Advertisement
Quick Links
Bond Breeze Manual
BWS-1000
1.
Overview
The Bond Breeze is a wind , rain and light sensor that can be paired with a Bond
Bridge Pro in order to trigger screens, shades and louver systems.
The set up of the Bond breeze is very simple and is done via the Bond Home
application.
The Bond Breeze needs to be paired with a Bond bridge Pro and can not be
used as a stand alone device.
Advertisement
Summary of Contents for Bond Breeze BWS-1000
- Page 1 BWS-1000 Overview The Bond Breeze is a wind , rain and light sensor that can be paired with a Bond Bridge Pro in order to trigger screens, shades and louver systems. The set up of the Bond breeze is very simple and is done via the Bond Home application.
- Page 2 The Bond Breeze is not communicating directly with the motors. Once the setup is completed the Bond Bridge Pro and the Bond Breeze are NOT reliant on internet connection in order to trigger a command Power The primary source of power to the Bond Breeze is the solar panel and power storage capacitor that are embedded in the unit.
- Page 3 12 VDC Cable connection Battery compartment Once the Bond Breeze is powered the Blue LED at the top of the unit should be flashing. This does not mean that the Bond Breeze is already paired with the Bond Bridge Pro...
- Page 4 Before setting up the Bond Breeze make sure you have downloaded the Bond Home app and completed the set up of a Bond Bridge Pro on your account. Once the Bond bridge Pro is set up on the account you can start the Bond Breeze setup...
- Page 5 Pair without a QR code Follow the setup instructions to add a new device to the Bond home app and chose to add a Bond Breeze accessory in the accessory list Once the pairing window opens make sure you press and release the CAL button on the Bond Breeze within 60 seconds.
-
Page 6: Symbol Meaning
The sensor is designed to be fixed on a 1"OD (2.54 mm) pole, using the bottom plastic screw thread. Before installation, ensure that the pole is vertical or close to vertical – use a level if needed. Warning The Bond Breeze is not a safety device... -
Page 7: Fcc Warning
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the Breeze BWS-1000 and is the answer not in the manual?
Questions and answers