Subscribe to Our Youtube Channel
Related Manuals for Hensel Turntable 360
Summary of Contents for Hensel Turntable 360
- Page 1 Turntable 360° User Manual Translation of the original German user manual Doc.-No. 900.0578.00 Stand: 09/2024...
- Page 2 Contents Information about this manual and about the manufacturer ....4 Keeping this manual on hand ..............4 Copyright ....................4 Manufacturer’s address ................4 Safety ..................... 5 Intended use .................... 5 Fundamental safety information ............. 5 Prevention of equipment damage and malfunctions ......6 Design features of warning notices ............
- Page 3 Changing the password ................ 26 Controlling the device via the web browser .......... 28 User interface ..................30 Controlling the device manually ............32 Controlling the device automatically ............. 32 Restoring factory settings ..............35 Transporting and storing the device ............36 Caring for and cleaning the device ............
- Page 4 Information about this manual and about the manufacturer This manual can assist you with safe use of the “Turntable 360°”. The “Turntable 360°” is called “device” for short in the following text. Keeping this manual on hand This manual is always included with the device.
- Page 5 Safety Safety The device has been built according to state-of-the-art technology and recognized safety-related regulations. During work with and on the device, however, residual risk remains, which could present a danger to life and limb. For this reason, the following safety information is to be observed and followed.
- Page 6 Safety Check the device annually for operating safety (see the maintenance schedule on page 37). Clean the outside of the device regularly with a dry cloth. Have damaged cables and the device replaced immediately by the authorized Customer Service only. Avoid crushing The device moves during operation.
- Page 7 Safety Design features of warning notices CAUTION Notices with the word CAUTION warn about a situation that could lead to light or medium-scale injuries. Design features of equipment or property damage information IMPORTANT! This information warns against a situation that can lead to equipment or property damage.
- Page 8 Description Description Scope of delivery Device Mains cable Power supply Sync cord (suitable for the specified camera)
- Page 9 Description Overview of controls Turntable plate Main ON/OFF switch Feet Mains socket Sync socket Ethernet socket LED display (ON) lights up green when device in operation Button for restoring the factory settings...
- Page 10 Description Task and function The device is a turntable and is used to create professional 360°-product shots. The product is positioned on the turntable plate. The turntable plate rotates to predetermined positions, triggers the camera, and continues to rotate. This allows a maximum of 360 shots to be taken from all sides of the product.
- Page 11 Description Technical data Device type Turntable 360° Article number 194940104 Maximum load 120 kg (10 kg suspended) Drive Stepper motor with reduction gear Control LAN and WLAN Operating system Web browser, compatible with Windows, OS, Android and iOS Rotations From 20 sec. (max. 16 photos), 30 sec. (max. 24 photos), 40 sec.
- Page 12 Description Device type Turntable 360° Turntable plate Standard Ø 40 cm Special version Ø 70 cm Turntable plate weight 0.5 kg Operating time, uninterrupted Max. 24 hours Housing and turntable plate Metal material We reserve the right to make technical changes.
- Page 13 Unpacking the device and checking the scope of delivery Unpacking the device and checking the scope of delivery Remove the device from the packaging. Keep the original packaging in case you need to return the product to Customer Service. ...
- Page 14 Commissioning the device Commissioning the device Setting up the device The installation surface must: • be stable, • be larger than the device, • be able to support the weight of the device. Information on weights and dimensions can be found in the technical data (see page 11).
- Page 15 Commissioning the device Cables are available for most current DSLR and DSLM cameras. When using compact flash units, these must be synchronized directly with the camera using a cable or radio transmitter. Follow the camera's user manual. Switching on the device ...
- Page 16 Configuring the device Configuring the device Establishing a connection with the control unit via WLAN Depending on the operating system used or the language version, the designations displayed in the app user interface may differ from those in this manual. ...
- Page 17 Configuring the device The connection to the WLAN is established and displayed as follows: Connecting the device to a Mac via LAN The device is connected to a Mac via WLAN (see page 16). Type the IP address “192.168.4.1” into the address bar of a web browser.
- Page 18 Configuring the device The login window is displayed. Enter the access data as follows: • User name: admin • Password: pass Click on “Anmelden” (log in). The following preconfigured settings are already stored for the connection via Ethernet: •...
- Page 19 Configuring the device We recommend that you retain these settings if you intend to connect to the device as a “standalone solution”. If you have connection problems, contact our Customer Service (see page 45). In the “Mode” selection window, set the tab from “DHCP” to “Static IP”. ...
- Page 20 Configuring the device The network connection can now be configured by the Mac. Network connection for newer Apple operating systems, such as Sonoma 14.3, is described in the following. Select “Netzwerk” (network) under “Systemeinstellungen” (system settings). Select the network connection to the device. This may be displayed with different names depending on the adapter or connection used.
- Page 21 Configuring the device Call up “Details” under the active network connection. Click on “OK”.
- Page 22 Configuring the device Enter the following parameters under “TCP/IP”: Select “manuell” (manual) under “IPv4 konfigurieren” (Configure IPv4). Under “IP-Adresse” (IP address) enter: 192.168.18.2. This is the fixed network address assigned by the Mac. Under “Teilnetzmaske” (subnet mask) enter: 255.255.255.0. ...
