Seitz Roundshot VR Drive full Instruction Manual

page of 101

/ 101
Bookmarks

Quick Links

Download this manual

Roundshot VR Drive – generation 2

Software release: version 1.0 (May 2011)

Instruction Manual Roundshot VR Drive - version 4.0 – January 2010 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch

page 0

Need help?

Do you have a question about the Roundshot VR Drive full and is the answer not in the manual?

Questions and answers

Summary of Contents for Seitz Roundshot VR Drive full

Page 1 Roundshot VR Drive – generation 2 Software release: version 1.0 (May 2011) Instruction Manual Roundshot VR Drive - version 4.0 – January 2010 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 0...
Page 2 Instruction Manual Roundshot VR Drive - version 4.0 – January 2010 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 1...
Page 3 Software update: “Club VR Drive” Upgrades: Adding new software modes Return of equipment / recycling Frequently asked questions 6. Technical Data Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 2...
Page 4 For example, it is possible to purchase the y-motor with connection cable to transform the VR Drive from “semi” to “full”. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 3...
Page 5 VR bracket lock Ethernet VR bracket nodal rail Socket for nodal rail clamp radio control unit (receiver) Bedienungsanleitung Roundshot VR Drive - Version 1.0 – Mai 2011 - © by Seitz Phototechnik AG / Schweiz www.roundshot.ch Seite 4...
Page 6 • attaching/removing y-motor to VR bracket • locking/releasing VR Drive x-motor on tripod Allen key 3/16’’ for removing/attaching or fine-tuning y-motor clamp Bedienungsanleitung Roundshot VR Drive - Version 1.0 – Mai 2011 - © by Seitz Phototechnik AG / Schweiz www.roundshot.ch Seite 5...
Page 7 (also very slow), pause, repeat, delay and ramp (acceleration). Bedienungsanleitung Roundshot VR Drive - Version 1.0 – Mai 2011 - © by Seitz Phototechnik AG / Schweiz www.roundshot.ch Seite 6...
Page 8 Additional nodal rail (for longer lenses) Clamp for manual tilting Additional spirit level Radio release unit Additional universal charger (110-220V) Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 7...
Page 9 Additional camera release cables (please check our website for list of compatible cameras) Extension cable (2m) for turntable Turntable Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 8...
Page 10 VR bracket VR Drive with VR Drive y-motor (or motor nodal rail clamp) and nodal rail Universal charger (110-220V) Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 9...
Page 11 Do not turn the VR bracket, when the quick adaptor is locked. Due to the high leverage the VR Drive motor and the gears can be damaged. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 10...
Page 12 Connect the other end of the into the VR Drive x-motor. cable into the VR Drive y-motor (front or rear). Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 11...
Page 13 Check that the rear of the camera is mounted straight at exactly 90° with the nodal rail: wrong correct Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 12...
Page 14 (A) or by fine- tuning the nodal rail clamp (B). Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 13...
Page 15 . Push it tightly into the the VR Drive x-motor socket. Your VR Drive “full” is now ready. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 14...
Page 16 Your VR Drive “semi” is now ready. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 15...
Page 17 Hold the turntable with the allen key without turning the allen key. Attach the 3/8’’ thread. Attach the quick adaptor. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 16...
Page 18 It is possible to use several 2m extension cables. Your VR Drive “turntable” is now ready. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 17...
Page 19 (cylindrical), especially from centre of VR Drive for -90° image with large cameras and heavy lenses (spherical panorama) Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 18...
Page 20 It is then possible to attach the VR Drive y- motor directly on the lower VR bracket using by loosening the two screws below. the two screws. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 19...
Page 21 VR Drive. connector pins as they are fragile. It does not have to be removed. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 20...
Page 22 This will synchronise the radio middle of the radio receiver. signal between sender and receiver. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 21...
Page 23 (no or yes). Please consult the settings menu for further information on these two functions. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 22...
Page 24 This is especially relevant when using the VR Drive “speed” mode. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 23...
Page 25 Click on an entry field to activate it. Confirm the entries with the “next” button. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 24...
Page 26 “quality” and “speed” modes. For the “turntable” and “video” modes the camera type is used for information only and has no computation purpose. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 25...
Page 27 The battery charge and the current time are displayed with their respective icons. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 26...
Page 28 For more information about the “program edit” menu please refer to chapter 4. Return to the “home menu” by clicking “X” (cancel). Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 27...
Page 29 The following is an overview of the VR Drive navigation: Program management Program Wizard Start-up Home Program edit Program info expand / collapse Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 28...
Page 30 It may be helpful to use a pen or other sharp item when using the keyboard. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 29...
Page 31 Be careful not to hand between camera and squeeze your hand in the y-motor. moving VR Drive vertical arm. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 30...
Page 32 0° position after confirming with “next”. For VR Drive “semi” lift the camera manually back up into the 0° position. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 31...
