Page 4
This Manual is about how to setup TBS6032 in Kylone system. TBS6032 is compatible with Kylone system, which will be also very easy to support different sources. For example, DVB source which comes from DVBS/S2/S2X, DVBC, DVBT/T2, ISDB-T, ATSC (QAM_B) and etc;...
Page 5
1 x Power Cable 2.Setup Process Overview This manual provides instructions on how to set up the TBS6032 in the Kylone system. The setup process involves logging into the Kylone system, configuring modulation parameters, multiplexing programs, and distributing the multiplexed streams to the modulator device.
Page 6
Username: admin Password: kylone@1 4.Verifying Modulator Card Device Once logged in, navigate to "Live Streams---TS Submission---Modulators" to check if the TBS6032 device has been loaded. If this is your first time, click "Scan" to load the TBS6032 device. Address: East Room, 3/F Bldg. B, Xinghong Industrial Park, Shuiku RD., Xixiang Town, Bao’an District, SZ, China, 518055...
Page 7
5. Configuring Modulation Parameters To configure the modulation parameters, edit the TBS6032 device and set the following parameters: Frequency: Set the first frequency, and the rest will be automatically set to "+8Mhz." The frequency range supports 100 to 858Mhz.
Page 8
6.Program Multiplexing Create “mpts” for modulator device Live Streams---TS Submission---Multiplexers: Address: East Room, 3/F Bldg. B, Xinghong Industrial Park, Shuiku RD., Xixiang Town, Bao’an District, SZ, China, 518055 8 / 16...
Page 9
6.1Programs-Available Items: All available programs which is ready to be taken as Modulator sources. It could be DVB channels, Video Encoder channels, Network streams or Local ts files. Address: East Room, 3/F Bldg. B, Xinghong Industrial Park, Shuiku RD., Xixiang Town, Bao’an District, SZ, China, 518055 9 / 16...
Page 10
For example, DVB sources: received by TBS6916 DVBS/S2/S2X 16-tuner card. 6.2Video Encoder sources: Sources come from TBS Encoder, for example, TBS2603au, TBS2603 PoE, TBS2604 V2, TBS2640 V2 , Address: East Room, 3/F Bldg. B, Xinghong Industrial Park, Shuiku RD., Xixiang Town, Bao’an District, SZ, China, 518055 10 / 16...
Page 11
TBS6304X, and etc. Encoder “http” stream out and input to Kylone system: Encoder “UDP multicast” stream out and then input to Kylone system: Address: East Room, 3/F Bldg. B, Xinghong Industrial Park, Shuiku RD., Xixiang Town, Bao’an District, SZ, China, 518055 11 / 16...
Page 12
Local TS file sources: Address: East Room, 3/F Bldg. B, Xinghong Industrial Park, Shuiku RD., Xixiang Town, Bao’an District, SZ, China, 518055 12 / 16...
Page 13
Multiplexers: remux multiple “SPTS” to “MPTS” MPTS1 MPTS2 For “how many channels we can put to a single Frequency”? This depends on the “Modulation, Symbol rate” you set. DVBC modulating ability, please refer to this web site:https://umt-tv.com/bitrate-calculator-dvb-c ...
Page 14
Frequency. 7.Distributing Multiplexed Streams to Modulator Device After creating the MPTS, distribute it to the TBS6032 QAM modulator. The number of channels that can be placed on a single frequency depends on the modulation and symbol rate settings.
Page 15
8. Submitting Configurations Once all configurations are complete, click "Commit" to activate your settings. 9. Checking Modulator Status On the "Status" page, you can view the modulator status. For example, you can see how many frequencies are currently being modulated. 10.
Page 16
CAUTION: Do not use scented hydrocarbons or colorized solvents. The cover should be cleaned by means of a light solution of detergent and water applied with a soft cloth. Dry thoroughly before using the system again. CAUTION: Do not use for the cleaning alcohol or its derivatives, these products can attack the ...
Need help?
Do you have a question about the TBS6032 and is the answer not in the manual?
Questions and answers