Page 1 MOTORIZED PROJECTOR LIFT USER MANUAL MODEL: ZG-TBTY We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 2 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
Page 3 SAFETY INSTRUCTIONS WARNING: Read this material before using this product. Failure to do so can result in serious injury. 1. Assemble only according to these instructions. Improper assembly can create hazards. 2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
Page 4 TECHNICAL SPECIFICATIONS Model ZG-TBTY Product Dimensions 300*400*1610 (LxWxH)(mm) Packing 440*340*120 Size(LxWxH)(mm) Net Weight(kg) About 3.6 Gross Weight(kg) About 4.4 *Products such as specifications, appearance, and design are subject to modification without prior notice. PACKAGE LIST - 3 -...
Page 5 ASSEMBLY STEP STEP1 Take G, and H; Put G on H. - 4 -...
Page 6 STEP2 Take A and B, take out the fitting screws J and tighten the screws with a Phillips screwdriver. STEP3 Tighten the hand screw. Take out the screw - 5 -...
Page 7 Take C, take out the bottom screw and fix it with the iron plate base in step 1, and then lock the hand screw on the plastic part of the base. STEP4 Take D (2 pieces) and connect it with C. - 6 -...
Page 8 STEP5 Take the E and connect it with the D, loosen the hand screw on the telescopic rod of the material 5 to adjust the appropriate height, and tighten the screw. - 7 -...
Page 9 STEP6 State 1 State 2 There are two ways to use it: State 1: the projector is screwed on the bracket, and the installation method takes I and screws it on the top of E, and then the projector is installed, and the angle can be adjusted;...
Page 10 State 2: The projector is placed on the tray. The installation method takes F and screws it into the top of E. Then, the tray installed in step 1 is fixed on the material 6, and the projector is placed. COMPLETION - 9 -...
Page 11 Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN. Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main. YH CONSULTING LIMITED.
Page 12 Technical Support and E-Warranty Certificate www.vevor.com/support...
Page 13 MOTORISIERTER PROJEKTORLIFT Benutzerhandbuch MODELL: ZG-TBTY We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 15 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
Page 16 SAFETY INSTRUCTIONS WARNUNG: Lesen Sie dieses Material, bevor Sie dieses Produkt verwenden. Andernfalls kann es zu schweren Verletzungen kommen. 9. Führen Sie die Montage nur gemäß dieser Anleitung durch. Eine unsachgemäße Montage kann zu Gefahren führen. 10. Tragen Sie während der Montage eine ANSI-geprüfte Schutzbrille und robuste Arbeitshandschuhe.
Page 17 BEWAHREN SIE DIESES HANDBUCH AUF TECHNICAL SPECIFICATIONS Modell ZG-TBTY Technische Daten 300*400*1610 (L x B x H) (mm) Verpackungsgröße (L x B 440*340*120 x H) (mm) Nettogewicht / kg) Über 3.6 Bruttogewicht (kg) Über 4.4 *Produkte wie Spezifikationen, Aussehen und Design können ohne vorherige Ankündigung geändert werden.
Page 18 E*2 F*1 G*2 H*1 Ich*2 J*2 ASSEMBLY STEP SCHRITT 1 Nehmen Sie G und H ; Setzen Sie G auf H. - 4 -...
Page 19 SCHRITT 2 Nehmen Sie A und B, lösen Sie die Passschrauben J und ziehen Sie die Schrauben mit einem Kreuzschlitzschraubendreher fest. SCHRITT 3 - 5 -...
Page 20 Tighten the hand screw. Take out the screw Nehmen Sie C, lösen Sie die untere Schraube und befestigen Sie sie in Schritt 1 mit der Eisenplattenbasis. Verriegeln Sie dann die Handschraube am Kunststoffteil der Basis. SCHRITT 4 - 6 -...
Page 21 Nehmen Sie D (2 Stück) und verbinden Sie es mit C. SCHRITT 5 - 7 -...
Page 22 Nehmen Sie das E und verbinden Sie es mit dem D , lösen Sie die Handschraube an der Teleskopstange des Materials 5, um die entsprechende Höhe einzustellen, und ziehen Sie die Schraube fest. SCHRITT6 - 8 -...
