Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Contec MC-300 Series
- Page 1 Micro Controller MC-300 Series, Wall mount type MC-300B-DC5-455 User’s Guide CONTEC CO., LTD.
- Page 2 Check Your Package Thank you for purchasing the CONTEC product. The product consists of the items listed below. Check, with the following list, that your package is complete. If you discover damaged or missing items, contact your retailer. Product Configuration List - Unit [MC-300B-DC5-455]…1...
- Page 3 No part of this document may be copied or reproduced in any form by any means without prior written consent of CONTEC CO., LTD. CONTEC Co., LTD. makes no commitment to update or keep current the information contained in this document. The information in this document is subject to change without notice.
- Page 4 Table of Contents Check Your Package ............................ i Copyright ..............................ii Trademarks ..............................ii Table of Contents ............................iii BEFORE USING THE PRODUCT About the Unit ............................. 1 Features ..............................1 Customer Support ............................2 Web Site..............................2 Limited One-Year Warranty ........................2 How to Obtain Service ..........................
- Page 5 Distances between this product and its vicinity ................12 Setup of software............................13 SPECIFICATIONS Specifications ............................17 Hardware and factory settings ......................17 Functional Specifications ........................17 Establishment environment specifications ..................18 Physical Dimensions.......................... 18 Battery ................................ 19 MC-300B-DC5-455...
- Page 6 1. Before Using the Product 1. Before Using the Product This chapter provides information you should know before using the product. About the Unit This product is a micro controller that employs an on-board high precision Marvell Kirkwood SoC with integrated ARM®...
- Page 7 You can download updated driver software and differential files as well as sample programs available in several languages. Note! For product information Contact your retailer if you have any technical question about a CONTEC product or need its price, delivery time, or estimate information. Limited One-Year Warranty CONTEC products are warranted by CONTEC CO., LTD.
- Page 8 When inserting and removing a micro SD card, or attaching/removing connectors or cables, always remove the power cable from the power outlet. Do not modify this product. CONTEC will bear no responsibility for any problems or issues resulting from the modification of this product.
- Page 9 Any source code that has been modified by CONTEC to match this product is listed on the CONTEC website. We make no guarantees regarding the results of using this product for which open-source software is provided and the performance of the software itself.
- Page 10 1. Before Using the Product Environment Use this product in the following environment. If used in an unauthorized environment, this product may overheat, malfunction, or cause a failure. Operating temperature 0 - 50°C Humidity 10 - 90%RH (No condensation) Corrosive gases None Floating dust particles Not to be excessive...
- Page 11 1. Before Using the Product MC-300B-DC5-455...
- Page 12 2. Component Function 2. Component Function Component Function Figure 2.1. - 2.2. shows the names of major parts on the product. Figure 2.1. Connector side Figure 2.2. Front side USB port microSD slot DIP switch USB port (miniB) Power supply LAN port LAN port Reset switch...
- Page 13 2. Component Function Component Function (1) USB port One USB port is equipped for USB 2.0 standard use (High/Full/Low Speed). Accepts USB flash drives and similar storage devices for saving data. Do not use during operation in environments with a lot of electromagnetic interference.
- Page 14 2. Component Function (3) DIP switch General-purpose DIP switches. Can be used to acquire setting status from an application. SW No. Action Contents For debugging. Set to ON if displaying U-Boot command prompt. Factory setting. Generally, please set to OFF. This switch is for reserve use.
- Page 15 2. Component Function (7) Reset switch This product is reset. (8) Power supply connector (5VDC IN) Accepts the included connector. Supports AWG 28–16 cables. The fastening torque range is 0.22 to 0.25Nm. Signal Pin No. Meaning name Power supply (5VDC ± 5%) Power supply (GND) Frame ground LED display...
- Page 16 3. Setup 3. Setup Before Using the Product for the First Time Follow the next steps to set up this product: STEP1 Connect cables. Connect correctly to the port or slot as explained in Chapter 2. STEP2 How to mount Follow the instructions in this chapter to mount the unit correctly.
- Page 17 3. Setup Distances between this product and its vicinity CAUTION Do not mount in an airtight container Wall mounting Ensure all other objects are at least 50mm away (left, right, above, below or in front) of the unit. Figure 3.2. Distance around unit for wall mounting Desk mounting Ensure all other objects are at least 50mm away (left, right, above, below or in front) of the unit.
- Page 18 3. Setup Setup of software This document provides a guide for easy software setup. For a more detailed explanation, visit our FAQ site (http://www.contec.co.jp/mc). The root password is "root". Use /dev/mtdblock0 as /. When the data is mounted as read only. To read/write to the data remount with parameters # rommode rw.
- Page 19 3. Setup SSH grants root login permissions to eth0 and eth1. Perform any necessary settings. #vi /etc/ssh/sshd_config <exp> 1 PermitRootLogin no 2 RSAAuthentication yes 3 PubKeyAuthentication yes 4 AuthorizedKeyFiles %h/.ssh/authorized_keys # The login user home directory is %h. 5 ChallengeResponseAuthentication no 6 PasswordAuthentication yes Create an RSA format 2048 bit length password xxxx for public/secret key.
- Page 20 3. Setup About the 100Mbps LAN The factory setting is 100Mbps Full Duplex. If setting to Half Duplex, or resetting Full Duplex, perform the following: Set to 100Mbps Full Duplex setting at /home/rc/local.a. < When setting to 100Mbps Full Duplex (Factory setting)> /usr/sbin/ethtool -s eth0 speed 100 autoneg off /usr/sbin/ethtool -s eth1 speed 100 autoneg off Set any other connected devices or hub to 100Mbps Full Duplex.
- Page 21 3. Setup MC-300B-DC5-455...
- Page 22 4. Specifications 4. Specifications Specifications Hardware and factory settings DIP switch DIP switch initial settings are shown in the figure to the right. SW1:OFF SW2:OFF Figure 4.1. DIP switch Default settings for IP address, etc. Table 4.1. Default Setting Product settings are configured using terminal Setting Default software.
- Page 23 4. Specifications Establishment environment specifications Table 4.3. Installation Environment Requirements Item Contents Operating temperature 0 - 50°C Humidity 10 - 90%RH (No condensation) Floating dust particles Avoid excessive exposure Corrosive gas Avoid exposure Allowable instantaneous Less than 17ms (100VAC at 25°C) voltage drop Automatically reset when low voltage is detected Physical dimensions (mm) 30.0(W) x 72.0(D) x 140.0(H)
- Page 24 4. Specifications Battery Battery Specification This product uses the following battery. - Type : Lithium primary battery - Model : BR-1/2AA - Maker : Panasonic - Nominal voltage : 3V - Nominal capacity : 1000mAh - Lithium content : 1g or less Removing the battery Remove the battery according to the following figure.
- Page 25 3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan Japanese http://www.contec.co.jp/ English http://www.contec.com/ Chinese http://www.contec.com.cn/ No part of this document may be copied or reproduced in any form by any means without prior written consent of CONTEC CO., LTD. [09072016] [05302011] Management No. NA01356 [09072016_rev3] Parts No.
Need help?
Do you have a question about the MC-300 Series and is the answer not in the manual?
Questions and answers