Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Intelbras PSR720-56A
- Page 1 Intelbras PSR720-56A Power Module User Manual...
- Page 2 Intelbras PSR720-56A Power Module User Manual Power module overview PSR720-56A is an AC-input and DC-output power module. It provides a maximum output of 720 W and delivers the following features: Table 1 - Features Feature Description Protection against over-current input, under-voltage input, over-voltage output, output current limiting, Protection output short circuit, and over-temperature.
- Page 3 Intelbras PSR720-56A Power Module User Manual Relative humidity 5% to 95%...
- Page 4 Intelbras PSR720-56A Power Module User Manual Appearance Figure 1 - Appearance (1) Input status LED (AC OK) (2) AC-input power receptacle (3) Latch (4) Handle (5) Output status LED (DC OK) LEDs The power module has two status LEDs on its front panel.
- Page 5 • Do not place the power module in a wet area, and prevent liquid from flowing into the power module. • To avoid power module damage, do not open the power module. When the internal circuits or components of the power module fail, contact Intelbras Support. Tools Prepare an ESD wrist strap and a flat-blade screwdriver yourself.
- Page 6 Intelbras PSR720-56A Power Module User Manual Figure 2 - Installation procedure Install the power module Connect the power cord Turn on the circuit breaker install the power module: 1) Put on the ESD wrist strap and make sure the strap makes good skin contact and is reliably grounded.
- Page 7 Intelbras PSR720-56A Power Module User Manual If the power module is not aligned with the slot, pull out the power module, adjust its direction, and insert it again. Figure 4 - Installing the power module IMPORTANT: Keep the filler panel and the packaging box and packaging bag of the power module for future use.
- Page 8 Intelbras PSR720-56A Power Module User Manual To connect the power cord: 1) As shown in Figure 5, plug the female connector end of the AC power cord into the AC-input receptacle on the power module. 2) Use a cable tie to secure the power cord to the handle of the power module.
- Page 9 Intelbras PSR720-56A Power Module User Manual To remove the power module: 1) Turn off the circuit breaker at the power input end. 2) Put on the ESD wrist strap and make sure the strap makes good skin contact and is reliably grounded.
- Page 10 Intelbras PSR720-56A Power Module User Manual Box content: 1 x power supply NBR 14136 1 x 3.0 meters Brazil standard ( ) power cable...
Need help?
Do you have a question about the PSR720-56A and is the answer not in the manual?
Questions and answers