Subscribe to Our Youtube Channel
Related Manuals for Blackbox LES1600 Series
Summary of Contents for Blackbox LES1600 Series
- Page 1 STEP X - Name of Step QUICK START GUIDE LES1604A, LES1604A-V, LES1604A-T, LES1604A-R, LES1608A CONSOLE SERVERS 24/7 TECHNICAL SUPPORT AT 877.877.2269 OR VISIT BLACKBOX.COM...
- Page 2 Your package should include the following • DEFAULT IP ADDRESS: 192.168.0.1/24 items. If anything is missing or damaged, contact Black Box Technical Support at 877-877-2269 or info@blackbox.com. • (1) LES1604A, LES1604A-V, LES1604A-T, OPTIONAL: DOWNLOAD USER MANUAL LES1604A-R OR LES1608A CONSOLE...
- Page 3 STEP 2 - Assemble the Hardware 1. If free-standing: attach the adhesive-backed 5. Connect other devices to the Console Server’s rubber feet to the Console Server’s base. free serial ports, USB ports and NET2 Ethernet ports. 2. If rackmounted: attach the rackmount kit to the side of the Console Server that will be 6.
- Page 4 STEP 3 - Connect to the Console Server The Console Server is addressable at either 3. Enter the default system username of two IP addresses: and password: • Its built-in address of 192.168.0.1/24. • USERNAME: ROOT • The address its on-by-default DHCP client •...
- Page 5 STEP 4 - Set the Root User's Password Set a strong, high-entropy password for the root user. 1. Click Serial & Network > Users & Groups. 2. Click Edit for the Root User. 3. Enter a strong, high-entropy passcode in the Password field. 4.
- Page 6 STEP 5- Set NET1’s Network Configuration Method 1. Click System > IP. 2. Click Network Interface if it is not the front-most tab. 3. For Configuration Method, click either the DHCP or Static radio button. 4. If Static, enter an IP Address and Subnet Mask for the NET1 interface.
- Page 7 STEP 6 - Set NET2’s Network Configuration Method 6. Click Apply. The four Ethernet ports that make up NET2 are set to inactive by default. To activate them: NOTE: the Console Server’s firewall determines which protocols and services can access which 1.
- Page 8 STEP 7 - Configure Managed Devices 1. Click Serial & Network > Serial Port. The 4. To enable remote access to the device, Console Server’s serial ports and their labels, check the Console Server Mode radio button modes and protocols display. To configure in Console Server Settings and click a port: the checkboxes for allowed protocols...
- Page 9 NOTES...
- Page 10 STEP X - Name of Step COPYRIGHT 2017 BLACK BOX CORPORATION. ALL RIGHTS RESERVED.
Need help?
Do you have a question about the LES1600 Series and is the answer not in the manual?
Questions and answers