TKH CEDD AGL System Instructions

Hide thumbs

page of 47

/ 47
Bookmarks

Quick Links

Download this manual

System Instructions

CEDD AGL

CEDD AGL System

Airfield Ground Lighting

03-70079

V1.1

Need help?

Do you have a question about the CEDD AGL and is the answer not in the manual?

Questions and answers

Summary of Contents for TKH CEDD AGL

Page 1 System Instructions CEDD AGL CEDD AGL System 03-70079 Airfield Ground Lighting V1.1...
Page 2 TKH Airport Solutions 2024 All rights reserved for TKH Airport Solutions. No part of this publication may be reproduced, modified, stored in a retrieval system, or transmitted, by any means or in any form without the written permission of the copyright owner.
Page 3 5.9 Power Up the CEDD HPS Basestation....................22 5.10 Update Configuration.........................22 5.11 Set Basestation in Idle........................24 5.12 Validate.............................. 24 5.13 After-Service............................25 System Instructions - CEDD AGL © TKH Airport Solutions 2024. All rights reserved. All specifications subject to change without notice.
Page 4 8.2 Status screen............................44 8.3 Switch group screen..........................45 8.4 Connection lost screen........................45 8.5 Setting the control mode........................45 8.6 Local control............................46 System Instructions - CEDD AGL © TKH Airport Solutions 2024. All rights reserved. All specifications subject to change without notice.
Page 5 TKH Airport Solutions reserves the right to revise this document without notification. The data provided in this document is based on the most recent information at the time of publication. TKH Airport Solutions is continually seeking to ensure that its products are developed to the latest technological standards.
Page 6 The safety of any system incorporating the CEDD AGL is the responsibility of any site installation, commissioning, maintenance and operational personnel using the system.
Page 7 : 05_CEDD_AGL_System_Instructions_03-70079 Version : V1.1 Language : English (Original manual) For the latest version of this document see https://www.tkh-airportsolutions.com/airfield-products/ or scan System Instructions - CEDD AGL © TKH Airport Solutions 2024. All rights reserved. All specifications subject to change without notice.
Page 8 When performing installation, maintenance or service activities, always carry out these activities with the greatest caution to avoid injuries or damage to the CEDD AGL system. All activities may only be performed by qualified and authorized personnel (see below). It is the responsibility of those in charge of preparing and/ or supervising such work to take the necessary actions to ensure safe working conditions.
Page 9 The CEDD AGL System may only be used with CEDD system components approved by TKH Airport Solutions: • CEDD HPS Basestation • CEDD HPS Terminator • CEDD cable • CEDD nodes, such as LED Fixtures • CEDD Master CMS •...
Page 10 Basestation. Each fixture is connected to the CEDD cable without galvanic contact. A CEDD AGL System consists of a CEDD Master, and multiple CEDD HPS Basestations powering the fixtures. The CEDD Master includes 2 functional units: the CEDD Master CMS controls the CEDD AGL System and the CEDD Master AM is used to configure the system.
Page 11 Inspect the quality of the replacement product. See the relevant Installation and Maintenance Manual for the product type, Chapter 4 Inspection. System Instructions - CEDD AGL © TKH Airport Solutions 2024. All rights reserved. All specifications subject to change without notice.
Page 12 If you need to replace the fixture, record the NUID of the old fixture (see the QR-code on the sticker on the fixture or elevated base). System Instructions - CEDD AGL © TKH Airport Solutions 2024. All rights reserved. All specifications subject to change without notice.
Page 13 CEDD Master AM menu: select System mode and check that mode is Idle. Change System mode to Maintenance and click Apply. System Instructions - CEDD AGL © TKH Airport Solutions 2024. All rights reserved. All specifications subject to change without notice.
Page 14 Check that the details are correct and click Rollout changes. Wait approximately 1 minute to give the system time to roll out the configuration. System Instructions - CEDD AGL © TKH Airport Solutions 2024. All rights reserved. All specifications subject to change without notice.
Page 15 Log out of CEDD Master AM. 4.12 Validate You can perform validation using either the ALCMS or the TKH Airport Solutions application (CEDD Control). Whichever application you use, you must briefly set the intensity of the lamp to 100%. This will verify whether the inductive clamp on the fixture is properly closed Never look directly into the light source while the power is at full intensity.
