Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Hanwha Vision Manuals
  4. DVR
  5. HRX Series
  6. User manual

Hanwha Vision HRX Series User Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
DIGITAL VIDEO RECORDER
User Manual
HRX Series

Advertisement

loading
Need help?

Need help?

Do you have a question about the HRX Series and is the answer not in the manual?

Questions and answers

Related Manuals for Hanwha Vision HRX Series

Summary of Contents for Hanwha Vision HRX Series

  • Page 1 DIGITAL VIDEO RECORDER User Manual HRX Series...
  • Page 2 ❖ Design and specifications are subject to change without prior notice. You can download the latest version from the Hanwha Vision web site. (www.HanwhaVision.com) ❖ The initial administrator ID is “admin” and the password should be set when logging in for the first time.
  • Page 3 Monitor real time events that occur in Recorder, sensors, and cameras or search through logs Before using this product, check if the latest version of this software is installed. Go to Hanwha Vision's website (http:// www.HanwhaVision.com) to check the software version and download necessary files.
  • Page 4 overview CAuTIOn RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ● ACCORDING TO THE INSTRUCTIONS. Do not ingest battery, Chemical Burn Hazard. ● This product contains a coin / button cell battery. If the coin / button cell battery is swallowed, it can cause ●...
  • Page 5 COnTEnTS OVERVIEw Important Safety Instructions Camera Video Control Product User Manual Description Manual trigger Target Audience Capture How to Use the Product Instant Viewer Contents Temperature Detection Mode PTZ Mode Zoom In GETTInG STARTED Starting the system Audio installation Wizard Display Text Shutting down the System Change Channel Aspect Ratio...
  • Page 6 overview SETuP STARTInG wEb VIEwER Screen Layout of the Setup What is Web Viewer? Product Features Setting the Camera Setting the Channel System Requirements Setting the Camera Functions Connecting Web Viewer Setting the Profiles Set the recorder password Setting Camera Password installation Wizard Setting the Recording Record schedule...
  • Page 7 Camera Video Control Setting the Recording Manual trigger Record Schedule Capture Record Setup PC Recording Record Options Instant Viewer Setting the Event Microphone Output Event Setup PTZ Mode Event Rule Setup Alarm Input Zoom In ONVIF Setup Audio Schedule Image Rotation Channel Aspect Ratio Setting the Device Storage Device...
  • Page 8 getting started Starting the SyStem inStallation WizarD As shown below, proceed through each step of the <installation wizard>. 1. Connect the power cable of the recorder to the wall outlet. Install Wizard can only be accessed at factory reset. If you do not want to proceed, click <exit>. 2.
  • Page 9 3. Set the network connection type and the connection environment on the <network> screen, and then click the 4. Set the administrator password on the <recorder iD/PW> screen and click the <next>. <next>. Click < > to view the basic guide for setting a password. Refer to the password setup rules. 5.
  • Page 10 getting started 6. Set the date, time, and daylight saving time on the <Date & time> screen, and then click the <next>. 8. On the <Camera register> screen, select a camera to register from the searched camera list and click <register>. Select a camera to register from the list and click <Change iP>.
  • Page 11 10. On the <easy connect> screen, a remote user can network a recorder in a dynamic IP system. ShUtting DoWn the SyStem Click <enable> to test the connection to see if the current recorder can be connected remotely. When the connection is successful, a QR code is created.
  • Page 12 getting started login To use the Recorder menu, you are required to login as a user that is authorized to access the applicable menu. 1. Select <login> at the top right of the screen. 2. The <login> window will appear. 3.
  • Page 13 live Shows the video of the camera connected to the recorder. Also, you can adjust the camera and check the network Item Description transfer status. Displays information of the OSD screen on the video window. SCreen layoUt oF the live Shows channel information.
  • Page 14 live Checking the System Status Item Description The icon at the top of the screen indicates the status of the system. Displayed when manually recording a video while the access restriction for stop recording is enabled. Only a user with the permission to stop recording is allowed to stop recording. Displayed when exporting a recorded video in live mode.