Page 33 There is a simple practical procedure to determine the nodal point: Open the quick adaptor release so that the VR bracket and camera can be moved sideways: Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 32...
Page 34 If the distance between the two lines remains constant, the camera is in the correct nodal point. Close the quick adaptor release. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 33...
Page 35 – larger – nodal bench rail for long lenses and attach the camera always at the very rear metal base. This avoids any potential error when using different cameras/lenses. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 34...
Page 36 As a next step enter the horizontal angle (“X”) of the panorama. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 35...
Page 37 For cylindrical single-row panoramas the overlap is uniform. Therefore the stitching will work with less overlap. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 36...
Page 38 Click on a row and select “delete” to remove the row from the list. Modify the desired elevation in degrees and the number of images per row. Confirm with “next”. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 37...
Page 39 If none of the 8 sequence presets are ideal, use the “manual” angle mode. In this mode the rows (elevation in °, number of images) and their sequence can be customised. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 38...
Page 40 Increase the horizontal and vertical overlap and/or increase the number of images per row. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 39...
Page 41 This is why the overlap for spherical panoramas needs to be larger. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 40...
Page 42 Modify the desired elevation in degrees and the number of images per row. Click on a row and select “delete” to remove the row from the list. Confirm with “next”. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 41...
Page 43 Increase the horizontal and vertical overlap and/or increase the number of images per row. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 42...
Page 44 A first default row is displayed. Click on a row to modify the elevation and number of images for this row. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 43...
Page 45 Modify the desired elevation in degrees and the number of images per row. Click on a row and select “delete” to remove the row from the list. Confirm with “next”. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 44...
Page 46 Increase the horizontal and vertical overlap and/or increase the number of images per row. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 45...
Page 47 Therefore please refer to the “Program Wizard Quality Mode” for a step-by-step guide in setting up the program. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 46...
Page 48 • Reduce the rotation speed Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 47...
Page 49 CF storage card. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 48...
Page 50 It may be helpful to use a pen or other sharp item when using the keyboard. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 49...
Page 51 For an object movie that turns seamlessly around its axis enter “360°”. Finally enter the number of images to be released within the “X” angle. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 50...
Page 52 If one or several of these parameters need to be changed, they can be accessed in the “program edit” menu. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 51...
Page 53 It may be helpful to use a pen or other sharp item when using the keyboard. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 52...
Page 54 Important: do not confirm the X/Y coordinates with the “next” button as this will save the program and continues to the “home” menu. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 53...
Page 55 Then continue to acquire as many points as the video sweep requires, for example: When the point acquisition is finished, confirm with “next”. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 54...
Page 56 Before going on assignment, always run a test to see if the program delivers the intended video sweep. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 55...
Page 57 The VR Drive will return to its initial position and the software displays the “home” menu with the currently active program. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 56...
Page 58 (P1, P2, …). Before deleting the program the program asks for confirmation. Cancel with “X”. Confirm with “OK”. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 57...
Page 59 “7” – all subsequent programs will move one number down, so the previous “P7” will now become “P8”. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 58...
Page 60 This is why it is not possible to switch to “Turntable” or “Video” mode from “Quality” mode. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 59...
Page 61 Confirm the choice of camera with “X”. The rows (elevation, number of images) will now be automatically recalculated. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 60...
Page 62 Confirm with “OK” or cancel with “X”. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 61...
Page 63 In angle mode “manual” the change of camera has no consequences. Here the rows must be edited manually. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 62...
Page 64 Confirm with “OK” or cancel with “X”. The rows (elevation, number of images) will now be automatically recalculated. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 63...
Page 65 Confirm with “OK” or cancel with “X”. The rows (elevation, number of images) will now be automatically recalculated. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 64...
Page 66 Enter the desired elevation in degrees and the number of images per row. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 65...
Page 67 Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 66...
Page 68 Click on “pause” to change the pause before or after image-taking. The pause before/after image-taking is used to minimise potential vibrations. Confirm with “OK” or cancel with “X”. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 67...
