Advertisement
Quick Links
Advertisement
Summary of Contents for Bridge BRIDGE+HOME
- Page 1 Error 89- 2x 52 Cards Calibration...
- Page 2 At Bridge Company we are proud about our Bridge+More solution and our unique support options we offer to our users worldwide, such • Internet based full insight, • Real time actions and immediately see the effect of a change, •...
- Page 3 Please check the cards and blow gently on the dealer's holes. Notice you can do a fast 4 card calibration (on each deck) or a thorough calibration of the bridge dealer’s UV readers with 2 * 52 cards When to do a calibration? if you experience an...
-
Page 4: Before You Start
How to calibrate the dealer-Error 89? MANUAL Before you start • Please control that the bridge dealer does not have dirt in the UV readers. • Blow gently to remove any dirt or remove it with a rubber blower. • Do not insert or use a sharp device or anything that can harm the UV readers or transmitters. - Page 5 1. Connect the tablet and card dealer as normal. 2. Make sure the card dealer has more than 30% battery else charge the bridge dealer first. you can easily find the Battery level at the Dealer's Menu. There are several other ways to see battery level –...
- Page 6 How to calibrate the dealer-Error 89? MANUAL 2x 52 Cards Calibration On the Dealer's Menu . 4. select “Calibration” – Calibration is one of the last menu items. Notice, you can see in the dealer information the last date and time the dealer was successfully calibrated. You can also see the dealers's battery level.
- Page 7 How to calibrate the dealer-Error 89? MANUAL Please arrange a deck of cards like shown in the picture. Card order: Spades Ace to King, Clubs Ace to King, Hearts Ace to King, Diamonds Ace to King. Please make sure that spades are on the bottom, and diamonds are at the top.
- Page 8 How to calibrate the dealer-Error 89? MANUAL 2x 52 Cards Calibration 6. Insert the correctly sorted cards, 7. close the dealer’s lid and 8. let the dealer deal the deck. If the dealer does not start open the lid again and close the lid again.
- Page 9 Info Codes The dealer – and the tablet will use the following information codes (Info codes). • Code 57 Calibration has been successful. Please do not worry Other related codes. about an eventual Red Error LED flashing. • Code during •...
- Page 10 Recommendations In the “Dealer Menu” you can also remove the calibration coefficients – please do not use unless you calibrate shortly after – Removing the coefficients can help if you have problems making two successful calibrations (we do not remove we actually set the calibration settings to default values).
- Page 11 We are always glad to assist you. For further information please write to: info@bridgeplusmore.com Visit our website www.bridgeplusmore.com Visit our info site www.bridgeplusinfo.com Our SHOP Please be part of our Social Media communities and learn more of the latest news and updates of our Bridge+More solution.
Need help?
Do you have a question about the BRIDGE+HOME and is the answer not in the manual?
Questions and answers