Advertisement
Quick Links
Advertisement
Related Manuals for Alcochem Hygiene aetaire AIR300
Summary of Contents for Alcochem Hygiene aetaire AIR300
- Page 1 AIR300 AIR PURIFIER ENGLISH User Guide A product of Alcochem Hygiene AIR160 AIR160...
- Page 3 Content Important information About the AIR300 Control panel overview Putting the AIR300 into operation Installing/replacing filter modules Installing the AIR300 Maintenance/Cleaning When to change a filter element? Technical information FAQs and troubleshooting Warranty and service...
- Page 4 1. Important information Please read this User Guide carefully before you start using the AIR300. Keep the user guide for future reference. Turn off the power before carrying out repairs. • Do not use the machine in the vicinity of flammable •...
- Page 5 2. About the AIR300 Congratulations on your purchase and welcome to Aetaire air purifiers! The AIR300 air purifier uses the principle of circular ultraviolet disinfection to achieve lasting disinfection of the indoor air. The AIR300 can be used for special environments in hospitals, outpatient surgeries, ICUs, isolation wards and treatment rooms.
- Page 6 3. Control panel overview On/Off button PM2.5 value UV LED indicator This is read out soft-touch button for settings. automatically WiFi connection status Operating mode (only applicable to future models AUTO: To improve the indoor air quality, the speed is from 2022-23) adjusted according to the PM 2.5 dust content automatically detected by the laser sensor.
- Page 7 4. Putting the AIR300 into operation Switching the AIR300 on and off. Make sure the unit is connected to a power outlet. Press the On/Off button to turn on the AIR300. The AIR300 starts up in AUTO mode by default. When the AIR300 On/Off button is pressed, a green indicator lamp lights up (to the left of the button).
- Page 8 5. Installing/replacing a filter module When removing the filter panels and air outlet panel, a switch will turn off the power. Despite this safeguard, we recommend always unplugging the power cord as there may still be residual current in the unit. The AIR300 uses modular filters for HEPA + , TVOC and UV-C a.
- Page 9 Make sure that the side with the two retaining clips is facing you and that all hooks of the pre-filter are properly connected in the AIR300. Reset the AIR300 with a new HEPA+ or TVOC filter module (see page 11 - no. 8) e.
- Page 10 7. Maintenance/Cleaning Cleaning the upper panel (air outlet) of the AIR300 a. Press release button 1. b. Clean the top panel with a brush or a cloth. c. Reattach the top cover to the unit. First mount one side to the top of the AIR300, and then Press the release button press the other side in...
- Page 11 8. When should I replace a filter module? When do I replace a HEPA + or TVOC filter? The replacement cycle of the filter element is 6-12 months. When the screen shows this, please contact your supplier in good time to purchase new filters, so that they can be replaced without delay. The service life of the filter element is as follows: The remaining service life is less than 10%.
- Page 12 11. Warranty and service If you need any information or if you have a problem, go to the Aetaire website (www.aetaire.com) or contact Alcochem Hygiene +31(0)33 299 4139 or your local dealer. Ordering spare parts or accessories If you need to replace a part or if you want to buy an additional part, please contact an AIR300 dealer.
Need help?
Do you have a question about the aetaire AIR300 and is the answer not in the manual?
Questions and answers