Page 69 The acceleration values range from 1% (slow speed adaptation) to 100% (fast speed adaptation). Confirm with “OK” or cancel with “X”. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 68...
Page 70 • Manual “on”: requires releasing every picture manually • Manual “off”: releases the images automatically Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 69...
Page 71 Click on “orientation” to change the direction in which the VR Drive turns. • Orientation“CW”: rotates clockwise • Orientation“CCW”: rotates anti-clockwise Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 70...
Page 72 “Program Wizard”. Enter the “X” and “Y” coordinates of the starting point. Confirm with “OK”. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 71...
Page 73 • Acceleration • Pause • Images For example, change the X/Y coordinates of a point. Confirm with “OK”. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 72...
Page 74 The “video” mode can be used for time-lapse sweeps using individual images instead of video. The camera can be moved 180x360° and triggered in any X/Y position. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 73...
Page 75 Please note that the language will only be active after closing the “edit program” menu or after restarting the VR Drive. Confirm with “X”. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 74...
Page 76 For extended operation times the auto turn off time can be increased. Enter the time in minutes. Confirm with “next” or cancel with “X”. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 75...
Page 77 Click on “software” to display information on the software software This function consists of • key • version • IP Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 76...
Page 78 This IP must be in the same range as the computer connecting to the VR Drive. Confirm with “OK” or cancel with “X”. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 77...
Page 79 For example, to tilt the camera 90° down (for transport), enter: • X: 0° (or any value) • Y: -90° Confirm with “OK” or cancel with “X”. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 78...
Page 80 Drive is moved with the remote radio release or with the touch screen unit for point definition (video mode). Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 79...
Page 81 Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 80...
Page 82 VR Drive. Add a new camera by clicking the button. For example for Nikon D700: Nikon Nikon D700 Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 81...
Page 83 To delete a camera from the list, select the camera and click delete The camera will still be in the database, but removed from the “favourites” list. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 82...
Page 84 The camera parameters are displayed as follows: Enter the camera brand, camera type, X/Y (mm) and X/Y (pixel). Confirm with “OK”. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 83...
Page 85 The table on the following page summarises all program parameters created in the “Wizard” and loaded as “presets” for the different VR Drive modes. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 84...
Page 86 Bracketing    Manual   Mirror prerelease    Orientation  Start position  Points Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 85...
Page 87 (degree of speed adaptation), pause at seconds, images every point, release of images between points Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 86...
Page 88 “P1”. The settings (general (time settings etc.) and database (camera, presets) will be created from factory settings. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 87...
Page 89 The Li-Ion batteries do not have to be drained – they have no memory effect. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 88...
Page 90 Check the touch precision (cross). If OK, confirm with “OK”. If not, repeat the test by clicking “repeat”. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 89...
Page 91 International Warranty Your Roundshot VR Drive is covered by the international 2-year Seitz warranty. The warranty is linked to the hardware ID (serial number) and is stored in our database. If there is any malfunction or defect of the equipment we will repair the VR Drive at no cost.
Page 92 „Club VR Drive“ Roundshot VR Drive 1876B9173F924AA Roundshot VR Drive instruction manual Roundshot VR Drive Bedienungsanleitung >>> VR Drive Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 91...
Page 93 Roundshot icon appears. This confirms that the VR Drive is now in software update mode. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 92...
Page 94 This is confirmed with the start-up screen. The software updates are now complete. It is now safe to remove the USB stick. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 93...
Page 95 Upgrades: Adding new software modes Software upgrades can be ordered after initial purchase of your VR Drive. They can be ordered from your distributor or directly from Seitz Roundshot on our website www.roundshot.ch. Once your purchase is confirmed, we will send you a 16-digit key which is linked to the unique hardware ID (serial number) of your VR Drive.
Page 96 We wish you continued success and fun with your Roundshot VR Drive! Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 95...
Page 97 “Club VR Drive”. It is then possible to update the factory list of cameras by a software update. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 96...
Page 98 Roundshot e-shop. We will then send you a new software key to activate the new mode(s). Please follow the instructions in section 5.6 Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 97...
Page 99 6. Technical Data Technical changes reserved. Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 98...
Page 100 Instruction Manual Roundshot VR Drive - version 4.0 – January 2010 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 99...
Page 101 8512 Lustdorf / Switzerland ph: +41 52 376 33 53 email: seitz@roundshot.ch www.roundshot.ch Technical changes reserved May 2011 Instruction Manual Roundshot VR Drive - version 1.0 – May 2011 - © by Seitz Phototechnik AG / Switzerland www.roundshot.ch page 100...

This manual is also suitable for:

Roundshot vr drive semiRoundshot vr drive baseRoundshot vr drive turntable