Download Print this page
Watts Bradley 8B1 Series Installation Manual
Watts Bradley 8B1 Series Installation Manual

Watts Bradley 8B1 Series Installation Manual

Grab bars

Advertisement

Quick Links

Scan or click code to view
Installation Guide (English)
Read the instructions in this manual before beginning installation. Save these instructions and
refer to them for inspection, maintenance, and troubleshooting information.
For questions regarding the operation, installation or maintenance of this product, visit bradleycorp.com or call 800.BRADLEY (800.272.3539).
Product warranties and parts information may also be found under "Resources" on our website at bradleycorp.com.
P20-249 Rev. C: ECO 23-15-040
© 2024 Bradley
Page 1 of 8
1/19/2024
BERLS.COM
COMMERCIAL
SUPPLY
Scan or click code to view
Installation Guide (French)
(800) 409-3131
Installation
Grab Bars
8B1 Series
Table of Contents
Safety Information ............................................................2
Supplies Required ............................................................2
Available Mounting Kits & Anchoring Devices................2
Components .....................................................................3
Dimensions – 8B1 Series without Hooks ........................4
Installing Grab Bar without Hooks ..................................5
Dimensions – 8B1 Series with Hooks .............................6
Installing Grab Bar with Hooks ........................................7
Cleaning and Maintenance ..............................................8
Scan or click code to view
Installation Guide (Spanish)
Menomonee Falls, WI 53052 USA
800 BRADLEY (800 272 3539)
+1 262 251 6000
bradleycorp.com
129 Oakpark Drive, Unit A, Mooresville, NC 28115
P.O. Box 309

Advertisement

loading
Need help?

Need help?

Do you have a question about the Bradley 8B1 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Watts Bradley 8B1 Series

  • Page 1 Installation Grab Bars 8B1 Series Table of Contents Safety Information ............2 Supplies Required ............2 Available Mounting Kits & Anchoring Devices....2 Components ..............3 Dimensions – 8B1 Series without Hooks ......4 Installing Grab Bar without Hooks ........5 Dimensions – 8B1 Series with Hooks ......6 Installing Grab Bar with Hooks ........7 Cleaning and Maintenance ..........8 Scan or click code to view...
  • Page 2 Grab Bars – 8B1 Series Installation Safety Information WARNING All mounting hardware is supplied by installer and must be appropriate for wall construction. Wall anchors/backing used must provide adequate support for the intended load requirements. Grab bars are no stronger than the anchors and walls to which they are attached, and therefore, must be firmly secured in order to support the intended load requirements.
  • Page 3 Installation Grab Bars – 8B1 Series Components 8B1 Series without Hooks Grab Bar Weldment Standoff 1/4"‑20 Set Screw 8B1 Series with Hooks Standoff Grab Bar Weldment Hook 1/4"‑20 Set Screw Bradley • P20-249 Rev. C: ECO 23-15-040 1/19/2024 BERLS.COM (800) 409-3131 129 Oakpark Drive, Unit A, Mooresville, NC 28115 COMMERCIAL SUPPLY...
  • Page 4 Grab Bars – 8B1 Series Installation Dimensions – 8B1 Series without Hooks (mm) Top View 1‑1/2" (38) 2‑17/32" (65) Back View 1‑15/32" (37) TYP. 25/32" 7/32" (6) Ø 1/4" (7) TYP. (20) TYP. TYP. 1‑3/8" (35) TYP. Side View 1‑9/16" (40) Standoff Finished...
  • Page 5 Installation Grab Bars – 8B1 Series Installing Grab Bar without Hooks Verify all rough-in dimensions prior to installation. WARNING Wall must be reinforced in the area of the grab bar in order to support the load it is intended to support. Mount the standoffs to the surface.
  • Page 6 Grab Bars – 8B1 Series Installation Dimensions – 8B1 Series with Hooks (mm) Top View Back View 1‑3/8" (35) 1‑1/2" (37) TYP. TYP. 7/32" (6) 25/32" (20) TYP. TYP. Ø 1/4" (7) TYP. Side View 3‑13/16" (97) Standoff Finished Floor 1‑1/2"...
  • Page 7 Installation Grab Bars – 8B1 Series Installing Grab Bar with Hooks Verify all rough-in dimensions prior to installation. WARNING Wall must be reinforced in the area of the grab bar in order to support the load it is intended to support. Remove the standoffs with hooks from the Mount the standoffs and hook to the surface.
  • Page 8 Grab Bars – 8B1 Series Installation Cleaning and Maintenance Scan the QR code below to view the Stainless Steel Washroom Accessories document. Bradley • P20-249 Rev. C: ECO 23-15-040 1/19/2024 BERLS.COM (800) 409-3131 129 Oakpark Drive, Unit A, Mooresville, NC 28115 COMMERCIAL SUPPLY...

This manual is also suitable for:

Bradley 8b10011800Bradley 8b10011896Bradley 8b10012400Bradley 8b10012496Bradley 8b10013600Bradley 8b10013696 ... Show all