Page 16 Follow the procedures in the service level agreement or warranty statement, as applicable. Some common procedures are described below. Reporting Report to TKH Airport Solutions with details of quality issues and any problems with the old fixture. In the report include: •...
Page 17 Refer to the relevant Installation and Maintenance manual for the fixture for instructions on what to do with the old product.: • Chapter 7 Corrective Maintenance • Chapter 9 Taking out of Service, System Instructions - CEDD AGL © TKH Airport Solutions 2024. All rights reserved. All specifications subject to change without notice.
Page 18 For CEDD inset fixtures and CEDD elevated bases that require repair or disposal, return to TKH Airport Solutions in the original packaging (Contact TKH Airport Solutions Customer Service for the correct address.) For CEDD elevated fixtures see the relevant Installation and and Maintenance manual for maintenance instructions that can be performed in the airfield workshop.
Page 19 CEDD elevated fixture mounted on a CEDD Elevated Base. From software version Maxwell 3 onwards, it is possible to replace a fixture while the CEDD AGL system is still operational. Only the affected basestation has to be switched to maintenance mode.
Page 20 AGL functions or sections, according to local safety regulations and protocols. Set Basestation in Idle Ensure the CEDD AGL system is up and running and in operational mode Via the ALCMS/CEDD Control, switch the basestation(s) you want to replace fixtures from in 'idle' mode.
Page 21 If you need to replace the fixture, record the NUID of the old fixture (see the QR-code on the sticker on the fixture or elevated base). System Instructions - CEDD AGL © TKH Airport Solutions 2024. All rights reserved. All specifications subject to change without notice.
Page 22 On the Client or service laptop, log in to CEDD Master AM web interface. Navigate to the menu: Configuration > Replace Basestations and Nodes. Click Add Fixture replacement. System Instructions - CEDD AGL © TKH Airport Solutions 2024. All rights reserved. All specifications subject to change without notice.
Page 23 Click Apply. Check the list. If all BUID are filled in correctly, click Rollout changes. System Instructions - CEDD AGL © TKH Airport Solutions 2024. All rights reserved. All specifications subject to change without notice.
Page 24 The system should be fully back operational. 5.12 Validate You can perform validation using either the ALCMS or the TKH Airport Solutions application (CEDD Control). Whichever application you use, you must briefly set the intensity of the lamp to 100%.
Page 25 Follow the procedures in the service level agreement or warranty statement, as applicable. Some common procedures are described below. Reporting Report to TKH Airport Solutions with details of quality issues and any problems with the old fixture. In the report include: System Instructions - CEDD AGL ©...
Page 26 Log in to CEDD Master AM. Click Reporting > Data Download. Select the data dump for the relevant time period, and click Download. System Instructions - CEDD AGL © TKH Airport Solutions 2024. All rights reserved. All specifications subject to change without notice.
Page 27 Chapter 7 Corrective Maintenance • Chapter 9 Taking out of Service, For CEDD inset fixtures and CEDD elevated bases that require repair or disposal, return to TKH Airport Solutions in the original packaging (Contact TKH Airport Solutions Customer Service for the correct address.) For CEDD elevated fixtures see the relevant Installation and and Maintenance manual for maintenance instructions that can be performed in the airfield workshop.
Page 28 Check that there is a suitable replacement product in stock. The replacement CEDD HPS Basestation should be configured for your CEDD AGL system. If not, order a replacement product. Inspect the quality of the replacement product. See the CEDD HPS Basestation Installation and Maintenance Manual, Chapter 4 Inspection.
Page 29 Connect the wires in this order: Earth wire Cable connectors to Power AC mains in and Logic AC mains in Network cables CEDD cables System Instructions - CEDD AGL © TKH Airport Solutions 2024. All rights reserved. All specifications subject to change without notice.
Page 30 Change System mode to Maintenance and click Apply. 6.10 Update Configuration CEDD Master AM menu: Configuration > Replace Basestations and Nodes. Click Add Basestation replacement. System Instructions - CEDD AGL © TKH Airport Solutions 2024. All rights reserved. All specifications subject to change without notice.
Page 31 This involves a system reboot of the CEDD Master CMS and CEDD HPS Basestation. Log out of CEDD Master AM. System Instructions - CEDD AGL © TKH Airport Solutions 2024. All rights reserved. All specifications subject to change without notice.