  • Page 15 Check Camera list Check multichannel Cameras list For multichannel cameras registered with the Wisenet protocol, the channel information will be displayed under Displays the camera type, status, and name registered in the recorder. the model name of the multichannel camera. Registered channel (recording channel) Unregistered channel...
  • Page 16 live live Screen menu icons on the live Screen After selecting the desired channel on the split mode, roll the mouse cursor over the screen to see the live screen You can check the status or operation with the icons on the live screen. menu.
  • Page 17 oSD information Display Item Description You can show or hide the recording status, camera status, event display, etc. in the video window. Events from the recorder and camera are displayed in icons. Event Display To show or hide the OSD information, click < >...
  • Page 18 live Channel information Display Check the Camera Status You can check the information of the video being recorded with each camera. You can check the status of all cameras connected to the recorder. To check the channel information, click < >...
  • Page 19 CH13 CH14 CH15 CH16 CH19 CH10 CH11 CH12 CH13 CH10 CH11 CH12 CH13 record Status network Status If you select <record> in the <Status> menu, you can check the profile, record type, frame rate (Input/Record), Select <network> in the <Status> menu to check the status of network bandwidth currently being received/ CH19 and bit rate (Limit/Input/Record) for each channel.
  • Page 20 live Changing overall Channel aspect ratio Full Screen mode Video screen ratio for all channels can be changed in live split screen mode. You can change to full screen mode, which has no top/bottom/left/right areas of the live screen. Click < >...
  • Page 21 Setting UP the live layoUt add layout and Set name This section outlines how to select a series of channels based on their purpose/accessibility and monitor them in a 1. Click < > to add a layout. single layout. 2. Click < >...
  • Page 22 live Dynamic layout zooming in and out of videos You can enlarge or reduce the video by dragging a corner or vertex of the video in the desired direction. You can set the size and position of the video assigned to the layout as desired. If you double-click the corner or vertex of the enlarged video area, the video will be reduced step by step.
  • Page 23 moving videos Play layout Sequence To move the video, click the video and then drag and drop it in the desired location. You can automatically switch the layout list to a set time interval to view. Dragging it outside of the layout area will expand the layout area. Sequence Setting Click <...
  • Page 24 live real-time event monitoring event Search You can search events by camera, alarm input (recorder), and event type. Real-time events that occurred on the camera can be checked in the live video window and event list. To search for a specific event, click < >...
  • Page 25 alarm input filter Camera viDeo Control Displays the only events for the alarm input numbers of the selected recorder. By using the function icon of the video window, you can easily use the functions of capture, video zoom, PTZ camera and thermal imaging camera.
  • Page 26 live Capture instant viewer You can take a screenshot of the current video of a specific channel selected on the live screen. You can move the video back 30 seconds and play it while live monitoring. Instant viewer plays video from 30 seconds to 1 minute from the current time.
  • Page 27 Ptz mode zoom in You can run PTZ control of the selected channel. You can zoom in or out the video via digital zoom. Select the desired channel and click < >. Select the desired channel and click < >. Enters the PTZ control mode.
  • Page 28 live Display text Change Channel aspect ratio You can monitor texts regarding the sales record received from POS in real time. You can change the aspect ratio of each channel. ￭ ￭ Select the desired channel and click < >. This is executable when a text device is connected.
  • Page 29 Analog camera setup ￭ ￭ It supports only the Hanwha Vision PTZ function network camera, ONVIF registration network camera, RS485/422(Samsung-T, Pelco-D, Pelco-P), and coaxial analog camera. Set the preset position to move the camera, and then select the desired preset to move to the...
  • Page 30 live Using Digital Ptz (D-Ptz) Function to delete a registered preset 1. Click < >. 1. Register a camera that supports the D-PTZ profile. ￭ ￭ 2. Click < >. <Delete preset> window will appear. In cameras that support the D-PTZ profile, you can use the D-PTZ function. 2.