Page 23 Staat 1 Staat 2 Es gibt zwei Möglichkeiten, es zu verwenden : Zustand 1 : Der Projektor wird auf die Halterung geschraubt. Bei der Installationsmethode wird I oben auf E geschraubt . Anschließend wird der Projektor installiert und der Winkel kann angepasst werden. Zustand 2 : Der Projektor wird auf das Tablett gestellt.
Page 24 COMPLETION - 10 -...
Page 25 Hersteller: Shanghaimuxinmuyeyouxiangongsi Adresse: Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Shanghai 200000 CN. Nach AUS importiert: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australien Importiert in die USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main. YH CONSULTING LIMITED.
Page 26 Technisch Support und E-Garantie-Zertifikat www.vevor.com/support...
Page 27 SOLLEVATORE MOTORIZZATO PER PROIETTORI MANUALE D' uso MODELLO: ZG-TBTY We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 29 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
Page 30 SAFETY INSTRUCTIONS AVVERTIMENTO: Leggere questo materiale prima di utilizzare questo prodotto. In caso contrario si potrebbero causare lesioni gravi. 17. Assemblare solo secondo queste istruzioni. Un montaggio improprio può creare pericoli. 18. Indossare occhiali di sicurezza approvati ANSI e guanti da lavoro pesanti durante il montaggio.
Page 31 CONSERVA QUESTO MANUALE TECHNICAL SPECIFICATIONS Modello ZG-TBTY Dimensioni del prodotto 300*400*1610 (LxLxA)(mm) Dimensioni imballo 440*340*120 (LxLxA) (mm) Peso netto Circa 3.6 (chilogrammo) Peso lordo Circa 4.4 (chilogrammo) *Prodotti quali specifiche, aspetto e design sono soggetti a modifiche senza preavviso. PACKAGE LIST...
Page 32 MI*2 F*1 SOL*2 H*1 I*2 J*2 ASSEMBLY STEP PASSO 1 Prendi G e H ; Metti G su H. - 4 -...
Page 33 PASSO 2 Prendere A e B, togliere le viti di fissaggio J e serrare le viti con un cacciavite a croce. PASSO3 - 5 -...
Page 34 Tighten the hand screw. Take out the screw Prendi C, rimuovi la vite inferiore e fissala con la base in piastra di ferro nel passaggio 1, quindi blocca la vite manuale sulla parte in plastica della base. PASSO4 - 6 -...
Page 35 Prendi D (2 pezzi) e collegalo con C. PASSO5 - 7 -...
Page 36 Prendi la E e collegala alla D , allenta la vite manuale sull'asta telescopica del materiale 5 per regolare l'altezza appropriata e stringi la vite. PASSO6 - 8 -...
Page 37 Stato 1 Stato 2 Ci sono due modi per usarlo : Stato 1 : il proiettore è avvitato sulla staffa e il metodo di installazione prende I e lo avvita sulla parte superiore di E , quindi il proiettore viene installato e l'angolo può...
Page 38 COMPLETION - 10 -...
Page 39 Produttore: Shanghaimuxinmuyeyouxiangongsi Indirizzo: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN. Importato in Australia: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Importato negli Stati Uniti: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main. YH CONSULTING LIMITED.
Page 40 Tecnico Supporto e certificato di garanzia elettronica www.vevor.com/support...
Page 41 ELEVADOR DE PROYECTOR MOTORIZADO de USUARIO MODELO: ZG-TBTY We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 43 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
Page 44 SAFETY INSTRUCTIONS ADVERTENCIA: Lea este material antes de usar este producto. De lo contrario, se pueden producir lesiones graves. 25. Ensamble únicamente de acuerdo con estas instrucciones. Un montaje inadecuado puede crear peligros. 26. Use gafas de seguridad aprobadas por ANSI y guantes de trabajo resistentes durante el montaje.
Page 45 GUARDE ESTE MANUAL TECHNICAL SPECIFICATIONS Modelo ZG-TBTY Dimensiones del producto 300*400*1610 (LxAnxAl)(mm) Tamaño del embalaje (largo x ancho x alto) 440*340*120 (mm) Peso neto / kg) Alrededor de 3,6 Peso bruto (kg) Acerca de 4.4 *Productos como especificaciones, apariencia y diseño están sujetos a modificaciones sin previo aviso.
