Page 3
.com c) Do not expose power tools to rain Warning! or wet conditions. Water entering a power tool will increase the risk of electric shock. Read all safety warnings and all d)Do not abuse the cord. Never use the instructions.
Page 4
.com or battery pack, picking up or carrying the d)Store idle power tools out of the tool. Carrying power tools with your nger reach of children and do not allow persons on the switch or energizing power tools unfamiliar with the power tool or these that have the switch on invites accidents.
Page 5
.com by the tool manufacturer. Just because the generated by various operations. The accessory can be attached to the power dust mask or respirator must be capable tool, it does not assure safe operation. ltrating particles generated by your c)The rated speed of the accessory operation.
Page 6
.com these materials. rotating accessory. Accessory o)Do not use accessories that require kickback over your hand. liquid coolants. Using water or other liquid c)Do not let your body in the area coolants may result in electrocution or where power tool will move if kickback shock.
Page 7
.com d)Always undamaged wheel in the work piece. Let the wheel reach full anges that are of correct size and shape speed and carefully reenter the cut. The for your selected wheel. Proper wheel wheel may bind, walk up or kickback if the anges support the wheel thus reducing power tool is restarted in the work piece.
Page 8
.com interference of the wire wheel or brush damaged cable. Do not touch the damaged with the guard. Wire wheel or brush may cable and pull the mains plug when the expand in diameter due to work load and cable is damaged while working.
Page 9
.com Before inserting the plug into the heart of the power tool. Exercise due care socket, check that the switch device away to ensure they don’t become damaged or from the unlocked position. e ected by oil or water.
Need help?
Do you have a question about the DG004 and is the answer not in the manual?
Questions and answers