Whirlpool WHSD18F023C1 Quick Manual

Quick guide
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT
In order to receive a more complete assistance, please
register your product on
FIRST TIME USE
Wait at least two hours, after the installation, before connecting
the appliance to the power supply. Connect the appliance to the
power supply it starts the operation automatically. The ideal storage
temperatures for the food are preset in the factory.
CONTROL PANEL
ON/STAND-BY
To put the product in Stand-by, press and hold the On/ Stand
By button for 3 seconds. All the indicators turn off except On/Standby
indicator. In Stand-by mode the light in the refrigerator compartment
does not turn on.
Press again to reactivate the appliance.
TEMPERATURE DISPLAY
The display shows the temperature of the freezer compartment
(between -16°C and -24°C).
To avoid an increase of food waste, refer to recommended setting and
Storage Time in User manual online.
TURNING OFF THE SOUND ALARM
To turn off the sound alarm, briefly press the
FREEZER COMPARTMENT TEMPERATURE
To adjust the Freezer Temperature, press the Freezer
Freezer Temperature can be adjusted between -16°C and -24°C, as
shown by the Freezer Temperature display.
Recommended setting:
Freezer compartment: -18°C
FAST FREEZE
The use of this function is recommended for the optimum
freezing of fresh food.
24 hours before freezing fresh food, press the Fast Freeze button
to activate the function. When activated, the Fast Freeze indicator turns
on. After 24 hours place the fresh food to be frozen in the 3rd shelf
from the top.
Note: The function is automatically disabled after 48 hours, or can be
manually disabled by pressing Fast Freeze button
BLACK OUT ALARM
This alarm is triggered in the event of a prolonged power
outage that has caused the temperature inside the freezer
compartment to rise. The red indicator light flashes
signal is triggered, which will remain active until the door is closed.
The freezer compartment temperature indicators may flash. To turn
the sound signal off, press the "Turn off alarm" button
freezer compartment has not yet reached the temperature for the
optimal preservation of the food items, the temperature alarm may be
triggered (see temperature alarm). Check the food before consuming it.
* Available only on certain models
www . whirlpool . eu/ register
1. 2.
9. 5.
8. 7. 6.
button.
button. The
again.
and an acoustic
. If the
Before using the appliance carefully read the Safety
Instruction.
After turning the appliance on, you must wait for 4-6 hours for the
correct storage temperature to be reached for a normally filled
appliance. Position the antibacterial anti-odour filter in the fan as
demonstrated in the filter packaging (if available). If the audible signal
sounds, it means that the temperature alarm has intervened: press the
button to switch off the acoustic alarms.
3.
4.
FREEZE CONTROL INDICATOR
This is an advanced technology that reduces temperature
fluctuations in the product Freezer burns are reduced and food
preserves its original quality and color.
This function is automatically engaged when the freezer temperature
set-point is between -22°C and -24°C.
If the function is engaged and the user modifies the freezer
temperature out of the working range, the function is automatically
switched off.
PARTY MODE
Press the Party Mode button
function. The Party Mode icon turns ON Use this function to chill drinks
inside the product.
Important: do not leave the bottle inside the product longer than the
function is active (30 minutes).
The function can be manually disabled by pressing again the Party
Mode button before the acoustical alarm turns ON.
After 30 min since it has been engaged, the acoustical alarm is
activated, the party mode icon and the alarm indicator blink Press the
Stop Alarm button
Temperature Display
1.
Door open indicator
2.
3. Black out alarm indicator
Turning off the sound alarm
4.
Party mode indicator
5.
Freezer control indicator
6.
Temperature button
7.
8. Fast freeze
On/stand-by
9.
to activate the Party Mode
to exit party mode
EN