Page 46 E*2 F*1 G*2 Al*1 Yo*2 J*2 ASSEMBLY STEP PASO 1 Tome G y H ; Pon G en H. - 4 -...
Page 47 PASO 2 Tome A y B, saque los tornillos de ajuste J y apriételos con un destornillador Phillips. PASO 3 - 5 -...
Page 48 Tighten the hand screw. Take out the screw Tome C, saque el tornillo inferior y fíjelo con la base de la placa de hierro en el paso 1, y luego bloquee el tornillo manual en la parte plástica de la base.
Page 49 Tome D (2 piezas) y conéctelo con C. PASO 5 - 7 -...
Page 50 Tome la E y conéctela con la D , afloje el tornillo manual en la varilla telescópica del material 5 para ajustar la altura adecuada y apriete el tornillo. PASO 6 - 8 -...
Page 51 Estado 1 Estado 2 Hay dos formas de utilizarlo : Estado 1 : el proyector está atornillado al soporte, y el método de instalación toma I y lo atornilla en la parte superior de E , y luego se instala el proyector y se puede ajustar el ángulo;...
Page 52 COMPLETION - 10 -...
Page 53 Fabricante: Shanghaimuxinmuyeyouxiangongsi Dirección: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN. Importado a AUS: SIHAO PTY LTD. 1 ROKEVA STREET ASTWOOD NSW 2122 Australia Importado a EE. UU.: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main.
Page 54 Técnico Certificado de soporte y garantía electrónica www.vevor.com/support...
Page 55 ZMOTORYZOWANY PODNOŚNIK DO PROJEKTORA INSTRUKCJA obsługi MODEL: ZG-TBTY We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 57 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
Page 58 SAFETY INSTRUCTIONS OSTRZEŻENIE: Przeczytaj materiał przed użyciem tego produktu. Niezastosowanie się do tego może spowodować poważne obrażenia. 33. Montaż wyłącznie zgodnie z niniejszą instrukcją. Nieprawidłowy montaż może stworzyć zagrożenie. 34. Podczas montażu należy nosić okulary ochronne i wytrzymałe rękawice robocze zatwierdzone przez ANSI. 35.
Page 59 ZACHOWAJ TĘ INSTRUKCJĘ TECHNICAL SPECIFICATIONS Model ZG-TBTY wymiary produktu 300*400*1610 (DxSxW) (mm) Rozmiar opakowania (dł. 440*340*120 x szer. x wys.) (mm) Masa netto (kg) Około 3,6 Waga brutto (kg) Około 4,4 *Produkty takie jak dane techniczne, wygląd i konstrukcja mogą...
Page 60 Ja*2J*2 ASSEMBLY STEP KROK 1 Weź G i H ; Postaw G na H. - 4 -...
Page 61 KROK 2 Weź A i B, wyjmij śruby mocujące J i dokręć śruby śrubokrętem krzyżakowym. KROK 3 - 5 -...
Page 62 Tighten the hand screw. Take out the screw Weź C, wyjmij dolną śrubę i przymocuj ją do podstawy z żelaznej płyty w kroku 1, a następnie zablokuj śrubę ręczną na plastikowej części podstawy. KROK 4 - 6 -...
Page 63 Weź D (2 sztuki) i połącz je z C. KROK 5 - 7 -...
Page 64 Weź E i połącz je z D , poluzuj śrubę ręczną na drążku teleskopowym z materiału 5, aby wyregulować odpowiednią wysokość, i dokręć śrubę. KROK 6 - 8 -...
Page 65 Stan 1 Stan 2 Można go używać na dwa sposoby : Stan 1 : projektor jest przykręcony do wspornika, a metoda instalacji polega na przykręceniu I i przykręceniu go do górnej części E , a następnie projektor jest instalowany i można regulować kąt; Stan 2 : Projektor jest umieszczony na tacy.
Page 66 COMPLETION - 10 -...
