ASROCK Z890 PRO RS User Manual

Hide thumbs

page of 67

/ 67
Bookmarks

Quick Links

Download this manual

Questo manuale d'istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per

AsRock Z890 Pro

o cerca il tuo prodotto tra le

migliori offerte di Schede Madri

Need help?

Do you have a question about the Z890 PRO RS and is the answer not in the manual?

Questions and answers

Summary of Contents for ASROCK Z890 PRO RS

Page 1 Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per AsRock Z890 Pro o cerca il tuo prodotto tra le migliori offerte di Schede Madri...
Page 2 Contact Information If you need to contact ASRock or want to know more about ASRock, you’re welcome to visit ASRock’s website at http://www.asrock.com; or you may contact your dealer for further information. For technical questions, please submit a support request form at https://event.asrock.com/tsd.asp...
Page 3 Contents Chapter 1 Introduction Package Contents Specifications Motherboard Layout I/O Panel Block Diagram Chapter 2 Installation Installing the CPU Installing the CPU Fan and Heatsink Installing Memory Modules (DIMM) Connecting the Front Panel Header Installing the Motherboard Installing SATA Drives Installing a Graphics Card Connecting Peripheral Devices Connecting the Power Connectors...
Page 4 WiFi/BT) Installation Guide 2.16 M.2 SSD Installation Guide (M2_1) 2.17 M.2 SSD Installation Guide (M2_2) 2.18 M.2 SSD Installation Guide (M2_3) 2.19 M.2 SSD Installation Guide (M2_4)
Page 5 If you require technical support related to this mother- board, please visit our website for specific information about the model you are using. You may find the latest VGA cards and CPU support list on ASRock’s website as well. ASRock website http://www.asrock.com.
Page 6 • Supports DDR5 non-ECC, un-buffered memory up to 9066+(OC)* • Max. capacity of system memory: 256GB • Supports Intel® Extreme Memory Profile (XMP) 3.0x * Please refer to Memory Support List on ASRock's website for more information. (http://www.asrock.com/) Expansion CPU: Slot •...
Page 7 Z890 Pro RS • Intel® X LPG Graphics Architecture • 1 x HDMI 2.1 TMDS/FRL 8G Compatible, supports HDR, HDCP 2.3 and max. resolution up to 4K 120Hz • 1 x DisplayPort 1.4 with DSC (compressed), supports HDCP 2.3 and max. resolution up to 8K 60Hz / 5K 120Hz •...
Page 8 • 1 x USB 3.2 Gen2 Type-A Port (10 Gb/s) • 2 x USB 3.2 Gen1 Ports • 4 x USB 2.0 Ports • 1 x RJ-45 LAN Port • 1 x BIOS Flashback Button • HD Audio Jacks: Line in / Front Speaker / Microphone * Supports USB PD 3.0 up to 5V@3A (15W) charging Storage CPU:...
Page 9 • ErP/EuP ready (ErP/EuP ready power supply is required) * For detailed product information, please visit our website: http://www.asrock.com Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using third-party overclocking tools.
Page 10 1.3 Motherboard Layout CPU_FAN2 ATX12V1 ATX12V2 AIO_PUMP CPU_FAN1 DRAM BOOT USB 3.2 Gen1 Top: T: USB32_2 RJ-45 B: USB32_3 CHA_FAN5 PCIE1 Intel M.2_WIFI_CT1 Z890 CMOS Battery M2_WIFI SUPER PCIE2 AUDIO CODEC PCIE3 PCIE4 PANEL1 USB_5_6 USB_7_8 CHA_FAN4 CHA_FAN3 CHA_FAN2 CHA_FAN1 BIOS SPK_PLED1 HD_AUDIO1...
Page 11 Z890 Pro RS No. Description ATX 12V Power Connector (ATX12V1) ATX 12V Power Connector (ATX12V2) CPU Fan Connector (CPU_FAN1) 2 x 288-pin DDR5 DIMM Slots (DDR5_A1, DDR5_B1) 2 x 288-pin DDR5 DIMM Slots (DDR5_A2, DDR5_B2) CPU Fan Connector (CPU_FAN2) AIO Pump Fan Connector (AIO_PUMP)
Page 12 1.4 I/O Panel No. Description No. Description DisplayPort 1.4 USB 2.0 Ports (USB_1234) USB 3.2 Gen2 Port (USB32_1) USB 3.2 Gen1 Ports (USB32_23) 2.5G LAN RJ-45 Port* BIOS Flashback Button Line In (Light Blue)** Thunderbolt 4 Type-C Port (TB_2) Front Speaker (Lime)** Thunderbolt 4 Type-C Port (TB_1) Microphone (Pink)**...
Page 13 Z890 Pro RS 1.5 Block Diagram...
Page 14 Chapter 2 Installation This is an ATX form factor motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Pre-installation Precautions Take note of the following precautions before you install motherboard components or change any motherboard settings.
