Page 1
Instructions for Use ——Disposable Pen Injector Assembly —— Specification & Model: NIVD series Preparation Time Review Time Approval Time...
Page 2
Wuxi NEST Biotechnology Co., Ltd 1. Preface ................................1 2. Product Introduction ............................1 3. Product Application ............................4 3.1 Preparation ..............................4 3.2 Check the product .............................4 Install the needle ............................ 6 3.4 Perform safety test ............................ 6 3.5 Set the dose ...............................6 3.6 Injection ..............................
Page 3
If any part of your Disposable Pen Injector Assembly is fractured or broken, do not use it and contact the after-sales service center of Wuxi NEST Biotechnology Co., Ltd. or your health care professionals. 2. Product Introduction...
Page 5
Wuxi NEST Biotechnology Co., Ltd NIVD-13 (Purple, 37 units) Structural Diagram: Product Structure: This product consists of the pen injector body, a push block, injection button, dose display window, dose adjustment knob, reservoir and a pen injector cap. Product performance: Main performance: 1.Visual feedback:...
Page 6
Wuxi NEST Biotechnology Co., Ltd The Disposable Pen Injector Assembly is a disposable pen injector designed for single patient use by diabetics for the subcutaneous self-injection of a desired dose insulin. The disposable pen injector assembly uses 3mL cartridge of HUMALOG (U-100,insulin lispro for injecton), and a...
Page 7
Wuxi NEST Biotechnology Co., Ltd Advance the Pen body and reservoir in a straight line to lock them together. Wipe the rubber seal at the end of the cartridge with an alcohol cotton pad. 3.5 Install the needle Only use needles suitable for this product. Use a new sterile needle for each injection.
Page 8
Wuxi NEST Biotechnology Co., Ltd installed in a straight line, the push block will be damaged and the solution will leak out or the needle will be damaged. 3.6 Perform safety test Perform a safety test before each injection to ensure the proper functioning of the injection pen and needle, and to remove air bubbles.
Page 9
Wuxi NEST Biotechnology Co., Ltd NIVD-01 80 units NIVD-02 75 units NIVD-03 74 units NIVD-04 60 units NIVD-05 50 units NIVD-13 37 units During the safety test, the window should display "0". The dose can then be selected. Note: ...
Page 10
Wuxi NEST Biotechnology Co., Ltd Exercise caution when removing and disposing of used needles. Follow recommended safety methods to minimize the risk of needlestick injuries and disease transmission. Replace the pen cap on the pre-filled injection pen. 4. Precautions 4.1 Symbols used on labels...
Page 11
Wuxi NEST Biotechnology Co., Ltd Keep this product out of reach of children. This product is only suitable for pen injector assembly needles. Sharing pen injector assemblies or needles with others is strictly prohibited to prevent cross-infection.
Page 12
Wuxi NEST Biotechnology Co., Ltd Clean the pen cap, pen body, and pen case with a damp cloth. Do not wipe the pen body and dose window with alcohol. Do not use alcohol, hydrogen peroxide, bleach. Do not immerse the pen in liquid or cover it with liquid.
Page 13
[Manufacturer] Wuxi NEST Biotechnology Co., Ltd. [Address of Manufacturing Site] No. 530, Xida Road, Meicun Industrial Park, Xinwu District, Wuxi, Jiangsu, China [After-sales Service Unit] Wuxi NEST Biotechnology Co., Ltd. [Tel] +86-510-6800 6788 / +86-510-6878 8698 [IFU Preparation Date] Aug 14, 2024...
Need help?
Do you have a question about the NIVD Series and is the answer not in the manual?
Questions and answers