Page 67 Producent: Shanghaimuxinmuyeyouxiangongsi Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, szanghaj 200000 CN. Import do AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Import do USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main. YH CONSULTING LIMITED.
Page 68 Techniczny Certyfikat wsparcia i e-gwarancji www.vevor.com/support...
Page 69 GEMOTORISEERDE PROJECTORLIFT Handleiding MODEL: ZG-TBTY We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 71 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
Page 72 SAFETY INSTRUCTIONS WAARSCHUWING: Lees dit materiaal voordat u dit product gebruikt. Als u dit niet doet, kan dit leiden tot ernstig letsel. 41. Monteer uitsluitend volgens deze instructies. Onjuiste montage kan gevaren veroorzaken. 42. Draag tijdens de montage een ANSI-goedgekeurde veiligheidsbril en stevige werkhandschoenen.
Page 73 BEWAAR DEZE HANDLEIDING TECHNICAL SPECIFICATIONS Model ZG-TBTY Productafmetingen 300*400*1610 (LxBxH)(mm) Verpakkingsgrootte 440*340*120 (LxBxH) (mm) Netto gewicht / kg) Ongeveer 3,6 Bruto gewicht (kg) Ongeveer 4.4 *Producten zoals specificaties, uiterlijk en ontwerp kunnen zonder voorafgaande kennisgeving worden gewijzigd. PACKAGE LIST...
Page 74 E*2 V*1 G*2 H*1 I*2 J*2 ASSEMBLY STEP STAP 1 Neem G en H ; Zet G op H. - 4 -...
Page 75 STAP 2 Neem A en B, verwijder de bevestigingsschroeven J en draai de schroeven vast met een kruiskopschroevendraaier. STAP 3 - 5 -...
Page 76 Tighten the hand screw. Take out the screw Neem C, verwijder de onderste schroef en bevestig deze met de ijzeren plaatbasis in stap 1, en vergrendel vervolgens de handschroef op het plastic deel van de basis. STAP 4 - 6 -...
Page 77 Neem D (2 stuks) en verbind deze met C. STAP 5 - 7 -...
Page 78 Neem de E en verbind deze met de D , draai de handschroef op de telescopische stang van het materiaal 5 los om de juiste hoogte aan te passen, en draai de schroef vast. STAP6 - 8 -...
Page 79 Staat 1 Staat 2 Er zijn twee manieren om het te gebruiken : Staat 1 : de projector wordt op de beugel geschroefd, en de installatiemethode neemt I en schroeft deze op de bovenkant van E , en dan wordt de projector geïnstalleerd en kan de hoek worden aangepast; Staat 2 : De projector wordt op de lade geplaatst.
Page 80 COMPLETION - 10 -...
Page 81 Fabrikant: Shanghaimuxinmuyeyouxiangongsi Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN. Geïmporteerd naar AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australië Geïmporteerd naar de VS: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main. YH CONSULTING LIMITED.
Page 82 Technisch Ondersteuning en e-garantiecertificaat www.vevor.com/support...
Page 83 MOTORISERAD PROJEKTORLYFT Användarmanual MODELL: ZG-TBTY We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 85 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
Page 86 SAFETY INSTRUCTIONS VARNING: Läs detta material innan du använder denna produkt. Underlåtenhet att göra det kan resultera i allvarliga skador. 49. Montera endast enligt dessa instruktioner. Felaktig montering kan skapa faror. 50. Använd ANSI-godkända skyddsglasögon och kraftiga arbetshandskar vid montering. 51.
Page 87 SPARA DENNA MANUAL TECHNICAL SPECIFICATIONS Modell ZG-TBTY Produktens mått 300*400*1610 (LxBxH)(mm) Förpackningsstorlek(LxB 440*340*120 xH)(mm) Nettovikt (kg) Cirka 3,6 Bruttovikt (kg) Cirka 4,4 *Produkter som specifikationer, utseende och design kan ändras utan föregående meddelande. PACKAGE LIST A*1 B*1 C*1 D*2 E*2 F*1 G*2 H*1...
Page 88 I*2 J*2 ASSEMBLY STEP STEG 1 Ta G och H ; Sätt G på H. - 4 -...
