Solight 1D47A Manual

EN 1D47A
Photoelectric smoke detector
with Wi-Fi connection
Thank you for purchasing our 1D47A Wi-Fi connected home photoelectric smoke detector.
Before installing, using or repairing the equipment, read this manual carefully and pay attention to the safety warnings and instructions.
This will ensure not only the protection of persons, but also the long life of the equipment.
The 1D47A home photoelectric smoke detector with Wi-Fi connection detects the presence of fire by smoke. When smoke reaches a
certain concentration in the room, the detector triggers an acoustic and light warning signal.
This equipment is designed for residential buildings and meets the requirements of EN 14604:2005/AC:2008.
TECHNICAL PARAMETERS
Model
Operating voltage
Battery capacity
Wireless protocol
Frequency range
Version
RF conductive power
Standby current
Signal
Acoustic signal strength
Operating humidity
Battery lifetime
Operating temperature
Installation
Dimensions (L × W × H)
Guidelines
Detector lifetime
SITE SELECTION
The smoke detector should be mounted on the ceiling in the centre of the room at a distance of 150 cm from lights, exhaust fan, air
conditioning outlet/inlet. We recommend installing a smoke detector in every room.
Do not install a smoke detector in the bathroom or other rooms where water condensation occurs.
1D47A
DC 3 V (CR 123A)
1 400 mAh
Wi-Fi + Bluetooth
2 412 - 2 472 GHz
802.11 b/g/n
11b:17 dBm; 11g:15 dBm; 11n:13 dBm
< 9 uA
Acoustic + light + in-app notifications
≥ 85 dB (at a distance of 3 m)
≤ 95% RH (non-condensing)
2 years (average time)
-10 °C - 55 °C
On the ceiling (using screws or adhesive tape)
76 × 76 × 28.5 mm
EN 14604:2005 + AC:2008
10 years
Ceiling
Best here
1 EN
Min. 50 cm
Never here