ZyXEL Communications GN-680T Datasheet

www.zyxel.com
ZyXEL GN-680T
Gigabit PCI Network Adapter
1. Auto-negotiating 10/100/1000Mbps
2. Automatic MDI/MDIC crossover
4. Support 802.1Q VLAN
5. Support 802.1p priority queue
6. Support ACPI to save power consumption
7. Support WoL(Wake-On-LAN) for remote wake-up
Specifications
Standards compliance
IEEE802.3 10BASE-T Ethernet
-
- IEEE802.3u 100BASE-TX Fast Ethernet
1000Base-T gigabit
-
- ANSI/IEEE802.3 Auto-negotiation
IEEE802.3x Flow Control
-
802.3ab
-
- 802.1p Priority Tagging
802.1q VLANs
-
Data transfer rates
Ethernet 10M/20Mbps(half/full duplex)
-
- Fast Ethernet 100M/200M(half/full duplex)
Gigabit 1000M/2000M (half/full)
-
Interface
- Single port: 10BASE-T, 100BASE-TX &
1000BASE-T Ethernet port
- PCI Bus type
PCI 2.2
-
32 bit at 33MHz or 66MHz
-
Media Interface Exchange
Auto MDI/MDI-X
-
Status LED
LINK/ACT
-
- 10/100/1000Mbps
Cabling
10BASE-T: 2-pair UTP Cat.3, 4, 5 (100 m)
-
EIA/TIA-586 100-ohm STP (100 m)
100BASE-TX: UTP Cat.5 (100 m max.)
-
EIA/TIA-586 100-ohm STP (100 m max.)·
1000BASE-T: UTP Cat.5 (100 m max.)
-
EIA/TIA-586 100-ohm STP (100 m max.)
Performance
QoS: 802.1Q VLAN tagging
-
802.1p, 8-priority queues (VLANs)
Jumbo frame: Up to 7.5KB
-
Power saving
ACPI Ver 2.0WoL
-
Management
- DMI 2.0WfM Baseline V2.0
Physical and Environmental Specifications
Operating temperature: 0℃~45℃ (32ºF to
-
113ºF)
Humidity: 10% to 90% (Non-condensing)
-
- Dimensions:133(L) x 49(W) mm
Weight : 64g
-
System requirement
Gigabit switch(e.g.GS-108A)
-
- Network Cables
Certifications
FCC Class B, CE, C-Tick
-
1/1