci ed in GB/T26572. X: Indicates that the content of the hazardous substance in at least one homogeneous material of this part exceeds the limit requirements speci ed in GB/T26572.