  • Page 31 exPorting the reCorDeD viDeo 3. After completing the export setup, select <Start>. ￭ ￭ If there is no device to export, the <Start> button will be deactivated. ￭ ￭ You can search the storage device to be exported and export the recorded video of the desired time by layout or If you click <Stop>...
  • Page 32 search time Search You can search recorded video by various conditions such as time, event, and export. You can search the recorded data by the desired date and time conditions. Screen Layout of the Search ￭ The time displayed will be based on the time zone and daylight saving time (DST) applied time zone, so it may be displayed differently depending on whether the data time zone recorded at the same time and daylight saving time (DST) is applied.
  • Page 33 event Search text Search You can search for various events by channel. You can search the data input to the POS device connected to the recorder. 1. Select <event search> in the <Search> menu. 1. Select <text search> in the <Search> menu. 2.
  • Page 34 search export Search arB Search You can search the exported data on the connected storage device. Only data saved in recorder file format when You can search auto-recovery backup data stored on ARB storage devices. exported will be retrieved. 1. Select <arB search> in the <Search> menu. ￭...
  • Page 35 Bookmark Search Smart Search You can search for bookmarked data. You can search for events by selecting a region of interest, an exclusive region, or a virtual line from a recorded video at a specific time. ￭ To use smart search, you need to set the area of the camera's “Motion Detection" or “IVA” to the entire area. However, if you want to search for cameras after Wisenet X series, you must select “Enable"...
  • Page 36 play You can play the recorded data and export the video you want during playback. item Description Screen Layout of the pLay Playback control You can control video playback. Date/Time Set the date/time. Time line Move the playback position and display event data. You can change the number of channels displayed in the time line.
  • Page 37 pLay Search reSuLtS play Button name and function paused state time Line adjustment You can move the playback position and zoom the time line in and out. ● Click the desired play position in the time line. The playback start position will be moved. ￭...
  • Page 38 play Search reSuLtS export You can export the search results to a file. 1. Click the < > button. 2. Select a layout and channel to export. 3. Select a start date/time and an end date/time. ￭ If you changed the time zone of the recorder, select whether to apply DST. 4.
  • Page 39 setup Setting the camera Sets the camera, recording, event, device, network, and system environment. You can access to the channel setup, camera settings, and profiles and camera password-related settings. Screen Layout of the Setup Setting the channel You can register and connect the cameras per channel. Setup >...
  • Page 40 setup Setting the analog camera automatic registration of network cameras 1. Click <analog> in the <channel Setup> field. 1. In the <channel setup> field, click on the <auto detect> button. 2. Search for an analog camera connected. 2. <auto detect> window appears. ￭...
  • Page 41 – Wisenet Camera : You can register Hanwha Vision's cameras and encoders. – ID : Enter the camera ID. – Wisenet Multi-Channel : You can register Hanwha Vision's multi directional cameras and multi-imager – Password : Enter the camera password.
  • Page 42 setup if you want to check the error details of camera registration network camera firmware upgrade If you failed to register a camera, the reason for the failure will be displayed. connection failed due to unknown error. : This message appears if the camera has failed to be registered ●...
  • Page 43 Setting the camera functions exposure You can adjust the exposure of your camera. You can set the camera while viewing the live video of the selected camera. You can set brightness, shutter, SSNR, Sens-up, iris/lens, and AGC. Brightness : Adjusts the brightness by setting the exposure value. ●...
  • Page 44 setup Setting the profiles Setting the Live profile You can change the live setup for the camera. Setting the recording profile Setup > camera > profile setup > Live You can set the video profile where the recording will be played for the camera connected to each channel. Setup >...
  • Page 45 Setting the remote profile editing the profiles You can set the video profile transmitted to the network. You can change the video setting for the camera registered for each channel. Setup > camera > profile setup > remote Setup > camera > profile setup ●...
  • Page 46 setup Dewarping Setup how to set WiseStream Press the <Dewarping> button at the bottom of the <Detailed profile configuration> window to go to the Function to analyze the complexity of the video and effectively reduce the data size while maintaining the distortion correction setup popup window for each channel.
