CADDX GM1 User Manual

GM1
USER MANUAL
Connection and Use
Connect to the USB port of Avatar V2 VTX, and need to use Avatar Goggles
1
that support head tracking to realize wireless head tracking function.
PM1
2
The channel is for gimbal working mode selection, there are three working
modes in total.
1: Pitch and roll keep level, yaw axis follows.
2: Pitch axis keeps level, roll axis and yaw axis follow.
3: Three-axis follow.
PM2
The channel is for gimbal follow sensitivity settings. Adjust the response
speed of the gimbal follow. Please use the knob channel on the remote
control to control.
PM3
The channel is the gimbal pitch axis control channel. Please use the rotary
switch on the remote controller to control it. The gimbal rotation angle range
can be changed by modifying the channel range of the remote control.
Model
*
VCC(7V-26V)
1
GND
Camera Compatibility
RX
TX
Image Stabilization
PWM 1
PWM 2 *
Max Controllable Speed
2
PWM 3
Max Controlled Rotational
Range
Size
Weight
Control Mode
Head Tracking Control
Voltage
Static Power Dissipation
Installation Dimensions
GM1
19mm FPV Camera
±0.005°
±1500°/s
Pitch: ±120°
32.2x38.1x20.5mm
16g
PWM /UART
Support
7~26V
1.0W
8
M 1.4
Unit: mm
29