NAD VISO SPEAKERS Owner's Manual page 12

4. While at the "Listening Mode" menu item, use the [ ] button to select "DVS
Reference" – this is the calibrated listening mode setting when using the
NAD VISO TWENTY speakers.
5. Use the [ ] button to scroll down to the "Save & Exit" menu item. Press
[ENTER] to save the new settings and at the same time exit the Listening
Mode menu. Press [SETUP] button to completely exit the Setup menu
OSD.
NOTE
The Listening Mode can also be alternatively set to "DVS Reference" by
directly pressing the front panel [SURROUND MODE] button. With disc loaded
or while at other Sources, toggle the front panel [SURROUND MODE] button
until "DVS Reference" mode.
Speaker Settings
1. Using the HTR 6 remote control, press the [SETUP] button. The SETUP
menu On-Screen-Display (OSD) will be shown in your TV/Monitor.
2. With "Audio Setup Menu" highlighted, press [ENTER] button and you will
be directed to "Audio Setup Menu" OSD. Use the [ ] button to scroll down
to the "Speaker Settings" menu item.
Listening Mode
Mode
Do not Save & Exit
Save & Exit
Setup Menu
Audio Setup Menu
Video Setup Menu
OSD Language
Exit
12
DVS Reference