Download Print this page
Argos 01SHPPLSBIK0703-V2 Assembly Instructions
Argos 01SHPPLSBIK0703-V2 Assembly Instructions

Argos 01SHPPLSBIK0703-V2 Assembly Instructions

Advertisement

Quick Links

01SHPPLSBIK0703-V2
Overall Dimensions:
Length = 849cm
Width = 2223cm
Height = 1721cm
Base Dimensions:
Length = 795cm
Width = 1980cm
Before assembly
please make sure you have a
suitable base ready to erect your
building
MADE IN GREAT BRITAIN
BEFORE YOU START PLEASE READ INSTRUCTIONS CAREFULLY
- Check the pack and make sure you have all the parts listed.
- When you are ready to start, make sure you have the right tools at hand
(not supplied) including a Phillips screwdriver, Stanley knife, wood saw,
step ladder and drill with 2mm bit.
- Ensure there is plenty of space and a clean dry area for assembly.
TIMBER
As with all natural materials, timber can be a ected during various weather
conditions. For the duration of heavy or extended periods of rain, swelling of the
wood panels may occur. Warping of the wood may also occur during excessive
dry spells due to an interior moisture loss. Unfortunately, these processes cannot
be avoided but can be helped. It is suggested that the outdoor building is
sprayed with water during extended periods of warm sunshine and sheltered as
much as possible during rain or snow.
Our buildings are pre treated with a water based treatment**; this only helps to
protect the product during transit and for upto 3 months against mould. To
validate your guarantee and ensure longevity of the product, it is ESSENTIAL the
building is treated with a wood preserver within the rst three months of
assembly and thereafter in accordance with the manufactures recommenda-
tions. Care must be taken to ensure the product is placed on a suitable base.
BUILDING A BASE
When thinking about where the building and base is going to be constructed:
Ensure that there will be access to all sides for maintenance work and annual
treatment.
Ensure the base is level and is built on rm ground, to prevent distortion. Refer
to diagrams for the base dimensions, The base should be slightly smaller than
the external measurement of the building, i.e. The cladding should overlap the
base, creating a run o for water. It is also recommended that the oor be at
least 25mm above the surrounding ground level to avoid ooding.
**Protim Aquatan T5 (621)**
TYPES OF BASE
- Concrete 75mm laid on top of 75mm hard-core.
Your building has been treated with Aquatan.
- Slabs laid on 50mm of sharp sand.
Aquatan is a water-based concentrate which is diluted with water, the building as been treated by the correct
application of Aquatan solution and then allowed to dry.
Whilst all products manufactured are made to the
highest standards of Safety and in the case of childrens
Aquatan is a decorative nish to colour the wood, which is applied industrially to timber fence panels and garden
products independently tested to EN71 level, we cannot
buildings.
accept responsibility for your safety whilst erecting or
using this product.
Aquatan undiluted contains: boric acid, sodium hydroxide 32% solution, aqueos mixture of sodium dioctyl
sulphosuccinat and alcohols: 2, 4, 6-trichlorophenol.
x2
This building should be erected by
two adults
For ease of assembly, you must pilot
drill all screw holes and ensure all
screw heads are countersunk.
2mm Drill bit
Winter = High Moisture = Expansion
Summer = Low Moisture = Contraction
CAUTION
Every e ort has been made during the
manufacturing process to eliminate the
prospect of splinters on rough surfaces
of the timber. You are strongly advised
to wear gloves when working with or
handling rough sawn timer.
For Assistance Please
Contact Customer Care on
01636 880514
Please retain product label and instructions for future reference
Contents
1
2
Door Gable
5
Floor
x2
Fixing Kit
7
Eaves Frame 825mm x2
8
Ridge Bar 736mm
9
Fascia 1095mm x4
13
12
T Hinge
Pad Bolt
Qty 4
Nail Bag
30mm Black Screw x 3
40mm Screw x 52
50mm Screw x 26
Mercia Garden Products Limited, Sutton On Trent, Newark, Nottinghamshire, NG23 6QN
www.merciagardenproducts.co.uk
3
Plain Side
Back Gable
x2
6
Door
x2
10
Door Block 132mm x4
11
Finial x2
16
14
15
Turn Button
L-Bracket
Felt
Qty 2
Felt Tacks x 80
20mm Screw x 8
30mm Screw x 56
4
Roof
x2
Qty 2

Advertisement

loading
Need help?

Need help?

Do you have a question about the 01SHPPLSBIK0703-V2 and is the answer not in the manual?

Questions and answers

Summary of Contents for Argos 01SHPPLSBIK0703-V2

  • Page 1 01SHPPLSBIK0703-V2 Please retain product label and instructions for future reference Overall Dimensions: Contents Length = 849cm Width = 2223cm Height = 1721cm Base Dimensions: Length = 795cm Width = 1980cm Before assembly please make sure you have a suitable base ready to erect your...
  • Page 2 Pre Assembly Step 1 Place floor on firm and level base, ensure base has suitable drainage free from areas where water can collect. (See front page on base requirements). Remove transportation blocks Attach the floors using 10 x 40mm screws from the bottom of each panel before beginning assembly.
  • Page 3 Step 3 Step 5 Set the two roof Fix the corners with 50mm panels into position screws as shown in diagram. and fix to the side 9x50mm Screws panels and gables using 30mm screws. 24x40mm Screws Fix two eaves frames to each roof sheet using 3x30mm screws per eave.
  • Page 4 Step 7 Step 9 Cut out three strips of 1025mm Fit the door blocks to the doors felt and place onto the roof. as shown in the diagram with 2x30mm screws each and Place the felt flat onto the roof ensure that they sit flush with in the order that is stated on the door gable.
  • Page 5 It is ESSENTIAL that you apply wood treatment immediately after the building has been assembled. AFTER TREATMENT: score around protective cover on glazing and carefully peel covering back...