Summary of Contents for TEC SNR-ACC-200-TEC
- Page 1 TEC Thermoelectric Cooler USER MANUAL MODEL: SNR-ACC-200-TEC ※ please read this manual book before use...
- Page 2 When the DC flow through the circuit, which is formed by different conductor connection in nodes produces endothermic or exothermic phenomenon,this phenomenon called peltier effect .TEC use in this peltier effect . When TEC power on , one side cooling through the fan and the heat sink to absorb heat, contained in the other side of the heating through the fan and heat sink get heat away.
- Page 3 TEC air conditioning user manual 2. Product parameters 2.1. Product technical parameters Dc voltage -58 - -44 power Cooling capacity Heating capacity installation Door Working temperature range -40 - +55 ℃ Ambient humidity 5% - 95% Protection grade IP 55 Noise （dB）...
- Page 4 TEC air conditioning user manual 2.3. Size of product 3. Installation Instruction...
- Page 5 ,According to control the operation of the logic control TEC air conditioning. 5.3. Monitor TEC connect with computer though RS485, user can check system state by monitor background ( including fan , TEC , sensor) and change parameter.
- Page 6 TEC air conditioning user manual 6. Parameter Setting and error code 6.1.Parameter Setting On the main window, you can enter parameter setting menu by pressing ‘M’ key for 5 seconds, the ▲and ▼ keys can change the function code. Pressing “S” key, It will display the parameter value, the value can be modified through the ▲...
- Page 7 TEC air conditioning user manual Range Default Code Parameter Note TE cooling start temperature 22～50 30℃ TE cooling return difference 2～15 6℃ temperature TE heating start temperature -40～20 5℃ TE heating return difference 2～15 10℃ temperature TE work mode when 0～1...
- Page 8 TEC air conditioning user manual 6.2 Error Code The controller will generate an alarm signal if the controller and the parts failed or the temperature is out of range. The alarm lamp on the panel is lit. LED will display the cabinet inside temperature and error code alternately. When the device has multiple alarms, the operator will alternately display the alarm codes.
- Page 9 TEC air conditioning user manual 6.3. State Lights Lamp Indication Lighten Flash Temperature Setting Parameter Selt-Checking Cooling Cooling State ―― Heating Heating State External Fan State ―― Alarm On Alarm...
- Page 10 B. Damage caused by the user’s replacing parts or disassembly, or damage caused for disassembly by non-authorized service; C. Error not from TEC ,such as the fault from user's device, users of software ; D. Physical damage caused during shipment, installation and other improper use (such as the air conditioner cannot be inverted etc.;...
- Page 11 TEC air conditioning user manual...
Need help?
Do you have a question about the SNR-ACC-200-TEC and is the answer not in the manual?
Questions and answers