Subscribe to Our Youtube Channel
Related Manuals for Mcombo 7893
Summary of Contents for Mcombo 7893
- Page 1 OWNER'S MANUAL LIFT RECLINER 7893/7679/7680 www.mcombo.com / sales@mcombo.com NEWACME LLC mcombo.com amazon.com/mcombo...
- Page 2 SUPPORT shields or other safety features of this product. • Fabric Care You will not refuse or neglect any retrofit kits that MCombo may provide to enhance • Faux Leather Care and preserve the safe use of this product. • Electronics Care •...
- Page 3 • Do not use pillow, blanket, or other cover between occupant and chair surface when heat is engaged. • Do not a�empt to disconnect the power plug by pulling the power cord. Always hold the power Read the safety and other instruc�ons thoroughly before using your MCombo® product. Failure to plug and pull it out.
- Page 4 7.5W Power ( Single ) unsafe use of the MCombo Product. We specifically disclaim responsibility for any bodily injury or property damage that may occur during any use that does not comply with applicable federal, state, or local laws or ordinances.
- Page 5 • The chair is delivered in MULTIPLE boxes. Please check if you have received all parts of the chair. 1. Place the An�-back-�pping parts (G) near the bo�om of base. • Use MCombo parts only for all replacements. 2. Align the screws with the holes then �ghten the wing screws (Figure).
- Page 6 Step2 - Armrest Assembly Step3 - Backrest Assembly 1. Ensure the armrest which has USB charge port is located on right of base. 1. Align the brackets of backrest at the clips of seat-back (Figure). 2. Slide the le� and right armrest into the brackets of the base. 2.
- Page 7 Step4 - Li� Connec�ons 1. Before a�aching the li� remote and massage remote to the base, please get wires through the side loops of either side armrest according to the user's preference. Step5 - Final Check 1. Make sure both metal brackets on each armrest are mounted on the base. (There are two metal brackets on each side of the base, it looks like assembly finished when you insert armrest into only one bracket instead of two, however all pressure will apply to one bracket, that is one likely reason that the armrest fall apart from the seat.)
- Page 8 You need to calibrate the control box: 1. If you press the HOME bu�on and the chair does not and contact the MCombo Customer Support immediately. To avoid personal injury and/or product return to its upright posi�on. damage, do not plug the unit into the electrical outlet un�l the problem is corrected and do not 2.
- Page 9 IV. CARE AND MAINTENANCE Massage Remote Opera�on Instruc�on Your MCombo product will provide years of superior performance and sa�sfac�on with regular care and maintenance. To maintain the finish quality of your "assistant", please follow the guidelines and cleaning procedures provided below.
- Page 10 ● Check electrical components frequently for signs of corrosion and replace as necessary. ● Contact MCombo Customer Support if damage is present, do not fix it by yourself. • Make sure the light of the massage remote is on.
- Page 11 • If there is a burning smell, unplug the remote and contact MCombo support to replacement. NOTE: If the li� recliner s�ll does not operate properly, please contact the MCombo® Customer Support for help and never a�empt to make any repairs or adjustments yourself.
- Page 12 Step3 - Remove Bolts Step4 - Replace the New Li� Motor Insert bolts and paper clips at both ends of the li� motor. ( 1 ) The original posi�on ( 2 ) Twist the of the paper clip paper clip ( 3 ) Pull out the paper clip (1) Insert the bolt (2) Insert the paper clip...
- Page 13 Step5 - Plug in the Wire of Li� Motor Step6 - Final Check NOTE: Please make sure all wires are not been crushed or pulled. Check & Confirm 1.Make sure bolts and paper clips are fully inserted. 2.Make sure the li� motor is installed in the correct direc�on. 3.Make sure the wires are not crushed by the seat frame.
- Page 14 VI. DISASSEMBLY INSTRUCTION Step3 - Disassemble Armrests NOTE: No�ce • Need to remove the backrest first. • It is best to remove armrest by two people. • Ensure the chair is in seated posi�on and its footrest return to original posi�on. •...
- Page 15 • If you have any problem to return the product, please contact us immediately, we will do our best to MCOMBO® will pay standard shipping rates on all warranted parts for the first year. We can also sell you replacement part for a discount price when your product is out of warranty policy.
- Page 16 IX. MCOMBO CUSTOMER SUPPORT If for any reason, we have fallen short of your expecta�ons, or if you have any ques�ons and suggests, please refer to the following contact informa�on, we will do our best to work with you to make sure you are en�rely sa�sfied.
Need help?
Do you have a question about the 7893 and is the answer not in the manual?
Questions and answers