  • Page 47 Dynamic goV/fpS setup Setting camera password Dynamic GOV can be used to automatically change the length of GOV depending on the video condition. For You can change the passwords of all registered cameras at once. details, refer to the camera's help or the product's user guide. You can register the camera’s ID and password.
  • Page 48 setup Setting the recorDing record Setup You can set the resolution and number of recordings for each channel when an event occurs or during a normal You can setup scheduled recording, event recording and other recording related settings. recording. You can check frame rates and data transfer amount of Full Frame and Key Frame recordings for each channel, record schedule and set the transfer limit for recordings.
  • Page 49 ￭ Setting the eVent If a channel's data transfer exceeds defined allowed limit, then it may affect to other channels, and may force switching to <I-frame> recording even when the channel is configured to <Full frame> recording mode. For Key Frame recording channels, the icon for limited You can set the event-related settings such as whether or not an event is detected for each channel and whether an recording appears on the live screen's top side.
  • Page 50 setup ● Object size : You can set the size of the object to recognize the motion. – Click <Setup> to select the minimum/maximum size and set the object size on the preview screen. Setup > event > event setup > iVa ●...
  • Page 51 tampering event rule Setup You can set the event trigger and action rule to output an alarm when an event occurs. Setup > event > event setup > tampering Setup > event > event rule setup Tampering detection : You can set whether to enable tampering detection. ●...
  • Page 52 setup register a new event rule Item Description Video loss detection SD Card Dynamic event Example) DigitalAutoTracking, Queue, ShockDetection, SocialDistancingDetection ObjectDetection Manual trigger Video loss recovered System event (Change password, Upgrage, HDD state, Fan failure, Power On/Off, Start manual recording, End manual recording, Recording error, Account locked) 1.
  • Page 53 – FTP: When an event occurs, the images are transferred to the designated FTP server. The overlapping onVif Setup events that occurred during the set delivery interval will be sent as text in an html format file. ￭ You can set the details related to camera events registered with the ONVIF protocol. Set the FTP connection and delivery interval in the “Setup >...
  • Page 54 setup Schedule Setting the DeVice When setting the event rule, you can set the operating time of the event action. You can make the detailed settings for devices such as storage device and monitors. Setup > event > Schedule Storage Device You can set the storage device usage and check the setting status.
  • Page 55 ￭ ● Storage Status : Displays the working status of a storage device. Click the <View> to display the storage status The ARB feature is available only when your video is saved in the SD card after registering your Wisenet camera using the Wisenet protocol. window.
  • Page 56 setup monitor extended monitor setting This function is only available for products that support the use of an extended monitor. You can set the information displayed on the monitor as well as the output system. For products that support extended monitor, see "products supporting each feature" (Page 4) in the Product Setup >...
  • Page 57 configure analog video display text You can access the setting regarding the video display of the analog camera. You can set the POS device setting to send text information and text event information. ￭ If the monitor is set to Extended mode, spot output cannot be set. Device Settings You can make detailed settings for the POS device connected to the recorder.
  • Page 58 setup registering a text Device text event Settings You can set the text to receive an alarm when an event occurs. Setup > Device > text > event Total amount : Set the condition of the total amount to be notified when a text event occurs. Check whether ●...
  • Page 59 Setting the netWorK connecting and Setting the network Networking may differ from the connection method, check your environment before setting the connection You can set various network functions, such as monitoring live video by connecting to a network from a remote location mode.
  • Page 60 setup Setting the Dhcp ip address of the Broadband router DDnS & p2p ● 1. To access the Broadband Router's configurations, open a web browser on the local PC that is connected to the A remote user can network a recorder using a DDNS address in a dynamic IP system. If you cannot connect with a Broadband Router and enter the router's address (ex : http://192.168.1.1).
  • Page 61 ￭ connecting to the Viewer In a double NAT environment or if the router's port is not configured, the DDNS status will be displayed as <Successful>, but the DDNS connection from the viewer to the recorder may fail. ￭ You must be connected to an external network for a DDNS connection. (If there are two or more networks, be sure to connect an external to connect to the Wisenet mobile from your smartphone network to the network set as the <Default gateway>.) ￭...
