Mixing Speeds (RPM) for Different Micro-plates Depending on
Filling Volume/ Well (%)
Filling Volume in % 96 Standard Well 96 Deep Well
50 %
1000 - 1200 RPM 800 - 1200 RPM 1200 RPM
75 %
800 - 1000 RPM
600 - 1000 RPM 900 - 1100 RPM
10.
CLEANING AND MAINTENANCE
Cleaning should be done using a Damp cloth.
Ÿ
Unplug the unit from its power source before any cleanup process.
Ÿ
Ÿ
In case of any spillage allow the device to be steady.
Remove a contaminant by cleaning the unit frequently
Ÿ
Store in a dry place after packing
Ÿ
Note: Do not attempt to service or repair a product under warranty
before consulting your manufacturer or distributor. After warranty
period even such consultation are advised
11.
SAFETY PRECAUTION
Read all safety & usage information provided in this manual
carefully before using the device.
Ÿ
Do not lift the shaker by holding the micro-plate or shaking
platform.
Ÿ
Always operate the unit on a leveled and stable surface to avoid
any kind of accident.
Ÿ
The shaker should be used for specific applications only.
Do not use shaker in the hazardous environment or with
Ÿ
hazardous material for which the unit is not designed.
Do not operate the unit if it shows signs of electrical or mechanical
Ÿ
damage. If any such damage is found, contact the supplier.
Care should be taken on the basis of sample used for mixing.
Ÿ
12.
WARRANTY STATEMENT
This product is warranted to be free from defects in material and
workmanship. Your product will be duly repaired upon prompt
notification in compliance with the following conditions:
This warranty is valid only if the product is used for its intended
purpose and within the guidelines specified in this instruction manual.
This warranty does not cover damage caused by accident, neglect,
misuse, improper service, natural forces or other causes not arising
from defects in original material or workmanship. This warranty does
not cover any incidental or consequential damages, commercial loss
or any other damages from the use of this product.
The warranty is invalidated by any non-factory modification, which will
immediately terminate all liabilities on us for the products or damages
caused by its use. The buyer and its customer shall be responsible for
the product or use of products as well as any supervision required for
Safety. If requested the products must be returned to the distributor in
well packed and insured manner and all shipping charges must be
paid.
4
Some states do not allow limitation on the length of implied
warranties or the exclusion or limitation of incidental or consequential
damages. This warranty gives you specific legal rights. This warranty is
384 Standard Well
given expressly in lieu of all other warranties, expressed or implied.
Products received without proper authorization will not be
entertained. All items returned for service should be sent postage
prepaid in the original packaging or other suitable carton, padded to
avoid damage. We will not be responsible for damage incurred by
improper packaging.
This warranty is valid only if the warranty is registered with the supplier
within 30 days from the date of purchase.
For details regarding the warranty period, please refer to the warranty
card provided with the product.
For your reference, make a note of the serial number, date of purchase and supplier here.
Serial No.
Supplier
13.
PRODUCT DISPOSAL
In case the product is to be disposed off, the relevant legal regulations
are to be observed.
The disposal of electrical devices is regulated within the European
Community by national regulations based on EU Directive
2012/19/EU on waste electrical and electronic equipment (WEEE).
According to these regulations, any devices supplied after 13.06.05 in
the business to business sphere, to which this product is assigned, may
no longer be disposed off in municipal or domestic waste. They are
marked with the following symbol to indicate this.
As disposal regulations within the EU may vary from country to
country, please contact your supplier if necessary.
Accumax Lab Devices Private Limited
Plot No. 15, 16 & 32 GIDC Electronic Park SEZ, Sector 26, Gandhinagar, Gujarat, India - 382026.
Purchase Date
Website: www.accumaxlab.com
0252-00-0000-02-003-R3
iSHAK QUATTRO NXT
PRODUCT USER MANUAL
Need help?
Do you have a question about the iSHAK QUATTRO NXT and is the answer not in the manual?
Questions and answers