Page 32 6.12 Validate You can perform validation using either the ALCMS or the TKH Airport Solutions application (CEDD Control). Verify the status of the CEDD HPS Basestation in CEDD Master CMS using CEDD Control: Start CEDD Control. Select the correct interface, CEDD Master CMS IP address, and port number. In most cases the correct interface is ACIEM with port number 7484.
Page 33 Follow the procedures in the service level agreement or warranty statement, as applicable. Some common procedures are described below. Reporting Report to TKH Airport Solutions with details of quality issues and any problems with the old CEDD HPS Basestation. In the report include: •...
Page 34 Chapter 7 Corrective Maintenance • Chapter 9 Taking out of Service For a CEDD HPS Basestation that requires repair or disposal, pack it and return to TKH Airport Solutions. (Contact TKH Airport Solutions Customer Service for the correct address.) Check spares stocks Check that you have enough replacement products for local conditions, and refill stocks as needed.
Page 35 From software version Maxwell 3 onwards, it is possible to replace a basestation while the rest of the CEDD AGL system remains operational. Only the affected basestation(s) have to be switched to maintenance mode. The steps to replace a basestation while the CEDD AGL system is in operational mode are as follows. Please follow these steps carefully! Requirements...
Page 36 Check that there is a suitable replacement product in stock. The replacement CEDD HPS Basestation should be configured for your CEDD AGL system. If not, order a replacement product. Inspect the quality of the replacement product. See the CEDD HPS Basestation Installation and Maintenance Manual, Chapter 4 Inspection.
Page 37 Check the condition of the CEDD HPS Basestation. Report the state of the product; if there is visible damage, take photos. System Instructions - CEDD AGL © TKH Airport Solutions 2024. All rights reserved. All specifications subject to change without notice.
Page 38 Navigate to the menu: Configuration > Replace Basestations and Nodes. Click Add Basestation replacement. Search for the Basestation you want to replace and click Select. Enter the new BUID. System Instructions - CEDD AGL © TKH Airport Solutions 2024. All rights reserved. All specifications subject to change without notice.
Page 39 The system should be fully back operational. 7.12 Validate You can perform validation using either the ALCMS or the TKH Airport Solutions application (CEDD Control). In case you want to validate via CEDD Control: verify the status of the CEDD HPS Basestation in CEDD Master CMS using CEDD Control: Start CEDD Control.
Page 40 Click the CEDD System tab and set system mode to Idle. Inform Tower Control that they can start using the system again. System Instructions - CEDD AGL © TKH Airport Solutions 2024. All rights reserved. All specifications subject to change without notice.
Page 41 Follow the procedures in the service level agreement or warranty statement, as applicable. Some common procedures are described below. Reporting Report to TKH Airport Solutions with details of quality issues and any problems with the old CEDD HPS Basestation. In the report include: •...
Page 42 Chapter 7 Corrective Maintenance • Chapter 9 Taking out of Service For a CEDD HPS Basestation that requires repair or disposal, pack it and return to TKH Airport Solutions. (Contact TKH Airport Solutions Customer Service for the correct address.) Check spares stocks Check that you have enough replacement products for local conditions, and refill stocks as needed.
Page 43 The number of failures and warnings are shown in the status part of the screen. Use the soft keys to enter the status menu or the control menu. System Instructions - CEDD AGL © TKH Airport Solutions 2024. All rights reserved. All specifications subject to change without notice.
Page 44 Press the Back key to view the Ethernet screen. Press the Up and Down keys to scroll through the list of Ethernet interfaces. System Instructions - CEDD AGL © TKH Airport Solutions 2024. All rights reserved. All specifications subject to change without notice.
Page 45 Press the Up and Down keys to select the control mode. Press the Select key √ to confirm the selection. System Instructions - CEDD AGL © TKH Airport Solutions 2024. All rights reserved. All specifications subject to change without notice.
Page 46 Press the + key to increase the intensity of the lights within the switch group: the indicated intensity and the number of bars will increase accordingly. System Instructions - CEDD AGL © TKH Airport Solutions 2024. All rights reserved. All specifications subject to change without notice.
Page 47 Being part of the TKH Group, our company can build on a history of more than 90 years in smart connectivity, energy distribution and AGL.