  • Page 62 setup ip filtering httpS You can prepare the list of IP addresses to allow or block access to a specific IP address. You can choose a secured connection system or install a certificate. Setup > network > ip filtering Setup > network > httpS ●...
  • Page 63 802.1x When connecting to a network, you can select whether to use the 802.1x protocol and install a corresponding When an event occurs, it can be configured to send the event image to the FTP server. certificate. Setup > network > ftp 802.1x is an authentication system between a server and a client, which prevents hacking, virus infection, and information leakage of transmitted and received network data.
  • Page 64 setup e-mail event Setting You can set the interval and type of the event that will be sent to the user. You can send an e-mail to a Recorder-registered user at a specific time interval, or if an event occurs. Setup >...
  • Page 65 Snmp Dhcp Server The SNMP protocol allows system or network administrators to remotely monitor and configure the network You can set the internal DHCP server and assign an IP address to the network camera. devices. network Setting Setup > network > Snmp Setup >...
  • Page 66 setup checking the status Setting the SyStem You can check the IP address assigned to the current DHCP server, MAC address, and the connected network port You can set the date, language, authority, etc. displayed when using the system, and query system information or log information.
  • Page 67 user ● Holiday : A user can select specific dates as holidays according to their own preferences. Select a holiday from the calendar displayed by clicking <Setup>. You can manage users, such as adding or deleting users and granting different authorities for each user. –...
  • Page 68 setup user setting if you want to register a user You can create user groups and set authorities for each group. You can manage user information such as registering and deleting users in the created user group. Setup > System > user > user 1.
  • Page 69 restriction Settings if the user has restricted access Set user's restricted access or network restriction. If a general user selects a menu to which they do not have access, an access restriction confirmation window will be displayed. If all rights are restricted, only the accessible menu of the live screen menu will be displayed, and Items with restrictions will require logging in for use.
  • Page 70 setup System management to upgrade the current software version You can check the current system version and update to a new version, export data, setting initialization, and more. checking the System information You can check the current software version and MAC address before proceeding with the upgrade. Setup >...
  • Page 71 Settings You can export the information set in the recorder to a storage device and apply the same information to other You can check the log information related to system, events, and export. recorders. checking the system log Setup > System > System management > Settings System Log shows log and timestamp on every system start up, system shutdown, and changes on system settings.
  • Page 72 setup checking the event log checking the export log You can search recorded events including alarms, camera events and video loss. You can search the user who performed the export and the execution time and details (time, channel, device, file It also shows the log and its timestamp.
  • Page 73 starting web viewer What is Web VieWer? ConneCting Web VieWer Web Viewer is a software program with which the operator can access a remote Recorder for real-time monitoring, PTZ 1. Open your web browser and type the IP address or URL of Recorder into the URL address box. control (if configured) or search.
  • Page 74 starting web viewer set the reCorder PassWord 2. Set the video recording method on the <storage> screen, and then click <next>. After factory reset, the password must be set for the recorder to access the web viewer. Enter the password of the admin account, and click <Login>. ●...
  • Page 75 4. Set the network connection type and the connection environment on the <network> screen, and then click the 6. To modify the date and time on the <date & time> screen, select the <Modify> check box. <next> button. Set the date and time, and then click <next>. ￭...
  • Page 76 The ID of the connected user is displayed. Event list Shows a list of events that occurred on the camera. You are directly connected to the Hanwha Vision homepage (www.HanwhaVision.com). Layout list Displays the list of created layouts. Changes the color theme of Web Viewer.
  • Page 77 CheCking the systeM status CheCking CaMera List The icon at the top of the screen indicates the status of the system. Displays the camera type, status, and name registered in the recorder. Name Description Live > List Displayed when a problem occurs with the pan or recording status. Displayed when an error occurs in the power supply.
  • Page 78 live viewer CheCking the aLL CaMera status network status Click the < > button, followed by the <network> tab. You can check the status of all cameras connected to the recorder. You can check the status of network bandwidth currently being received/transmitted. Live status Click the <...
