FERN LIVING Derwent 135769 Assembly Instructions Manual

Assembly instructions
Derwent Hanging
Egg Chair
Article no. 135769, Batch no. 3300000999
IMPORTANT, KEEP FOR LATER REFERENCE:
READ CAREFULLY.
For private use in outdoor and living areas.
SAFETY INSTRUCTIONS AND WARNINGS
The product is to be used exclusively for its intended purpose.
Check all screw connections and foot caps during assembly and then regularly after and retight-
en the screws if necessary. Loose screw connections and missing or incorrectly inserted foot caps
impair stability and there is a risk of injury.
Regularly check the condition and functionality of the product. If you notice any damage, the
product should no longer be used.
Only use the product on solid and level ground.
Make sure the product is positioned securely.
WARNING! Risk of clamping/crushing fingers during assembly and disassembly of the product.
WARNING! Risk of crushing fingers at the shear point.
Maximum load: 110 kg
CAUTION! Do not swing in the hanging chair! Secure the chair to the carrying structure using the
supplied retaining strap K. Follow the assembly instructions.
CLEANING AND MAINTENANCE
Our steel garden furniture is protected by a high quality coating, applied using a complex pro-
cess; this coating makes the furniture weatherproof and hardwearing.
If the coating or connecting pieces are damaged (by scratches, scuff marks etc.) a small amount
of rust may develop. These patches of rust can be treated easily by using off-the-shelf rust re-
mover.
135769-330000999 FERN Anleitung_EN_6S.indd 1 135769-330000999 FERN Anleitung_EN_6S.indd 1 20.12.23 09:34 20.12.23 09:34