Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Sytech SY.GHBF400
- Page 1 B L U E F L A ME G A S H E A T E R S Y . G H B F 4 0 0...
- Page 2 • ALWAYS check for damage before using the heater. Check for broken parts or anything that may affect its function. Any damage should be properly repaired, or part replaced. If in doubt, DO NOT use. Consult the technical department center of Sytech.
- Page 3 • Do not use the appliance if any of its parts have been in contact with water or high humidity. Contact the technical department of Sytech. • ALWAYS position the gas heater always observing the minimum safety distances from objects and walls: 50 cm on its sides;...
- Page 4 • Young children should be supervised to ensure that they do not play with the appliance. • Do not repair the appliance by yourself in case of any malfunction. Contact Sytech technical service department for a proper repair. • The volume of the room should be greater than or equal to 15 m .
- Page 5 places on shelves, or height. • Be careful with the pilot while it is running. It must burn constantly. If it flashes or a yellow flame is seen, you should immediately off the appliance and inspect it before operating again. •...
- Page 6 PARTS OF THE BLUE FLAME GAS HEATER SETTING UP THE UNIT FOR FIRST TIME USE • Assemble the different parts of the unit according to the below illustrations. • Mount the individual panels with the screws supplied. (Two tools are also supplied for assembly and disassembly functions).
- Page 7 MOUNTING THE GAS HEATER SUPPLIED ACCESSORIES: • UPPER PANEL & BACK PANEL • 5 x WHEELS • 8 x SCREWS • INSTALLATION TOOLS (SCREWDRIVER AND WRENCH) 2. Secure the left and right-side panels with 2 1.Follow the arrows to open ( 1 ) ( 2 ) ( 3 ) ( 4 ) butterfly screws，Secure the bottom plate with 4 screws.
- Page 8 IMPORTANT LEAKAGE TEST: • The leak test should be carried out in a well-ventilated area, free from any flames or other sources of ignition. • Turn off any existing flames in the vicinity, as well as any electrical appliances. • Do not smoke during the process. •...
- Page 9 GAS HEATER PLACEMENT • This heater is designed to be placed on the floor and away from walls. When using the heater, always point it in the direction of the centre of the room. • Clean all combustible materials from the vicinity of the heater. •...
- Page 10 ¡ATTENTION! The following operations must be carried out away from a flammable source. Placement of the gas cylinder Please use a butane gas cylinder. Remove the back part of the appliance. Place the gas cylinder inside, making sure that the hose is not constricted or pressed by the cylinder. Reattach the back part of the appliance.
- Page 11 - Carefully remove the gas cylinder from its housing, taking care not to damage the flexible tube. - Disassemble the regulator by pulling the ring (5) vertically as indicated in Fig. 4. - Check that the connection of the regulator is in good condition. - Remove the gas cylinder and place it in a safe location.
- Page 12 CLEANING AND MAINTENANCE • In the event of any anomaly or if you require spare parts, please contact our Technical Service. Periodic maintenance should only be carried out by an authorised technician. • We recommend having the appliance serviced by an authorised technician every 2 years. •...
- Page 13 Tel: 91 8865320 Fax: 91 8864285 NIF: B-83254763 Manufacturing country: China Description: Portable Gas Heater Sytech® SY-GHBF400 complies with the following directives: We hereby declare that this product(s) complies with the following directive(s): 2016/426 Appliances Burning Gaseous Fuels. 2009/125/EC Eco-Design Directive Annex (EU 2015/1188-2015/1186)
Need help?
Do you have a question about the SY.GHBF400 and is the answer not in the manual?
Questions and answers