Accord F1027 Assembling Instruction

H O M E
F1027/F1028
H03
02
03
WARNING!
!
THE TABLE MUST NOT BE USED AS A SUPPORT SURFACE
TO CLIMB OR SIT IN
Accord Home guarantees coverage against manufacturing defects including
finishes, for a period of three months, under normal use from the date of purchase.
For warranty service, please contact your local dealer for further instructions.
Proof of date of purchase will be required for validation of warranty service.
www.accordlighting.com
ASSEMBLING, USE AND CONSERVATION
S1
A
B
PROVIDED SCREWS
S1
INSTRUCTIONS - USA & CANADA
COLLECTION: Clean
APPLICATION: Badside Table
DESCRIPTION: Accord Clean Bedside Table
MATERIALS: Natural wood veneer, MDF, carbon steel.
Read carefully all the instructions for the removal of the package and
for the correct assembling, use and application:
ASSEMBLING THE TABLE
Remove the protecting package taking care to not scratch or cut
01
the product. Place the curved parts of the table in a flat and clean
surface to avoid scratchs in the natural wood during the
assembling process.
02 With the lower holes of the niche facing upwards, proceed the
assembling of the metal rods in the niche holes. To perform this
operation, use the provided screws (S1) and 4mm allen wrench
to secure the proper fixation of the metal rods in the furniture.
Next, insert the base (B) between the metalic rods and the existing
03
cutout in the base, fix it with the screws (S1), following the
instructions as shown in the diagram.
After all the processes carried out, arrange the table in the
04
desired location.
Your table is ready for use!