- Page 23 Configuring the device Type the IP address “192.168.18.201” into the address bar of a web browser. Confirm with “Enter”. Select “Automatic Control” for web control of the device. To control the device via the web browser, proceed as described from page 28 .
- Page 24 Configuring the device Establishing a static network connection for Apple devices (IOS) Ensure the device is connected and switched on. On the app, select “Einstellungen” (settings) for the control unit. Click on the WLAN for the XYIMAGER_XXXXXX network. ...
- Page 25 Configuring the device Establishing a static network connection for Android devices Ensure the device is connected and switched on. On the app, select “Einstellungen” (settings) for the control unit. Select connections. Select XYIMAGER_XXXXXX on the WLAN network. ...
- Page 26 Changing the password Changing the password To change the password, click on “Automatic Control” in the “Control Menu”. The user interface is displayed. Click on the “Change password” button. The login window is displayed. Enter the access data as follows: User name: admin Password: pass ...
- Page 27 Changing the password The following window ist displayed. Enter a new password under “WiFi password”. Click on “Save and Connect via WiFi” to save the entry.
- Page 28 Controlling the device via the web browser Controlling the device via the web browser Open the web browser of the control unit. We recommend using Firefox. Type the IP address “192.168.4.1” into the address bar. Once the connection has been established, click on “Automatic Control” in the “Control Menu”.
- Page 29 Controlling the device via the web browser When starting up for the first time, it may take a few seconds for the connection to be established and for all buttons to be displayed correctly. The process should be completed after a maximum of ten seconds. ...
- Page 30 Controlling the device via the web browser User interface...
- Page 31 Controlling the device via the web browser Displays the current position of the turntable plate. Displays the last time the camera was triggered. Button for manually turning the turntable plate to the right. For setting the start angle. ...
- Page 32 Controlling the device via the web browser Controlling the device manually CAUTION The turntable plate of the device moves during operation. Products that are being photographed can topple and cause crushing injuries. Do not touch the turntable plate during operation. ...
- Page 33 Controlling the device via the web browser Setting the rotation speed, start and end angle and number of photos To set the rotation speed, enter the desired value in the SPEED field (1) Set the start angle. To do this, enter the value in field (2). ...
- Page 34 Controlling the device via the web browser Activating and deactivating Quick Shot To activate the QUICK SHOT function, click on the button (1). The photos are triggered without stopping the device. To deactivate the QUICK SHOT function, click on the button (1) again. When the QUICK SHOT function is deactivated, the arrow line of the button is hatched.
- Page 35 Restoring factory settings Restoring factory settings Press the button (1) on the device for 15 seconds. Switch the device off. Switch the device back on. The factory settings are restored.
- Page 36 Transporting and storing the device Transporting and storing the device Transport the device in its original packaging. Store the device in places that are not exposed to heat, moisture, frost or cold. Cover the device with suitable dust protection.
- Page 37 Caring for and cleaning the device Caring for and cleaning the device To guarantee electrical safety, the device must be cleaned regularly. Clean the outside of the device regularly with a dry cloth. Regular inspection National safety regulations – e.g. the Industrial Safety Act (BetrSichV) and DGUV Regulation 3 (formerly BGV A3) in Germany –...
- Page 38 Replacing the turntable plate Replacing the turntable plate IMPORTANT! The device can be damaged if external products are used. Only use original spare parts and accessories from the manufacturer. Switch the device off. Remove the turntable plate (Ø 40 cm). ...
- Page 39 Taking the device out of operation Taking the device out of operation Switch off the device at the main switch (1). Remove the product from the turntable plate. Disconnect the mains cable (2) from the device. Disconnect the sync cord (3) from the device.
- Page 40 Disposing of the device and packaging Disposing of the device and packaging In Germany Dispose of the device packaging separately. Use the local facilities for collecting paper, cardboard and lightweight packaging. Dispose of the device together with the accessories separately from household waste.
- Page 41 EU Declaration of Conformity EU Declaration of Conformity Hensel-Visit GmbH & Co. KG hereby declares that device type “Turntable 360 °” complies with Directive 2014/53/EU. The complete text of the EU Declaration of Conformity is available under the following URL:...
- Page 42 Accessories Accessories Designation Article number Turntable plate Ø 70 cm 194940020...
- Page 43 Warranty provisions Warranty provisions In Germany The warranty provisions can be found in our general terms and conditions for business on our website: www.hensel.de Outside of Germany The warranty provisions of the dealer from which you have purchased the device apply.
- Page 44 Limitation of liability Limitation of liability We are not liable for equipment or property damage, or personal injury arising from improper use of the device that is inconsistent with the information provided in the user manual. We are also not liable for consequential damages (such as production or income losses, etc.) that may be caused by a defect in or malfunction of our device.
- Page 45 As soon as you discover damage to the device, proceed as follows: Send the device in its original packaging with a precise description of the defect to the following address for repair: HENSEL-VISIT GmbH & Co. KG Customer Service Department Robert-Bunsen-Str. 3 D-97076 Würzburg...
Need help?
Do you have a question about the Turntable 360 and is the answer not in the manual?
Questions and answers