Page 15 Z890 Pro RS DO NOT remove this Memory OC Shield (patent pending) from the motherboard. Removing this may affect memory overclocking performance and stability. The illustration shown here is for reference only and may not be an exact representation of your mother-...
Page 16 2.1 Installing the CPU 1. Before you insert the 1851-Pin CPU into the socket, please check if the PnP cap is on the socket, if the CPU surface is unclean, or if there are any bent pins in the socket. Do not force to insert the CPU into the socket if above situation is found.
Page 17 Z890 Pro RS Please save and replace the cover if the processor is removed. The cover must be placed if you wish to return the motherboard for after service.
Page 18 2.2 Installing the CPU Fan and Heatsink...
Page 19 Z890 Pro RS 2.3 Installing Memory Modules (DIMM) This motherboard provides four 288-pin DDR5 (Double Data Rate 5) DIMM slots, and supports Dual Channel Memory Technology. 1. For dual channel configuration, you always need to install identical (the same brand, speed, size and chip-type) DDR5 DIMM pairs.
Page 21 Z890 Pro RS 2.4 Connecting the Front Panel Header Front Panel Wires System Panel Header Power SW (-) RESET SW (+) Power SW (+) RESET SW (-) Power LED (-) HDD LED (-) Power LED (+) HDD LED (+) PANEL1...
Page 22 2.5 Installing the Motherboard...
Page 23 Z890 Pro RS 2.6 Installing SATA Drives Optical Drive SATA Drive SATA Data Cable...
Page 24 SATA Power Connector SATA Data Connector...
Page 25 Z890 Pro RS 2.7 Installing a Graphics Card CLICK!
Page 26 Expansion Slots (PCIe Slots) There are 4 PCI Express slots on the motherboard. Before installing an expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation.
Page 27 Z890 Pro RS 2.8 Connecting Peripheral Devices...
Page 28 2.9 Connecting the Power Connectors...
Page 29 Z890 Pro RS 2.10 Power On...
Page 30 2.11 Jumpers Setup The illustration shows how jumpers are setup. When the jumper cap is placed on the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper is “Open”. Clear CMOS Jumper (CLRMOS1) (see p.6, No. 20) CLRMOS1 allows you to clear the data in CMOS.
Page 31 Z890 Pro RS 2.12 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage to the motherboard.
Page 32 Power LED and Speaker Header (7-pin SPK_PLED1) (see p.6, No. 18) Please connect the chassis power LED and the chassis speaker to this header. SPK_PLED1 SPEAKER DUMMY DUMMY PLED+ PLED+ PLED-...
Page 33 Z890 Pro RS Serial ATA3 Connectors Right Angle: (SATA3_0) (see p.6, No. 16)(Upper) (SATA3_1) (see p.6, No. 16)(Lower) (SATA3_2) (see p.6, No. 15)(Upper) (SATA3_3) (see p.6, No. 15)(Lower) These four SATA3 connectors support SATA data cables for internal storage devices with...
Page 34 USB 2.0 Headers (9-pin USB_5_6) (see p.6, No. 26) (9-pin USB_7_8) (see p.6, No. 25) There are two headers on this motherboard. Each USB 2.0 header can support two ports. USB_7_8 USB_PWR DUMMY USB_PWR USB_5_6 USB_PWR DUMMY USB_PWR...
Page 35 Z890 Pro RS USB 3.2 Gen1 Headers Right Angle: (19-pin USB32_4_5) (see p.6, No. 14) Vertical: (19-pin USB32_6_7) (see p.6, No. 12) There are two headers on this motherboard. Each USB 3.2 Gen1 header can support two ports. USB32_6_7 Vbus...
Page 36 Front Panel Type C USB 3.2 Gen2x2 Header (20-pin USB32_TC1) (see p.6, No. 13) There is one Front Panel Type C USB 3.2 Gen2x2 Header on this motherboard. This header is used for connecting a USB 3.2 Gen2x2 module for additional USB 3.2 Gen2x2 ports.
Page 37 Z890 Pro RS Front Panel Audio Header (9-pin HD_AUDIO1) (see p.6, No. 29) This header is for connecting audio devices to the front audio panel. HD_AUDIO1 PRESENCE# MIC_RET OUT_RET OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L High Definition Audio supports Jack Sensing, but the panel wire on the chassis must sup- port HDA to function correctly.
Page 38 Chassis Fan Connectors (4-pin CHA_FAN1) (see p.6, No. 21) (4-pin CHA_FAN2) (see p.6, No. 22) (4-pin CHA_FAN3) (see p.6, No. 23) (4-pin CHA_FAN4) (see p.6, No. 24) (4-pin CHA_FAN5) (see p.6, No. 30) These headers allow you to connect Case or Radiator fans. If you plan to connect a 3-pin fan, please connect it to Pin 1-3.
