sesamsec Secpass User Manual

Ip-based intelligent controller in din rail format

Hide thumbs

page of 27

/ 27
Bookmarks

Quick Links

Download this manual

Secpass

IP-based intelligent controller in DIN rail format

USER MANUAL

Need help?

Do you have a question about the Secpass and is the answer not in the manual?

Questions and answers

Summary of Contents for sesamsec Secpass

Page 1 Secpass IP-based intelligent controller in DIN rail format USER MANUAL...
Page 2 5.2.3 “ADB” SUBMENU ...........................12 5.2.4 “OTG USB” SUBMENU ........................12 5.2.5 “SCREEN SAVER” SUBMENU ......................13 5.2.6 CONFIGURATION VIA SECPASS INSTALLER APP ................14 COMPLIANCE STATEMENTS ..........................16 EU ....................................16 APPENDIX....................................17 B – TERMS AND ABBREVIATIONS ..........................17 C – REVISION HISTORY ..............................17...
Page 3 (www.sesamsec.com) or contact sesamsec technical support at support@sesamsec.com In case of questions regarding your product order, contact your Sales representative or sesamsec customer service at info@sesamsec.com © 2024 sesamsec GmbH – Secpass – user manual – DocRev01 – EN – 10/2024 Page 3 of 27...
Page 4 ESD protective measures during the installation of the product. Please also refer to the safety information in Chapter “Installation”. © 2024 sesamsec GmbH – Secpass – user manual – DocRev01 – EN – 10/2024 Page 4 of 27...
Page 5 The user is liable for the use of spare parts or accessories other than the ones sold or recommended by sesamsec. sesamsec excludes any liability for damages or injuries resulting from the use of spare parts or accessories other than the ones sold or recommended by sesamsec.
Page 6 Any failure to comply with the safety information given in this document is considered improper use. sesamsec excludes any liability in case of improper use or faulty product installation. © 2024 sesamsec GmbH – Secpass – user manual – DocRev01 – EN – 10/2024 Page 6 of 27...
Page 8 Secpass is equipped with one display, 2 reader busses, 4 outputs, 8 inputs, an Ethernet port and a power connection (Fig. 2). Fig. 2 TECHNICAL SPECIFICATIONS Dimensions (L x W x H) Approx. 105.80 x 107.10 x 64.50 mm / 4.17 x 4.22 x 2.54 inch Weight Approx.
Page 9 (e.g. serial number) and may not be removed or damaged. In case of a label wear-out, contact sesamsec. © 2024 sesamsec GmbH – Secpass – user manual – DocRev01 – EN – 10/2024 Page 9 of 27...
Page 10 INSTALLATION OVERVIEW The illustration below gives an overview on an exemplary installation of a Secpass controller in a distribution box with mounting rail and additional components recommended by sesamsec: © 2024 sesamsec GmbH – Secpass – user manual – DocRev01 – EN – 10/2024...
Page 11 Relay (optional) Strain relief Cable shield connection on the rail Cable labeling Cable duct Fig. 4 During each installation of a Secpass controller, it is recommended to note the following information: • • Customer Controller name • • Secpass ID IP address •...
Page 12 Secpass controllers can only be mounted on a 35 mm rail (DIN EN 60715). The components above are recommended by sesamsec for an installation in Germany. For the installation of a Secpass controller in another country or region, contact sesamsec.
Page 13 The reader bus 2 consists of Reader 3 and Reader 4, each of them being assigned with an own address: Reader 3: Address 0 Reader 4: Address 1 © 2024 sesamsec GmbH – Secpass – user manual – DocRev01 – EN – 10/2024 Page 4 of 27...
Page 14 In addition, all cables used in PS2 circuits must comply with IEC 60332. © 2024 sesamsec GmbH – Secpass – user manual – DocRev01 – EN – 10/2024 Page 5 of 27...
Page 15 By default, “Accesspoint state” is automatically enabled. As soon as there is no WiFi communication anymore for more than 15 minutes, “Accesspoint state” is automatically disabled. © 2024 sesamsec GmbH – Secpass – user manual – DocRev01 – EN – 10/2024 Page 6 of 27...
Page 16 The “RESET DATABASE” submenu enables to delete all data in the access database, without resetting the controller software version. © 2024 sesamsec GmbH – Secpass – user manual – DocRev01 – EN – 10/2024 Page 7 of 27...
Page 17 ON” to connect it) above the “CANCEL” button. A new screen appears and shows the progress status of the hotspot connection (Fig. 11). Fig. 11 © 2024 sesamsec GmbH – Secpass – user manual – DocRev01 – EN – 10/2024 Page 8 of 27...
Page 18 The “RESET TO FACTORY” submenu enables to reset the controller software to the factory settings. To do so, proceed as follows: Tap “RESET TO FACTORY” in the configuration menu. The following notification appears: Fig. 15 © 2024 sesamsec GmbH – Secpass – user manual – DocRev01 – EN – 10/2024 Page 9 of 27...
Page 19 When tapping “Deny”, the controller does not know where to find a runnable app. In this case, it is necessary to tap “Allow” again. © 2024 sesamsec GmbH – Secpass – user manual – DocRev01 – EN – 10/2024 Page 10 of 27...
Page 20 To do so, proceed as follows: Tap “RESET DATABASE” in the configuration menu. The following notification appears: Fig. 22 © 2024 sesamsec GmbH – Secpass – user manual – DocRev01 – EN – 10/2024 Page 11 of 27...
Page 21 USB, e.g. a scanner of a keyboard. This might be necessary, for example to enter the controller serial number after reset. © 2024 sesamsec GmbH – Secpass – user manual – DocRev01 – EN – 10/2024 Page 12 of 27...
Page 22 To do so, proceed as follows: In the configuration menu (Fig. 8), tap “SCREEN SAVER”. The following window appears: Fig. 29 © 2024 sesamsec GmbH – Secpass – user manual – DocRev01 – EN – 10/2024 Page 13 of 27...
Page 23 Fig. 32 The display backlight switches on again. CONFIGURATION VIA SECPASS INSTALLER APP Alternatively, the controller can also be configured with the Secpass Installer app installed on an Android device (smartphone, tablet). To do so, proceed as follows: In your mobile device settings, go to Network & internet and turn WiFi on.
Page 24 Fig. 33 The Secpass Installer app offers different options for a quick and easy configuration of the controller. The table below gives a short overview of these options: Basic Seamlessly set up crucial parameters such as date, time, and more, ensuring configuration the door controller operates flawlessly within your environment.
Page 25 Hereby, sesamsec GmbH declares that Secpass complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: sesamsec.me/approvals © 2024 sesamsec GmbH – Secpass – user manual – DocRev01 – EN – 10/2024 Page 16 of 27...
Page 26 RFID radio frequency identification surge protection device C – REVISION HISTORY VERSION CHANGE DESCRIPTION EDITION First edition 10/2024 © 2024 sesamsec GmbH – Secpass – user manual – DocRev01 – EN – 10/2024 Page 17 of 27...
Page 27 Any additional requirement for a specific customer application has to be validated by the customer themselves at their own responsibility.