  • Page 79 Changing the Pattern oF sPLit sCreen FuLL sCreen Mode Click the < > button and select the desired split screen. You can change to full screen mode, which has no top/bottom/left/right areas of the live screen. The selected split screen is applied to the video window. Click <...
  • Page 80 live viewer setting uP the LiVe Layout Change of Layout Channel and name This section outlines how to select a series of channels based on their purpose/accessibility and monitor them in a 1. Click < > after selecting a layout. single layout.
  • Page 81 reaL-tiMe eVent Monitoring event search You can browse events by camera and event type. Real-time events that occurred on the camera can be checked in the live video window and event list. ￭ To search for a specific event, click < >...
  • Page 82 live viewer alarm input filter LiVe sCreen Menu Displays the only events for the alarm input numbers of the selected recorder. After selecting the desired channel on the split mode, roll the mouse cursor over the screen to see the live screen menu. The live screen menu appears differently depending on the recorder operation status or the type of the registered camera.
  • Page 83 CaMera Video ControL instant Viewer During monitoring, you can rewind 1 minute before playback. By using the function icon in the video window, you can easily enable functions such as screenshot, video rotation, and PTZ control. Select the desired channel and click < >.
  • Page 84 live viewer Ptz Mode zoom in You can run PTZ control of the selected channel. You can zoom in or out using the mouse wheel. Select the desired channel and click < >. If you scroll up using the mouse wheel, the selected video screen is enlarged by 10%, and a thumbnail window is displayed.
  • Page 85 Channel aspect ratio Name Description You can change the aspect ratio of each channel. Zoom out/Zoom in Activate the Zoom operation of the PTZ camera. Select the desired channel and click < >. Near/Far You can adjust the focus manually. It changes to the actual proportion of the video.
  • Page 86 live viewer using digital Ptz (d-Ptz) function to delete a registered preset 1. Click < >. 1. Register a camera that supports the D-PTZ profile. ￭ 2. Select the preset to delete, and click <delete>. In cameras that support the D-PTZ profile, you can use the D-PTZ function. 2.
  • Page 87 exPorting Video You can export the recorded video by manually inputting the desired channel, date, and time. 1. Click the < > button. 2. Select a layout to export and select the desired channel. 3. Set the start date/time and end date/time. ￭...
  • Page 88 search viewer tiMe searCh You can search and play the recorded video stored in the recorder by connecting the recorder remotely. You can search the recorded data by the desired date and time conditions. sCreen Layout oF the searCh VieWer ￭...
  • Page 89 eVent searCh text searCh You can search for various events by channel. You can search the data input to the POS device connected to the recorder. 1. Select <event search> in the <search> menu. 1. Select < text search> in the <search> menu. 2.
  • Page 90 search viewer bookMark searCh searCh resuLts exPort You can search for bookmarked data. Search results of events, texts and bookmarks can be exported to a file. example) bookmark search result export 1. Click < > in the search results list. 1.
  • Page 91 play PLay searCh resuLts exPort Video by seCtion setuP You can play the recorded data and export the video you want during playback. You can select the desired section from the time line or search list during video playing and export it to a file. 1.
  • Page 92 play Play button name and Function Paused state Playback state Name Description Previous event Go to the previous event video. Previous frame Moves backward to the key frame (I-frame). Playback Play the video. Next frame Moves forward one frame or more. Next event Go to the next event video.
  • Page 93 setup viewer setting the CaMera You can configure the Recorder settings remotely on the network. You can check a list of cameras that are connected to the Recorder and configure the necessary settings. sCreen Layout oF the setuP VieWer For details, refer to the "setup > setting the Camera" page in the Table of Contents. Channel setup You can register and connect a camera for each channel.
  • Page 94 setup viewer When you click the <Camera webviewer> button, a new camera web browser window is opened. Profile setup ● – This is not supported if the camera is connected to the RTSP protocol. You can set the profile for your camera. –...
