Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
3000 PSI
1.1 GPM ELECTRIC
PRESSURE WASHER
email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2024 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
23142E-B
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
24b
70138
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Bauer 23142E-B
Summary of Contents for Bauer 23142E-B
- Page 1 (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. 23142E-B 3000 PSI 1.1 GPM ELECTRIC PRESSURE WASHER Visit our website at: http://www.harborfreight.com...
- Page 2 table of contents Safety ............3 Maintenance ..........13 Specifications ..........6 Parts List and Assembly Diagram....15 Setup – Before Use: ........7 Warranty ............ 20 Operation ............ 9 WarninG SyMBOLS anD DeFinitiOnS This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
- Page 3 iMpOrtant SaFety inStructiOnS WarninG - When using this product basic precautions should always be followed, including the following: Safety Warnings 1. Read all the instructions before using the product. 9. This product is provided with a ground fault circuit interrupter (GFCI) built into the power 2.
- Page 4 Operating precautions 1. Disconnect the plug from the power source 10. Do not feed already-pressurized water (such as that before making any adjustments, changing from another pressure washer) into this washer. accessories, or storing pressure washers. Such 11. People with pacemakers should consult their preventive safety measures reduce the risk of physician(s) before use.
- Page 5 Vibration Hazard: This tool vibrates during use. Repeated or long-term exposure to vibration may cause temporary or permanent physical injury, particularly to the hands, arms and shoulders. To reduce the risk of vibration-related injury: 1. Anyone using vibrating tools regularly or for an 2.
- Page 6 Symbology Read the manual before Volts Alternating Current set-up and/or use. Amperes WARNING marking concerning Risk of Fire. Do not cover ventilation ducts. Keep flammable objects away. On position WARNING marking concerning Risk of Electric Shock. Off position Properly connect power cord to appropriate outlet.
- Page 7 Setup – Before use: read the entire iMpOrtant SaFety inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn: turn the power Switch of the tool off, unplug the tool from its electrical outlet, shut off the water supply and safely discharge all residual water pressure from the unit before assembling or making any adjustments to the tool.
- Page 8 assembly note: For additional information regarding the parts listed in the following pages, refer to Parts List and Assembly Diagram on page 15. Remove shipping caps from Water Inlet/Outlet. attach Handle 1. Hold the Spring Button near each end of the Handle in while inserting the ends into the Lower Frame.
- Page 9 Operating instructions read the entire iMpOrtant SaFety inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Work piece and Work area Set up 1. Designate a work area that is clean and well-lit. 3.
- Page 10 tool Set up tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn: turn the power Switch off, unplug it from its electrical outlet, and relieve all pressure before making adjustments or installing accessories. 1. MAKE SURE THE WATER INLET STRAINER 4. Connect water supply hose to Water Inlet on ON SPRAY GUN AND WAND ARE FREE front of Pressure Washer.
- Page 11 General Operating instructions tO preVent eLectric SHOcK anD DeatH: test Ground Fault circuit interrupter (GFci) before each use. the GFci does not protect against electrical shock due to contact with both circuit conductors or a fault in any wiring supplying in this device. Do not alter or disable the GFci.
- Page 12 cleaning Windows 8. When finished: • Release Trigger, then Lock Trigger Safety Lock. a. Inspect caulking and/or glazing. Inspect trim. DO nOt preSSure WaSH WinDOWS iF • Turn off Power Switch. cauLKinG/GLaZinG/triM iS nOt intact. • Turn off water supply. b.
- Page 13 user-Maintenance instructions tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn: turn the power Switch of the tool off, unplug the tool from its electrical outlet, shut off the water supply and safely discharge all residual water pressure from the unit before performing any inspection, maintenance, or cleaning procedures. tO preVent SeriOuS inJury FrOM tOOL FaiLure: Do not use damaged equipment.
- Page 14 troubleshooting problem possible causes Likely Solutions Pressure Washer 1. Cord not connected. 1. Check that cord is plugged in. will not start 2. No power at outlet. 2. Check power at outlet. If outlet is unpowered, turn off tool and check circuit breaker. If breaker is tripped, make sure circuit is right capacity for tool and circuit has no other loads.
- Page 15 parts List and assembly Diagram pLeaSe reaD tHe FOLLOWinG careFuLLy THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
- Page 16 parts List - Washer part Description part Description Upper Housing Panel Black Elastic Band Upper Housing Clip Lower Housing Handle Outlet Wire Strain Plate Foam Rubber Sleeve Outlet Strain Plate Grommet Wand Mount Power Switch Power Cord Switch Box Cover GFCI Plug Motor Upper Housing Power Cord Hanger...
- Page 17 assembly Diagram - Washer Item 70138 For technical questions, please call 1-888-866-5797. Page 17...
- Page 18 parts List - Motor part Description part Description Bearing Seat O-Ring Screw/Spring Gasket/Large Gasket Hex Set Screw Thrust Ball Bearing Hex Cap Screw & Spring Gasket Axial Circlip Suction Spring Plunger Cup Stainless Steel Ball Plunger O-Ring Plunger Spring O-Ring O-Ring Suction Connector Pump Body...
- Page 19 assembly Diagram - Motor Item 70138 For technical questions, please call 1-888-866-5797. Page 19...
- Page 20 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the 23142E-B and is the answer not in the manual?
Questions and answers
Where am I able to order the microswitch housing a30 and a32 for the baur model 23142E‑B pressure washer