Subscribe to Our Youtube Channel
Related Manuals for MONARCH INSTRUMENT ROS
Summary of Contents for MONARCH INSTRUMENT ROS
- Page 1 Instruction Manual ROS/ROSM Remote Optical Sensor/ Modulated Remote Optical Sensor 15 Columbia Drive Amherst, NH 03031 USA Phone: (603) 883-3390 • Fax: (603) 886-3300 E-mail: support@monarchinstrument.com Website: www.monarchinstrument.com...
- Page 2 This product may be returnable to your distributor for recycling; contact the distributor for details. Monarch Instrument’s Limited Warranty applies. www.monarchinstrument.com for details. Warranty Registration and Extended Warranty Coverage information is...
- Page 3 2.1 Connection Detail for Metal Plug ........2 2.2 Connection Detail for Molded Plug ........ 3 3.0 MODELS WITH TINNED WIRES..........3 3.1 Connection Detail for ROS-W/ROSM-5W ......3 4.0 OPERATION INSTRUCTIONS ..........3 5.0 SPECIFICATIONS ..............5 5.1 Dimensions of Mounting Bracket ........6 5.2 Compliance ..............
- Page 4 1.0 DESCRIPTION The ROS and ROSM are versatile Remote Optical Sensors that have a visible red LED light source and green LED On-Target Indicator. The sensors are housed in a threaded 303 stainless steel tube and are built with various length cables terminated with either tinned wires or 1/8"...
- Page 5 Tinned wires 2.0 MODELS WITH STEREO PLUG All ROS and ROSM models with the 1/8 inch [3.5 mm] male stereo plug are designed to plug into most Monarch tachometers and stroboscopes. The ROS-P and ROS-P-25 models will work directly with all Monarch handheld tachometers and stroboscopes that accept pulse input through an input jack (e.g.
- Page 6 2.2 Connection Detail for Molded Plug 3.0 MODELS WITH TINNED WIRES All ROS and ROSM models with tinned wires are designed to connect into any Monarch panel instrument that accepts pulse inputs (e.g. ACT Series, F2A1X and F2A3X Frequency to Analog Converters, DataChart™ 1250, DataChart™...
- Page 7 For most applications, a ½" [12 mm] square piece of Reflective Tape (T-5) should be applied to a clean area on the rotating object. The ROS and ROSM should be mounted (using the supplied jam nuts and aluminum mounting bracket) and optically aligned to illuminate the On- Target Indicator once per revolution.
- Page 8 88 °F (31 °C) decreasing linearly to 50% relative humidity at 104 °F (40 °C) 1/8 in. [3.5 mm] male stereo plug Connection (ROS-P, ROS-P-25 and ROSM-5P); Tinned wires (ROS-W, ROS-W-25 and ROSM-5W) ROS-P, ROS-W: 8 ft. [2.4 m] ROSM-5P: 8 ft. [2.4 m] Cable Length ROS-P-25: 25 ft.
- Page 9 5.1 Dimensions of Mounting Bracket (inches)
- Page 10 Declaration of Conformity for this product. NOTE: In order for the ROSM to be fully CE compliant, the supplied ferrite must be attached around the cable towards the ROSM end. 6.0 ACCESSORIES See the ROS Accessories webpage for details. Model Part Number Description SPSR-IM...
- Page 11 This page intentionally left blank.
- Page 12 Measure ● Monitor ● Maintain Monarch Instrument is committed to excellence and quality in manufacturing, sales, and service. ™ Track-It Data Loggers Panel Tachometers Portable Tachometers Portable Strobes Frequency Fixed Mounted Converters Strobes Speed Sensors DataChart ™ Paperless Recorders 15 Columbia Drive, Amherst NH 03031 USA Tel.: (603) 883-3390 // (800) 999-3390...
Need help?
Do you have a question about the ROS and is the answer not in the manual?
Questions and answers