Do you have a question about the PPS-47 and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Stagecaptain PPS-47
Page 1
Stagecaptain PPS-47 XL Parkplatzschloss Bedienungsanleitung Version: *-05-2022 ArtNr.: 00086301 Diese Bedienungsanleitung ist urheberrechtlich geschützt. Die Vervielfältigung dieser Bedienungsanleitung, auch auszugsweise, ist nur mit Genehmigung der Musikhaus Kirstein GmbH gestattet. Gleiches gilt für die Vervielfältigung oder das Kopieren von Bildern, auch in geänderter Form.
Page 2
Vielen Dank, dass Sie sich für dieses Parkplatz-Schloss entschieden haben. Um sicherzustellen, dass Sie mit diesem Produkt voll und ganz zufrieden sind, lesen Sie diese Bedienungsanleitung sorgfältig, bevor Sie unser Produkt verwenden. Bewahren Sie diese Bedienungsanleitung an einem sicheren Ort auf. Die Bedienungsanleitung muss an alle nachfolgenden Anwender weitergegeben werden.
Page 3
Benötigtes Werkzeug zur Installation Bohrmaschine, 12mm Betonbohrer, Hammer (idealerweise Gummihammer), Steckschlüssel oder beiliegenden Gabelschlüssel Bodenfixierung Schritt 1: Platzieren Sie das Parkplatz-Schloss an der gewünschten Stelle und markieren Sie die 3 Bohrlöcher mit dem Bohrer oder einem Filzstift Schritt 2: Entfernen Sie das Schloss wieder und bohren Sie sorgfältig und gerade die 3 Löcher (Bohrtiefe Mindestens 10 cm)
Page 4
Schritt 3: Legen Sie nun das Parkschloss bündig über die Löcher, setzen die Spreizbolzen ein und klopfen diese mit dem Hammer (idealweiser Gummihammer) in die vorgesehenen Löcher. Schritt 4: Ziehen Sie die Spreizbolzen mit dem Gabelschlüssel fest. Durch das Hineindrehen spreizen sich die Bolzen und sorgen für festen Halt. Die Parkplatzsperre aktivieren Aufklappen und Umlegen des Bügels 1.
Page 5
Einsatzbedingung und Wartung Ihr Gerät erfordert keine besondere Wartung. Hin und wieder empfiehlt es sich einen Tropfen Scharnier-Öl/Silikonöl an die Gelenke und den Bolzen am Schliessmechanismus zu geben. Da das Parkplatzschloss NICHT aus rostfreiem Stahl besteht, ist es vorwiegend für den Indoorgebrauch (Tiefgarage, Garage, Überdachte Parkplätze) vorgesehen.
Page 6
Stagecaptain PPS-47 XL Parking Lock item No.: 00086301 Operating instructions Version: *-05-2022 These operating instructions are protected by copyright. Reproduction of these operating instructions, even in part, is only permitted with the permission of Musikhaus Kirstein GmbH. The same applies to the reproduction or copying of pictures, even in modified form.
Page 7
Thank you for choosing this car park lock. To ensure that you are fully satisfied with this product, please read these operating instructions carefully before using our product. Keep these operating instructions in a safe place. The operating instructions must be passed on to all subsequent users. Follow the operating instructions! The signal word WARNING indicates hazards that can lead to serious injuries if no precautionary measures are taken.
Page 8
Tools required for installation Drill, 12mm concrete drill bit, hammer (ideally rubber mallet), socket spanner or open-ended spanner (provided in delivery) Floor fixation Step 1: Place the car park lock in the desired location and mark the 3 drill holes with the drill or a felt-tip pen.
Page 9
Step 3: Now place the parking lock base over the holes, insert the expansion bolts and tap them into the holes provided with a hammer (ideally a rubber mallet). Step 4: Tighten the expansion bolts with the open-ended spanner. By screwing in, the bolts spread and provide a firm hold.
Page 10
Condition of use and Maintenance Your unit does not require any special maintenance. From time to time it is advisable to apply a drop of hinge oil/silicone oil to the joints and the bolt on the closing mechanism. As the car park lock is NOT made of stainless steel, it is mainly intended for indoor use (underground car park, garage, covered parking spaces).
Need help?
Do you have a question about the PPS-47 and is the answer not in the manual?
Questions and answers