Page 39 Z890 Pro RS CPU Fan Connector (4-pin CPU_FAN1) (see p.6, No. 3) This header allows you to connect CPU fan. If you plan to connect a 3-pin fan, please connect it to Pin 1-3. CPU_FAN1 +12V CPU_F AN_SPEED FAN_SPEED_CONTROL CPU Fan Connector (4-pin CPU_FAN2) (see p.6, No.
Page 40 AIO Pump Fan Connector (4-pin AIO_PUMP) (see p.6, No. 7) This header allows you to connect AIO (All-in-One) pump or fan. If you plan to connect a 3-pin AIO cooler fan, please connect it to Pin 1-3. AIO_PUMP FAN_VOLTAGE AIO_PUMP_SPEED FAN_SPEED_CONTROL ATX Power Connector (24-pin ATXPWR1) (see p.6, No.
Page 41 Z890 Pro RS ATX 12V Power Connectors (8-pin ATX12V1) (see p.6, No. 1) (8-pin ATX12V2) (see p.6, No. 2) This motherboard provides two 8-pin ATX 12V power connectors. To use a 4-pin ATX power supply, please plug it along Pin 1 and Pin 5.
Page 42 SPI TPM Header (13-pin SPI_TPM_J1) (see p.6, No. 19) This connector supports SPI Trusted Platform Module (TPM) system, which can securely store keys, digital certificates, passwords, and data. A TPM system also helps enhance network security, protects digital identities, and ensures platform integrity. SPI_TPM_J1 SPI_DQ3 SPI_PWR...
Page 43 Z890 Pro RS RGB LED Header (4-pin RGB_LED1) (see p.6, No. 28) This RGB header is used to connect RGB LED extension cable which allow users to choose from various LED lighting effects. Caution: Never install the RGB LED cable in the wrong orientation; otherwise, the cable may be damaged.
Page 44 Addressable LED Headers (3-pin ADDR_LED1) (see p.6, No. 27) (3-pin ADDR_LED2) (see p.6, No. 9) (3-pin ADDR_LED3) (see p.6, No. 8) These headers are used to connect Addressable LED extension cables which allow users to choose from various LED lighting effects. Caution: Never install the Addressable LED cable in the wrong orientation;...
Page 45 Z890 Pro RS 1. Never install the Addressable LED cable in the wrong orientation; otherwise, the cable may be damaged. 2. Before installing or removing your Addressable LED cable, please power off your system and unplug the power cord from the power supply. Failure to do so may cause damages to motherboard components.
Page 46 2.13 Post Status Checker Post Status Checker (PSC) diagnoses the computer when users power on the machine. The LEDs light up to show what component is running into an issue. They emit red, yellow, white and yellow-green lights to indicate, respectively, the CPU, memory, VGA and storage are not detected or fail.
Page 47 Z890 Pro RS 2.14 Smart Button The motherboard has one smart switch: BIOS Flashback Button, allowing users to quickly flash the BIOS. BIOS Flashback Button (BIOS_FB1) (see p.8, No. 9) BIOS Flashback Button allows users to flash the BIOS. BIOS_FB1...
Page 48 ASRock BIOS Flashback feature allows you to update BIOS without powering on the system, even without CPU. Before using the BIOS Flashback function, please suspend BitLocker and any encryption or security relying on the TPM. Make sure that you have already stored and backup-ed the recovery key.
Page 49 Z890 Pro RS 2.15 M.2 WiFi/BT PCIe WiFi Module and Intel® CNVi (Integrated WiFi/BT) Installation Guide The M.2 is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. The M.2 Socket (Key E) supports type 2230 WiFi/BT PCIe WiFi module and Intel®...
Page 50 Step 3 Gently insert the WiFi/BT module or Intel® CNVi (Integrated WiFi/ BT) into the M.2 slot. Please be aware that the module only fits in one orientation. Step 4 Tighten the screw with a screwdriver to secure the module into place. Please do not overtighten the screw as this might damage the module.
Page 51 Z890 Pro RS 2.16 M.2 SSD Installation Guide (M2_1) The M.2 is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. The Blazing M.2 Socket (M2_1, Key M) supports type 2280 PCIe Gen5x4 (128 Gb/s) mode.
Page 52 Step 3 Before installing a M.2 SSD, please loosen the screws to remove the M.2 heatsink. *Please remove the protective films on the bottom side of the M.2 heatsink before you install a M.2 SSD. Step 4 Align and gently insert the M.2 SSD into the M.2 slot.
