Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for INDUSTRY POLAR Series
- Page 1 COAST INSTALLATION AND OPERATING INSTRUCTIONS...
- Page 2 POLAR series furnaces are economical and highly efficient heaters designed for heating residential and industrial premises, maintenance centres, workshops and garages, greenhouses, sheds, etc. In addition, furnaces are well suited for the permanent heating of spaces and for spaces that are used temporarily and intermittently.
- Page 3 Gas regulator Frame The heating furnace (POLAR series) is an economical and highly Secondary chamber efficient heating appliance that uses solid fuel. Its main operating mode is glow combustion (wood gas generator principle).
- Page 4 Such a furnace has a two-chambered combustor in which the glow SAFETY REQUIREMENTS combustion method (based on the "wood gas generator" principle) NOTE! To ensure the safe installation and use of the appliance, the involves two stages: combustion of the fuel and afterburning of the flue requirements and recommendations given in this manual and the gases.
- Page 5 The metallic forge shall be installed at least 1 m from structures made be sufficient to heat a thick brick structure over the entire height of the of materials of flammability classes G3, G4 and at least 0,7 m from chimney.
- Page 6 This is why we recommend a bellows made of heat and acid resistant Insulated pipe stainless steel DIN 1.4571 / 1.4404. Such a baffle has a small thickness, heats up very quickly, has a surface for the mirror to which nothing sticks, and is not damaged by exposure to Thermal strong acidic condensate.
- Page 7 Insulated pipe The space between the flues and roof structures made of combustible or flammable materials shall be covered with non-combustible roofing Clamp materials. If the chimney passes through the roof, a corresponding notch must be made in Isolole rimata T- Figure 7.
- Page 8 NOTE! The stove is painted with a heat-resistant silicone enamel paint which only fully polymerises during the first heating of the stove and gives off a specific smell which disappears afterwards. For this reason, the stove should be heated for the first time in a properly ventilated room with fully open doors and windows or outdoors.
- Page 9 Do not use the stove while: – leave the stove unattended or under the supervision of children; – place fuel and other combustible substances and materials directly in front of the oven door opening; – store unquenched charcoal and ash in metal containers placed on a wooden floor or a base of combustible material;...
- Page 10 Reasons Method of elimination ERRORS External manifestations Stove does not heat, Insufficient height of the chimney. Install the e chimney according smoke, no draft to Table 1, point 3. Lack of thermal insulation on the outer parts of the chimney. Isolate bellows compartments outside the The chimney becomes clogged with soot...
Need help?
Do you have a question about the POLAR Series and is the answer not in the manual?
Questions and answers