Page 89 STEG 2 Ta A och B, ta ut monteringsskruvarna J och dra åt skruvarna med en stjärnskruvmejsel. STEG 3 Tighten the hand screw. Take out the screw - 5 -...
Page 90 Ta C, ta ut den nedre skruven och fixera den med järnplattans bas i steg 1, och lås sedan handskruven på plastdelen av basen. STEG 4 Ta D (2 stycken) och anslut den med C. - 6 -...
Page 91 STEG 5 Ta E och anslut den till D , lossa handskruven på materialets teleskopstång 5 för att justera lämplig höjd och dra åt skruven. - 7 -...
Page 92 STEG 6 Tillstånd 1 Tillstånd 2 Det finns två sätt att använda det : Tillstånd 1 : projektorn skruvas på fästet, och installationsmetoden tar I och skruvar den på toppen av E , och sedan installeras projektorn och vinkeln kan justeras; - 8 -...
Page 93 Tillstånd 2 : Projektorn är placerad på facket. Installationsmetoden tar F och skruvar fast den i toppen av E . Sedan fixeras brickan som installerades i steg 1 på materialet 6 och projektorn placeras. COMPLETION - 9 -...
Page 94 Tillverkare: Shanghaimuxinmuyeyouxiangongsi Adress: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN. Importerad till AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australien Importerad till USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main. YH CONSULTING LIMITED.
Page 95 Teknisk Support och e-garanticertifikat www.vevor.com/support...
Page 96 ASCENSEUR DE PROJECTEUR MOTORISÉ MANUEL DE l' Utilisateur MODÈLE: ZG-TBTY We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 98 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
Page 99 SAFETY INSTRUCTIONS AVERTISSEMENT: Lisez ce document avant d'utiliser ce produit. Ne pas le faire peut entraîner des blessures graves. 57. Assemblez uniquement selon ces instructions. Un assemblage incorrect peut créer des dangers. 58. Portez des lunettes de sécurité approuvées par l'ANSI et des gants de travail robustes pendant l'assemblage.
Page 100 élévateur de projecteur motorisé entièrement chargé . 47. Utiliser uniquement comme prévu. 48. Inspectez avant chaque utilisation ; ne pas utiliser si les pièces sont desserrées ou endommagées. CONSERVEZ CE MANUEL TECHNICAL SPECIFICATIONS Modèle ZG-TBTY dimensions du produit 300*400*1610 (LxlxH)(mm) Taille de l'emballage 440*340*120 (LxlxH)(mm)
Page 101 E*2 F*1 V*2 H*1 Je*2 J*2 ASSEMBLY STEP ÉTAPE 1 - 4 -...
Page 102 Prenez G et H ; Mettez G sur H. ÉTAPE 2 Prenez A et B, retirez les vis de montage J et serrez les vis avec un tournevis cruciforme. ÉTAPE 3 - 5 -...
Page 103 Tighten the hand screw. Take out the screw Prenez C, retirez la vis inférieure et fixez-la avec la base en plaque de fer à l'étape 1, puis verrouillez la vis manuelle sur la partie en plastique de la base. ÉTAPE 4 - 6 -...
Page 104 Prenez D (2 pièces) et connectez-le avec C. ÉTAPE5 - 7 -...
Page 105 Prenez le E et connectez-le au D , desserrez la vis à main sur la tige télescopique du matériau 5 pour régler la hauteur appropriée, et serrez la vis. ÉTAPE6 - 8 -...
Page 106 État 1 État 2 Il y a deux manières de l'utiliser : État 1 : le projecteur est vissé sur le support, et la méthode d'installation prend I et le visse sur le dessus de E , puis le projecteur est installé et l'angle peut être ajusté...
Page 107 COMPLETION - 10 -...
Page 108 Fabricant : Shanghaimuxinmuyeyouxiangongsi Adresse : Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN. Importé en Australie : SIHAO PTY LTD. 1 ROKEVA STREETASTWOOD NSW 2122 Australie Importé aux États-Unis : Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main.
Page 109 Technique Assistance et certificat de garantie électronique www.vevor.com/support...

VEVOR ZG-TBTY User Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for VEVOR ZG-TBTY

Summary of Contents for VEVOR ZG-TBTY