Page 53 Z890 Pro RS Step 5 Ensure that the notch at the end of the M.2 SSD aligns with the nut. Then secure the M.2 SSD by turning the nut lock clockwise to its locked position. Step 6 Tighten the screws with a screwdriver to secure the M.2 SSD and M.2...
Page 54 2.17 M.2 SSD Installation Guide (M2_2) The M.2 is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. The Hyper M.2 Socket (M2_2 , Key M) supports type 2280 PCIe Gen4x4 (64 Gb/s) mode. Installing the M.2 SSD Step 1 Prepare a M.2 SSD.
Page 55 Z890 Pro RS Step 3 Align and gently insert the M.2 SSD into the M.2 slot. Please be aware that the M.2 SSD only fits in one orientation. Step 4 Ensure that the notch at the end of the M.2 SSD aligns with the nut.
Page 56 2.18 M.2 SSD Installation Guide (M2_3) The M.2 is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. The Hyper M.2 Socket (M2_3 , Key M) supports type 2280 PCIe Gen4x4 (64 Gb/s) mode. Installing the M.2 SSD Step 1 Prepare a M.2 SSDle.
Page 57 Z890 Pro RS Step 3 Before installing a M.2 SSD, please loosen the screws to remove the M.2 heatsink. *Please remove the protective films on the bottom side of the M.2 heatsink before you install a M.2 SSD. Step 4 Align and gently insert the M.2 SSD...
Page 58 Tighten the screw with a screwdriver to secure the M.2 heatsink into place. Please do not overtighten the screw as this might damage the M.2 heatsink. For the latest updates of M.2 SSD support list, please visit our website for details: http:// www.asrock.com...
Page 59 Z890 Pro RS 2.19 M.2 SSD Installation Guide (M2_4) The M.2 is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. The Hyper M.2 Socket (M2_4 , Key M) supports type2230/2242/2260/2280 SATA3 6.0 Gb/s & PCIe Gen4x4 (64 Gb/s) modes.
Page 60 Step 3 Before installing a M.2 SSD, please loosen the screws to remove the M.2 heatsink. *Please remove the protective films on the bottom side of the M.2 heatsink before you install a M.2 SSD. Step 4 Peel off the yellow protective film on the nut to be used.
Page 61 Z890 Pro RS Step 6 Tighten the screw with a screwdriver to secure the M.2 SSD into place. Please do not overtighten the screw as this might damage the M.2 SSD. NUT2 NUT1 Skip Step 6 if your M.2 SSD is Type 2280.
Page 62 ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose. In no event shall ASRock, its directors, officers, employees, or agents be liable for any indirect, special, incidental, or consequential...
Page 63 INTEL END USER SOFTWARE LICENSE AGREEMENT IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING. LICENSE. Licensee has a license under Intel’s copyrights to reproduce Intel’s Software only in its unmodified and binary form, (with the accompanying documentation, the “Software”) for Licensee’s personal use only, and not commercial use, in connection with Intel-based products for which the Software has been provided, subject to the following conditions: (a) Licensee may not disclose, distribute or transfer any part of the Software, and You...
Page 64 U.S. GOVERNMENT RESTRICTED RIGHTS. The Software is a commercial item (as defined in 48 C.F.R. 2.101) consisting of commercial computer software and commercial computer software documentation (as those terms are used in 48 C.F.R. 12.212), consistent with 48 C.F.R. 12.212 and 48 C.F.R 227.7202-1 through 227.7202-4. You will not provide the Software to the U.S.
Page 65 FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 66 ASRock follows the green design concept to design and manufacture our products, and makes sure that each stage of the product life cycle of ASRock product is in line with global environmental regulations. In addition, ASRock disclose the relevant information based on regulation requirements.
Page 67 If you require assistance please call ASRock Tel : +886-2-28965588 ext.123 (Standard International call charges apply)

This manual is also suitable for:

Pro seriesZ890 pro rs wifi white