Current PROVIDENCE BOLLARD PROB-Y2-2030 Installation Manual

LED Upgrade Kit Installation Guide
Fixture: PROB - PROVIDENCE BOLLARD
TM
WARNING : Fixtures must be grounded in accordance with local codes or the National Electrical
!
Code. Failure to do so may result in serious personal injury.
MAINTENANCE : A regularly scheduled maintenance program should be established to retain optimum light
output and reduce heat retention. Dusting with a soft, clean, dry cloth is normally sufficient for the optics.
CAUTION : All wiring must be done by a qualified electrician. KEEP THIS SHEET FOR FUTURE REFERENCE.
Examine all parts that are not intended to be replaced by the retrofit kit for damage and replace any
damaged parts prior to installation of the retrofit kit.
Examinez toutes les parties qui ne sont pas destinés à être remplacé par le kit d'adaptation pour les
dommages et remplacer les pièces endommagées avant l'installation du kit de renovation.
UPGRADE KIT CONTENTS
1
5 2
4 2
3 6
2 1
1 1 LED RETRO-FIT OPTICAL ASSEMBLY
ITEM # QTY
93065378 REV. A
WSHR-No. 10 SPLIT LK SS
SCR-10-24x3/4 PHH PHMS SS
CONN-WAGO 2-WIRE 222-412
LED DRIVER STRAP ASSEMBLY
DESCRIPTION
A R C H I T E C T U R A L currentlighting.com/aal
© 2022 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change without
notice. All values are design or typical values when measured under laboratory conditions.
3
5
4
NOTES
PAGE 1/6
A R E A L I G H T I N G
2
is_providence_bollard_R01
Page 1 of 6
Rev 09/01/22