Page 1
RD-HWK300 Hardwire Kit Installation Manual Pioneer Electronics Australia Pty Ltd Unit 13, 135-155 Rooks Road, Vermont, Victoria, 3133, Australia Tel: (03) 9586-6300...
Page 2
This guide is intended to explain you the basic functions of this unit. After-Sales service for Pioneer Products Please contact the authorized Pioneer dealer from which you purchased this unit or an authorized Pioneer service company for after-sales service or questions you may have about the product.
Page 3
Ensure that the vehicle engine is periodically started to ensure that the battery voltage does not drop. • Do not use with anything other than Pioneer Dash Camera Check supported models at the Pioneer website www.pioneer.com.au •...
Page 4
Before Installing the Product INSTALLATION PRECAUTIONS • Use a double sided tape to securely affix the product to the vehicle. • Recommended mounting locations are inside the kick panel or glove compartment. • Mount on a flat, oil-free surface. • Mounting on anything other than a flat surface may result in the product falling off.
Page 5
Connecting Connection terminal connection and removal • Connect the connection terminals securely. If the terminals do not go in smoothly, they may be reversed. Check the terminal orientation. Do not insert terminals with excessive force. Doing so may result in malfunction. •...
Page 6
Connecting Diagram Ground (Black) Black (GND) Securely connect to the metal part of the vehicle body. + Battery power supply (Yellow) Fuse Always connect to the power circuit that is supplied with Yellow (BAT+) power from the battery, regardless of whether the vehicle engine switch is ON or OFF.
Need help?
Do you have a question about the RD-HWK300 and is the answer not in the manual?
Questions and answers