  • Page 95 remote setting the reCording You can set the video profile transmitted to the network and the expansion monitor. For details, refer to the "setup > setting the recording" page in the Table of Contents. record schedule If you set a recording schedule for a specific date and time, the recording will start at that specific time. setup >...
  • Page 96 setup viewer record options setting the eVent You can set the hard disk recording option. For details, refer to the "setup > setting the event" page in the Table of Contents. ￭ You can set the recording duration separately for each channel. event setup setup >...
  • Page 97 tampering detection event rule setup You can change the tampering detection event setup. You can set the event trigger and action rule to output an alarm when an event occurs. setup > event > event rule setup Video loss detection You can change the video loss detection event setup.
  • Page 98 setup viewer onViF setup setting the deViCe You can set the camera registered with the Onvif protocol. You can check a list of devices that are connected to the Recorder and configure the necessary settings. For details, refer to the "setup > setting the device" page in the Table of Contents. setup >...
  • Page 99 Monitor event It is possible to set total amount conditions and keywords to display events of a POS device. You can set the information displayed on the monitor as well as the output system. setup > device > Monitor serial ￭...
  • Page 100 setup viewer setting the netWork ddns & P2P A remote user can network a recorder using a DDNS address in a dynamic IP system. If you cannot connect with a For details, refer to the "setup > setting the network" page in the Table of Contents. dynamic IP, you can easily access using a P2P service.
  • Page 101 httPs You can select a security connection system or install public certificates. When an event occurs, you can create settings related to the FTP server to which images will be transferred. setup > network > httPs setup > network > FtP ￭...
  • Page 102 setup viewer event snMP You can set the event interval and specify which events the server sends mails for. Using the SNMP protocol, the system or network administrator can remotely monitoring the network devices and sets the environment. setup > network > snMP recipient You can set groups and recipients to receive emails.
  • Page 103 status setting the systeM You can check the IP and MAC currently used through the DHCP server, and the connected network port. You can configure the various settings of the Recorder system. For details, refer to the "setup > setting the system" page in the Table of Contents. date/time/Language You can check and setup the current Date/Time and time related properties, as well as the language used for the interface on the screen.
  • Page 104 setup viewer user restriction settings You can set the user permission. You can manage users, such as adding or deleting users and granting different authorities for each user. setup > system > user administrator You can change the admin ID or the password. system Management You can check the current system version and update to a new version, export data, setting initialization, and more.
  • Page 105 settings event log Using a storage device, you can apply the current configuration of Recorder to another Recorder. The event log lists recorded events, such as sensor events, camera events, or image losses. Press the Initialization button to return the network settings to their factory default state. Items in the <exception>...
  • Page 106 export viewer seC baCkuP VieWer screen Layout of the backup Viewer You can play a file that is backed up in the format of SEC. Backup in SEC format produces backup data file, library file and self-executable viewer file. If you run the backup file viewer, the backup data file will be played. HRX-1632_CAM 01 2021-04-27 20 :54 :13 recommended system requirements...
  • Page 107 Name Description Saves the current video's image as in an image file. Supports JPEG file format. Screen Printout Prints out the current screen. You should have installed the appropriate printer driver before you can print out the screen. A toggle button. Each time you press this button, the audio output will toggle between activated and deactivated.
  • Page 108 appendix use JoystiCk using VirtuaL keyboard The function is only available for the product that supports a joystick. For products that support joy stick, see page 4 "Products supporting each feature” of the Product Specification Manual. The SPC-2000/2001 joystick is operated as follows : 1.
  • Page 109 troubLeshooting Problem Action Problem Action The frame number set for multiple data transmission set in camera or network environment Live video will be slow or cut off. ● The camera is not connected or the PC fails to connect to the ●...
  • Page 110 appendix Problem Action Problem Action Exported data cannot be played on a PC or recorder. ● When setting the file format for exporting, first decide whether the device to be played is a PC ● If the sum of input data for each channel exceeds the limit, the alarm icon and the pop up In the live screen, the <...

This manual is also suitable for:

Hrx-835aHrx-1635Hrx-1634