Kamar RT0019 User Manual

User manual
RT0019
Torque wrench 19-110Nm 3/8"
Technical data
• Socket mounting size: 3/8"
• Tightening torque range: 19-110Nm
• Total length: 375mm
Functions
• Precise tightening of bolts or nuts
• Enables the screw to be tightened to the recommended value
• Prevents thread overtightening
• Storage case included
Mounting method
• Before setting the desired torque, release the lock (UNLOCK) fig.1
To select the appropriate torque, turn the adjustment handle to the desired position, turn it to the right to increase the torque value, turn it to the
•
left to decrease the torque value, Fig.2
• After completing the setting, lock the key (LOCK) fig.1
• After setting the appropriate torque and placing the wrench in the bolt, apply the force to the handle of the torque wrench until it "clicks"
After a long period of time without using the wrench, set a higher torque to evenly distribute the lubricant throughout the internal components of
•
the device
• When the tool is not in use, set the torque to the lowest setting
•
• fig.1
Warnings
• Use as intended
Any unauthorized interference with the wrench is associated with the loss of warranty
•
• The device must be used and keeped out of reach of children
We reserve the right to change technical data and possible errors. Photos/drawing and
technical data are only illustrative, and given product may slightly differ from them. Coping the
part or the entire package without the written authorization is forbidden. All rights reserved.
fig.2
Terms of warranty:
- we provide a guarantee for a period of 24 months from the date of sale,
- any unauthorized interference with the item entails the loss of the guarantee.
Importer: KAMAR Knapkiewicz S.K.A.
al. Armii Krajowej 254
85-689 Bydgoszcz, Poland
Country of origin: PRC
www.myKAMAR.com