Related Manuals for Mcombo 6160-PR622
Summary of Contents for Mcombo 6160-PR622
- Page 1 OWNER'S MANUAL NEWACME LLC www.mcombo.com sales@mcombo.com 6160-PR622/PR624 mcombo.com amazon.com/mcombo...
- Page 2 SUPPORT shields or other safety features of this product. • Fabric Care You will not refuse or neglect any retrofit kits that MCombo may provide to enhance • Faux Leather Care and preserve the safe use of this product. • Electronics Care •...
- Page 3 Do not place cord under carpet or in a loca�on where it could become worn. Read the safety and other instruc�ons thoroughly before using your MCombo® product. Failure to • Do not a�empt to disconnect the power plug by pulling the power cord. Always hold the power plug follow the guidelines, warnings in this manual and those located on your product can result in personal and pull it out.
- Page 4 • Please read these instruc�on thoroughly before using. your product. • Do not plug the power supply in un�l assembly complete. • Please contact us (See “MCombo Customer Support” on Page 32) immediately if anything is missing or damaged. Configura�on Selec�on Guide...
- Page 5 Product Parameters (Loveseat) Part List ( Loveseat ) No�ce • Use MCombo parts only for all replacements Le� Base x1 Box 2 of 3 Right Base x1 Specification Description Model No 6160-PR622 Rated Voltage 100 ~ 240V Rated Current Box 3 of 3...
- Page 6 Assembly Steps ( Loveseat ) ATTENTION The seat iron sheet needs to be installed on the iron frame, not under the iron frame. Finished Step1 - Bases Connec�on 1. Please use seat iron sheets (Part # 2 ) to connect the seat bases (Part #A, and #C) . When installing the steel sheets (Part # 2 ), please lightly �ghten the screws (Part # 4 ) first, no need to lock them, keep the steel sheets in a horizontal posi�on, finally �ghten all the screws (Part # 4 )when all steel sheets (Part # 2 ) are installed and the gap between the seats is adjusted.
- Page 7 Step2 - Armrests Assembly Step4 - Product Connec�ons 1. Align the brackets of armrest at the clips of the base (Figure). 1. No. a and No. b wires from the backrest and seat base with same color connect together. 2. Push firmly the brackets into the the base. Listen for a “click" on each side to ensure the 2.
- Page 8 Product Parameters (Loveseat with Console) Step5 - Paste Velcro 1.Place the loveseat in the reclined posi�on. 2.Pull out the Velcro in the gap between the base and the backrest and paste it well. Specification Description Model No 6160-PR624 Rated Voltage 100 ~ 240V Step6 - Final Check...
- Page 9 Part List ( Loveseat with Console) Assembly Steps ( Loveseat with Console) No�ce • Use MCombo parts only for all replacements. Le� Base x1 Box 2 of 4 Right Base x1 Box 3 of 4 Part Box 1 Massage Remote x2 Seat Iron Sheet x2 Le�...
- Page 10 Finished ATTENT The seat iron sheet needs to be installed on the iron frame, not under the iron frame.
- Page 11 Step2 - Armrests Assembly Step3 - Backrests Assembly 1. Please connect the storage console (Part #G) to the console backrest (Part #H) 1. Align the brackets of armrest at the clips of the base (Figure). using plas�c cover screws (Part # 9 ). 2.
- Page 12 Step5 - Paste Velcro Step4 - Product Connec�ons 1.Place the loveseat in the reclined posi�on. 1. No. a and No. b wires from the backrest and seat base with same color connect together. 2. No. c wire from the back connects to the massage remote. 2.Pull out the Velcro in the gap between the base and the backrest and paste it well.
- Page 13 If you discover a problem at any point during the setup and posi�oning of your power recliner sofa, the footrest to relax. stop and contact the MCombo Customer Support immediately. To avoid personal injury or product damage, do not plug the unit into the electrical outlet un�l the problem is corrected and do not a�empt to fix electrical problems by yourself.
- Page 14 IV. CARE AND MAINTENANCE Massage Remote Opera�on Instruc�on Your MCombo product will provide years of superior performance and sa�sfac� on with regular care and maintenance. To maintain the finish quality of your "assistant", please follow the guidelines and cleaning procedures provided below.
- Page 15 ● Check electrical components frequently for signs of corrosion and replace as necessary. ● Contact MCombo Customer Support if damage is present, do not fix it by yourself. • Make sure all the wires of the sofa are intact and connected properly.
- Page 16 NOTE: A�er unlocking the metal tabs on both sides of backrest, pull the backrest upward. If the product does not operate properly, please contact the MCombo Customer Support for help and never a�empt to make any repairs or adjustments yourself.
- Page 17 MCOMBO® will pay standard shipping rates on all warranted parts for the first year. We can also sell you replacement part for a discount price when your product is out of warranty policy.
- Page 18 VIII. RETURN REPLACEMENT POLICY IX. MCOMBO CUSTOMER SUPPORT If for any reason, we have fallen short of your expecta�ons, or if you have any ques�ons and su No�ce �ons, please refer to the following contact informa�on, we will do our best to work with y Why don't we recommend returning the item by yourself? make sure you are en�rely sa�sfied.
Need help?
Do you have a question about the 6160-PR622 and is the answer not in the manual?
Questions and answers