Do you have a question about the FloodStop FSTP50 and is the answer not in the manual?
Questions and answers
Summary of Contents for IPS FloodStop FSTP50
Page 1
TRANSFER PUMP INSTRUCTION AND OPERATING MANUAL Models FSTP50 Specifications Power Supply Requirements 115 VAC, 60 Hz AMP Rating 7 Amps Temperature Rating 32°F to 95°F Discharge 3/4 in. Suction 3/4 in. IMPORTANT! READ ALL INSTRUCTIONS CONTAINED IN THIS MANUAL BEFORE USING THIS PRODUCT. Save these instructions for future reference.
SAFETY FIRST! This instruction manual contains very important information for you to know and understand. This information is provided for your safety and to help prevent equipment problems from occurring. Please observe all safety information labeled danger, warning, caution, and notice. WARNING INDICATES A POTENTIALLY HAZARDOUS SITUATION WHICH, IF NOT WARNING AVOIDED, COULD RESULT IN DEATH, SERIOUS INJURY OR MAJOR PROPERTY...
PERFORMANCE GPH of Water @ Discharge Pressure MODEL Max. PSI 0 PSI 10 PSI 20 PSI 30 PSI 40 PSI FSTP50 1500 1100 INSTALLATION 1. Attach plastic pipe or reinforced heavy-duty hose to the INLET on the pump. Make sure the Inlet connection is airtight. Attach the Hose Strainer to the other end of the pipe or hose to prevent debris from entering the pump.
TROUBLESHOOTING PROBLEM POTENTIAL CAUSE POSSIBLE SOLUTION Pump will not begin 1. Air leak in suction line. 1. Repair or replace suction line. Make sure fittings are air tight and use pumping or retain prime 2. Fittings are not tight. thread sealant tape if necessary. after operating, or stops 3.
TERMS AND CONDITIONS OF SALE Orders for this product are expressly made conditional on buyer’s assent to company’s terms and conditions of sale, which can be found by scanning the QR code below, or are available upon request by mail. Any terms and conditions in any of buyer’s documents that are inconsistent with or add to seller’s terms and conditions of sale are hereby rejected and are not binding upon company.
Need help?
Do you have a question about the FloodStop FSTP50 and is the answer not in the manual?
Questions and answers