Download Print this page

Oliveri ACCBRRC Installation Instructions

Care toilet backrest

Advertisement

Quick Links

Care Toilet Backrest
ACCBRRC
Please install the Toilet Backrest according to this guide.
IMPORTANT
Prior to installation, test fit the Backrest to ensure it does not obstruct the operation of the toilet seat. Ensure the wall fixing
screws are anchored into masonry or timber. Do not install them directly into plasterboard. After installation, test the
Backrest to confirm stability and correct operation.
WARRANTY This Backrest is warranted to be free from manufacturing defects for a period of 5 years replacement parts and 1 year labour.
Subject to the terms contained in the full warranty information available at https://oliveri.com.au/service-and-warranty, where a genuine
manufacturing defect arises within the warranty period Oliveri will, at its election, repair the defect or replace the product.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for
a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
SERVICE
If the product requires servicing, please contact your installer. If the installer is satisfied that the problem is not due to poor installation, contact
Oliveri's nominated Warranty Service Agent for assistance on:
Ph: 08 8348 6444 (choose the after sales service and warranty option)
Email: warranty@oliveri.com.au
For full warranty information visit: https://oliveri.com.au/service-and-warranty
If a warranty service call finds that the product does not have a genuine manufacturing fault, our Warranty Service Agent reserves the right to
pass on any call-out fee to the householder.
PARTS LIST
Toilet backrest assembly
Wall plugs and screws (includes 4 sets)
IMPORTANT: Never use abrasive or harsh chemical cleaners. Wipe with warm soapy water to maintain surface finish.
Oliveri Solutions Pty Ltd ABN 12 007 551 886 51 Naweena Rd, Regency Park SA 5010 P 08 8348 6444 E sales@oliveri.com.au
Installation Instructions
Aug 2023 / Version1
560
32
360
310
120
25
ACCBRRC

Advertisement

loading
Need help?

Need help?

Do you have a question about the ACCBRRC and is the answer not in the manual?

Questions and answers

Summary of Contents for Oliveri ACCBRRC

  • Page 1 Wall plugs and screws (includes 4 sets) IMPORTANT: Never use abrasive or harsh chemical cleaners. Wipe with warm soapy water to maintain surface finish. Oliveri Solutions Pty Ltd ABN 12 007 551 886 51 Naweena Rd, Regency Park SA 5010 P 08 8348 6444 E sales@oliveri.com.au...
  • Page 2 Installation Steps Preparation Tools: Drill driver, 8 mm drill bit, hammer, pencil and level. Unscrew all end covers from Position the Backrest on the Unscrew the base plates from their base plates and carefully wall in the required location. the fixing nuts and set aside slide them along the rail away Check the Backrest is level and the Toilet Backrest.