APRILIA RSV MILLE SPORT - PART 3 1999 Manual page 20

Carefully read p. 51 (MAINTENANCE).
N
Remove the air cleaner, see p. 58 (AIR
CLEANER).
N
Disconnect the pipe (1).
N
Withdraw the suction pressure sensor
(2) from its coupling.
N
Unscrew and remove the six screws (3).
CAUTION
For the removal of the air cleaner case
(4) proceed with the greatest care, lif-
ting it with slight movements.
N
Raise and remove the air cleaner case
(4).
70
use and maintenance RSV mille Sport Production
CAUTION
Plug the openings with a clean cloth, to
prevent any foreign matters from get-
ting into the suction ducts.
CAUTION
Upon reassembly:
– The two conveyors (5) must be posi-
tioned correctly and adhere perfectly
to the spongy material (6) around the
front air intake holes.
– Before tightening the screws (3),
make sure that the air cleaner case
(4) rests completely on the throttle
body.