Advertisement
Quick Links
Tools needed: Screwdriver; Allen keys (5
mm & 6 mm), torque wrench, hexagon bit
adapters (5 mm & 6 mm)
Grinder DXG 25-11 & DXGM 25-11
Assembly of
Assemble the upper Impeller washer
Assemble the impeller onto the shaft
Assemble the impeller screw and the
lower impeller washer
Advertisement
Summary of Contents for Xylem FLYGT DXG 25-11
- Page 1 Grinder DXG 25-11 & DXGM 25-11 Assembly of Tools needed: Screwdriver; Allen keys (5 Assemble the upper Impeller washer mm & 6 mm), torque wrench, hexagon bit adapters (5 mm & 6 mm) Assemble the impeller onto the shaft Assemble the impeller screw and the lower impeller washer...
- Page 2 Tighten the impeller screw. Tightening torque 25 Nm Assemble the Suction Cover. Tightening torque 9,3 Nm...
- Page 3 Assemble the Cutter Plate. Tightening torque 9,3 Nm TRIMMING OF CUTTER WHEEL: Turn the Cutter Wheel onto the threaded part of the Impeller Screw until the Cutter Wheel touch the Cutter Plate...
- Page 4 TRIMMING OF CUTTER WHEEL Assemble the stop screw into the threaded center of the Cutter Wheel TRIMMING OF CUTTER WHEEL Lock the Cutter Wheel from rotating with a Screwdriver and fix the Cutter Wheel by tapping on the Allen key. After this moment, check that the Cutter Wheel rotates freely and check that the maximum distance between the Cutter...
- Page 5 Disassembly of Tools needed: Screwdriver; Allen keys Lock the Cutter Wheel from rotating by a (5 mm & 6 mm), hammer, mandrel, multiple Screw Driver pliers Loosen the Stop Screw (one turn around is enough) Knock carefully with a mandrel on one of the cutter blades to loosen the Cutter Wheel.
- Page 6 Unscrew the three Cutter Plate screws and dismantle the Cutter Plate Unscrew the three Suction Cover screws and dismantle the Suction Cover...
- Page 7 Unscrew the impeller Screw Dismantle the Impeller by using a 1 inch socket and a screw driver. Screw the socket onto the impeller hub and loosen the impeller by bending with a screw driver Dismantle the upper Impeller washer...
Need help?
Do you have a question about the FLYGT DXG 25-11 and is the answer not in the manual?
Questions and answers