Advertisement
Quick Links
Advertisement
Summary of Contents for V-TUF VTX-10L
- Page 1 VTX-10L PRESSURE SPRAYERS Please read this manual before using the VTX-10L...
- Page 2 CE DECLARATION OF CONFORMITY In accordance with: - European Machinery Directive 2006/42/EC annex II.A and other applicable Directives the society, as manufacturer, confirm that the machinery PRESSURE SPRAYER comply with the Machinery Directive 2006/42/CE Art. 1, § 1 and Art. 2, § a) 1st section. We herewith confirm that those parts exposed to pressure comply with the directive 2014/68/UE Art.
- Page 3 ASSEMBLY Black pressure Filter regulator Blue - Yellow - Green CLICK! RIPETERE REPEAT CLICK!
- Page 4 ASSEMBLY NOZZLE FLAT FAN NOZZLE CONE NOZZLE 60° 40° R+S+T R+S+T 0° - 60° Red - Green Blue - Yellow 65 cm 45 cm 105 cm 65 cm + 40 cm 110 cm 70 cm + 40 cm plate cone plate resin brass maxi brass...
- Page 5 INSTRUCTIONS/MAINTENANCE GASKETS SPECIAL FOR CHEMICALS EPDM FPM (VITON®) CLEANING DETERGENTS, DESCALERS, ACID ORGANIC FUEL, ACIDS & INORGANIC, BLEACHING AGENTS DISINFECTION ALCOHOLS, DISINFECTANTS INSTRUCTIONS/MAINTENANCE BUILDING SCALE REMOVERS, WATERPROOFING, IMPREGNATING AGENTS, ANTI-MOULD LUBRICATION HYDRAULIC FLUIDS OILS, LUBRICANTS 60° Temperature of liquid Mix chemical product in a separate container and pour in through the lter ( lter mesh 8 - 1.2x1.8 mm).
- Page 6 IMPORTANT INFORMATION Some pictograms in the (instruction booklet) may be not included on the sprayer. The user must always ask the dealer for the safety card of the chemical product to be used, also for disposal of the residual liquid. The use of substances not complying with current regulations is at user’s own risk Never open the pump when under pressure.
- Page 7 TROUBLESHOOTING The pump is under pressure but the liquid does not come out. A) Make sure the ow regulator (OPTIONAL) is open. B) Check if the lter or lance nozzle are clogged. If so, disassemble the movable parts and remove any deposits with a jet of water or air. The pump fails to pressurize: a) There is little liquid in the container.
- Page 8 WARRANTY TERMS The manufacturer shall repair or replace, through the dealer, any parts of the product found to be faulty due to manufacturing defects, for a period of 24 months as of the date of purchase. The warranty does not cover defects due to tampering, improper use or wear. The warranty is valid only if the customer returns to the product to the dealer complete in all its parts together with the receipt or other document proving the date of purchase SPARE PARTS...
Need help?
Do you have a question about the VTX-10L and is the answer not in the manual?
Questions and answers